Skip to main content
Chemistry LibreTexts

4.4: Characteristic of the SN2 Reaction

  • Page ID
    227557
  • Learning Objectives

    • determine the rate law & predict the mechanism based on its rate equation or reaction data for SN2 reactions
    • propose mechanisms for SN2 reactions
    • draw and interpret Reaction Energy Diagrams for SN2 reactions

    Introduction

    In many ways, the proton transfer process of a Brønsted-Lowry acid-base reaction can be thought of as simply a special kind of nucleophilic substitution reaction, one in which the electrophile is a hydrogen rather than a carbon.

    image002.png

    In both reaction types, we are looking at very similar players: an electron-rich species (the nucleophile/base) reacts with an electron-poor species (the electrophile/proton), driving off the leaving group/conjugate base.

    In the next few sections, we are going to be discussing some general aspects of nucleophilic substitution reactions, and in doing so it will simplify things greatly if we can use some abbreviations and generalizations before we dive into real examples.

    What is a nucleophile (Nu)?

    Instead of showing a specific nucleophile like hydroxide, we will simply refer to the nucleophilic reactant as 'Nu'. Nucleophilic functional groups are those which have electron-rich atoms able to donate a pair of electrons to form a new covalent bond. Nucleophiles can be negatively charged and some that are neutral molecules with lone pair electrons. In both laboratory and biological organic chemistry, the most relevant nucleophilic atoms are oxygen, nitrogen, and sulfur, and the most common nucleophilic functional groups are water, alcohols, phenols, amines, thiols, and occasionally carboxylates.

    When thinking about nucleophiles, the first thing to recognize is that, for the most part, the same quality of 'electron-richness' that makes a something nucleophilic also makes it basic: nucleophiles can be bases, and bases can be nucleophiles. It should not be surprising, then, that most of the trends in basicity that we have already discussed also apply to nucleophilicity.

    Some confusion in distinguishing basicity (base strength) and nucleophilicity (nucleophile strength) is inevitable. Since basicity is a less troublesome concept; it is convenient to start with it. Basicity refers to the ability of a base to accept a proton. Basicity may be related to the pKa of the corresponding conjugate acid, as shown below. The strongest bases have the weakest conjugate acids and vice versa.

    Nucleophilicity is a more complex property. It commonly refers to the rate of substitution reactions at the halogen-bearing carbon atom of a reference alkyl halide, such as CH3-Br. Thus the nucleophilicity of the Nu:(–) reactant in the following substitution reaction varies as shown in the chart below:

    Nucleophilicity: CH3CO2 (–) < Cl(–) < Br(–) < N3(–) < CH3O(–) < CN(–) < I(–) < CH3S(–)

    nucleophilicity arrow.png

    What is a Leaving Group (X or LG)?

    In a similar fashion, we will call the leaving group 'X' for halogens as is customary. For other reactions, it will be more accurate to abbreviate the leaving group as "LG". The context of the reaction will dictate the abbreviation. Leaving groups are sometimes negatively charged, sometimes neutral, and sometimes positively charged. Therefore, in this general picture we will not include a charge designation on the 'X' or 'LG' species. In referring to the comparison between acid-base chemistry and substitution reactions, the stability of the leaving group is evaluated the same way we evaluate the stability of conjugate bases.

    When comparing the reactivity of electrophiles that vary only in their leaving groups, then leaving group stability plays a dominant role. The electrophile with the more stable leaving group will be favored. The lower the electron density of the leaving group, the more stable it is. Neutral leaving groups are favoring over charged leaving groups. When comparing charged leaving groups, apply the concepts used to determine the relative stability of conjugate bases:

    1) identity or identities of the atom(s) holding the charge

    2) delocalization of the charge via resonance

    3) inductive effects

    4) orbital hybridization

    What is an Electrophile (E) or the Substrate (S)?

    An electrophile  accepts electrons, so it is an species that contains a carbon atom with electron deficiency. Electrophiles (E) are sometimes protonated and sometimes neutral. Electrophiles can also be called "Substrates". ectrophilicity of alkyl halides comes from the polar carbon-halogen bond.

    Since nucleophiles, leaving groups, and electrons may be charged or neutral, we will not include charges on 'Nu' or 'X' (or 'LG') or 'E'.

    We will generalize the three other groups bonded on the electrophilic alpha-carbon as R1, R2, and R3: these symbols could represent hydrogens as well as alkyl groups. Finally, in order to keep figures from becoming too crowded, we will use in most cases the line structure convention in which the central, electrophilic carbon is not drawn out as a 'C'.

    Here, then, is the generalized picture of a nucleophilic substitution is reaction:

    image004.png

     

    Alkyl halides are good substrates for nucleophilic substitution, due to the electrophilicity of the carbon atom attached to the halogen. The common halogens being fluorine, chlorine, bromine and iodine. With the exception of iodine, these halogens have electronegativities significantly greater than carbon. Consequently, this functional group is polarized so that the carbon is electrophilic and the halogen is nucleophilic. Two characteristics other than electronegativity also have an important influence on the chemical behavior of these compounds. The first of these is covalent bond strength. The strongest of the carbon-halogen covalent bonds is that to fluorine. Because of this, alkyl fluorides and fluorocarbons in general are chemically and thermodynamically quite stable, and do not share any of the reactivity patterns shown by the other alkyl halides. The second factor to be considered is the relative stability of the corresponding halide anions, which is likely the form in which these electronegative atoms will be replaced. This stability may be estimated from the relative acidities of the H-X acids, assuming that the strongest acid releases the most stable conjugate base (halide anion). With the exception of HF (pKa = 3.2), all the hydrohalic acids are very strong, small differences being in the direction HCl < HBr < HI.

    Exercise

    1. Since everything is relative in chemistry, one reaction's nucleophile can be another reaction's leaving group. Some functional groups can only react as a nuclephile or electrophile, while other functional groups can react as either a nuclephile or electrophile depending on the reaction conditions. Classify the following compounds as nucleophiles, electrophiles, or leaving groups. More than one answer may be possible.

    a) bromoethane

    b) hydroxide

    c) water

    d) chlorocyclohexane

    e) ethanol

    f) bromide

    Answer

    a) electrophile (Alkyl halides are always electrophiles - one reason they are an o-chem student's best friend.)

    b) strong nucleophile

    c) weak nucleophile and good leaving group

    d) electrophile (Alkyl halides are always electrophiles - one reason they are an o-chem student's best friend.)

    e) weak nucleophile, a poor electrophile without clever chemistry (stay tuned for future chapters), good leaving group

    f) good nucleophile and a good leaving group

    The SN2 mechanism

    There are two mechanistic models for how an alkyl halide can undergo nucleophilic substitution, SN2 and SN1. The SN2 reaction takes place in a single step with bond-forming and bond-breaking occurring simultaneously. (In all figures in this section, 'X' indicates a halogen substituent).

    image016.png

    This is called an 'SN2' mechanism. In the term SN2, S stands for 'substitution', the subscript N stands for 'nucleophilic', and the number 2 refers to the fact that it is a bimolecular reaction: the overall rate depends on a step in which two separate molecules (the nucleophile and the electrophile) collide. A potential energy diagram for this reaction shows the transition state (TS) as the highest point on the pathway from reactants to products.

    image012.png

    If you look carefully at the progress of the SN2 reaction, you will realize something very important about the outcome. The nucleophile, being an electron-rich species, must react with the electrophilic carbon from the back side relative to the location of the leaving group. Approach from the front side simply doesn't work: the electron rich, leaving group blocks the way with electrostatic repulsion and steric hindrance.

    Sn2 stereochem intro.png

    The result of this backside penetration is that the stereochemical configuration at the central carbon inverts as the reaction proceeds. In a sense, the molecule is turned inside out. At the transition state, the electrophilic carbon and the three 'R' substituents all lie on the same plane.

    image016.png

    What this means is that SN2 reactions are inherently stereoselective: when the substitution takes place at a stereocenter, we can confidently predict the stereochemical configuration of the product. Below is an animation illustrating the principles we have just learned, showing the SN2 reaction between hydroxide ion and methyl iodide. Notice how backside attack by the hydroxide nucleophile results in inversion at the tetrahedral carbon electrophile.

    sn2.gif

    Exercise

    2. Predict the structure of the product in this SN2 reaction. Be sure to specify stereochemistry.

    image018.png

    Solution

    2.

    ch 7 sect5 exer 1 solution.png

    SN2 Reactions Occur at sp3 Carbons with a Leaving Group

    One more important point must be made before continuing: nucleophilic substitutions as a rule occur at sp3-hybridized carbons bonded to a leaving group. SN2 reactions cannot occur where the leaving group is attached to an sp2-hybridized carbon:

    image032.png

    Bonds on sp2-hybridized carbons are inherently shorter and stronger than bonds on sp3-hybridized carbons, meaning that it is harder to break the C-X bond in these substrates. SN2 reactions of this type are unlikely also because the (hypothetical) electrophilic carbon is protected from nucleophilic attack by electron density in the p bond.

     

    Exercise

    3. Predict which alkyl halides can undergo a SN2 reaction.

    a) C6H5Br

    b) CH3CH2CH2Br

    c) CH2CHBr

    d) CH3CH2CH2CHBrCH3

    Solutions
    3.
    a) No, sp2 carbon
    b) Yes, primary alkyl halide
    c) No, sp2 carbon
    d) Yes, secondary alkyl halide

    SN2 Reaction Kinetics

    In the term SN2, the S stands for substitution, the N stands for nucleophilic, and the number two stands for bimolecular, meaning there are two molecules involved in the rate determining step. The rate of bimolecular nucleophilic substitution reactions depends on the concentration of both the haloalkane and the nucleophile. To understand how the rate depends on the concentrations of both the haloalkane and the nucleophile, let us look at the following example. The hydroxide ion is the nucleophile and methyl iodide is the haloalkane.

    Haloalkanes 05.bmp

    If we were to double the concentration of either the haloalkane or the nucleophile, we can see that the rate of the reaction would proceed twice as fast as the initial rate.

    Haloalkanes 06.bmp

    If we were to double the concentration of both the haloalkane and the nucleophile, we can see that the rate of the reaction would proceed four times as fast as the initial rate.

    Haloalkanes 07.bmp

    The bimolecular nucleophilic substitution reaction follows second-order kinetics; that is, the rate of the reaction depends on the concentration of two first-order reactants. In the case of bimolecular nucleophilic substitution, these two reactants are the haloalkane and the nucleophile. For further clarification on reaction kinetics, the following links may facilitate your understanding of rate laws, rate constants, and second-order kinetics

    Exercise

    4. The reaction below follows the SN2 mechanism.

    ch 7 sect 5 exer 3.png

    a) Write the rate law for this reaction.

    b) Determine the value of the rate coefficient, k, if the initial concentrations are 0.01 M CH3Cl, 0.01 M NaOH, and the initial reaction rate is 6 x 10-10 M/s.

    c) Calculate the initial reaction rate if the initial reactant concentrations are changed to 0.02 M CH3Cl and 0.0005 M NaOH.

     

    Solutions

    4.

    a) rate = k [CH3Cl] [OH-]

    b) substitute the data into the rate expression above and apply algebra to solve for k

    k = 6 x 10-6 Lmol-1s-1

    c) Using the rate law above, substitute the value for k from the previous question along with the new concentrations to determine the new initial rate.

    rate = 6 x 10-10 M/s

    Contributors and Attributions