Gas Equilibrium Constants: Kc And Kp
- Page ID
- 1370
\(K_c\) and \(K_p\) are the equilibrium constants of gaseous mixtures. However, the difference between the two constants is that \(K_c\) is defined by molar concentrations, whereas \(K_p\) is defined by the partial pressures of the gasses inside a closed system. The equilibrium constants do not include the concentrations of single components such as liquids and solid, and they do not have any units.
How To Write Gas Equilibrium Constants
Here are some easy steps on writing Gas Equilibrium Constants (this is the same for finding K_{c}, K_{p}, K_{sp}, Q and etc.):
- In equilibrium equations, even though the arrows point both ways (\( \rightleftharpoons \)) we usually associate the left as reactants and the right as products.
- The products are on the TOP of the fraction (the numerator).
- The reactants are on the BOTTOM of the fraction (the denominator).
- The concentrations of the products and reactants are always raised to the power of their coefficient in the balanced chemical equation.
- If any of the reactants or products are solids or liquids, their concentrations are equal to one because they are pure substances. (see Solubility Product Constant, K_{sp})
The standard example of writing Gas Equilibrium Constants are:
\[ \ aA + bB \; \rightleftharpoons \; cC + dD \]
\[ K_c = \dfrac{[C]^{c}[D]^{d}}{[A]^{a}[B]^{b}} \]
\[ K_p = \dfrac{(C)^{c}(D)^{d}} {(A)^{a}(B)^{b}} \]
Example 1: Thermal Decomposition of \( NH_4SH_{(s)} \) |
---|
Consider the thermal decomposition of \( NH_4SH_{(s)} \): \[ NH_4SH_{(s)} \rightleftharpoons NH_{3 (g)} + H_2S_{(g)} \] This also is related to K_{sp} \[ K_c = \dfrac{[NH_{3}][H_{2}S]}{[NH_{4}SH]} \] but since \(NH_4SH\) is a solid, we get: \[ K_c = \dfrac{[NH_{3}][H_{2}S]}{[1]} \] \[ K_c = [NH_{3}][H_{2}S] \] As for K_{p}, it is the same as K_{c}, but instead of brackets [ ], K_{p} uses parentheses ( ): \[ K_p = \dfrac{(NH_{3})(H_{2}S)}{(NH_{4}SH)} \] \[ K_p = \dfrac{(NH_{3})(H_{2}S)}{(1)} \] \[ K_p = (NH_{3})(H_{2}S) \] |
Example 2: Hydrogen and Iodine |
---|
Consider the double replacement reaction of hydrogen and iodine gas: \[ H_2 (g) + I_2 (g) \rightleftharpoons 2HI (g) \] \[ K_c = \dfrac{[HI]^{2}}{[H_{2}][I_{2}]} \] \[ K_p = \dfrac{(HI)^{2}}{(H_{2})(I_{2})} \] |
Definition of \(K_c\) and \(K_p\)
\(K_c\) is an equilibrium constant in terms of molar concentrations and is usually defined as:
\[ K_c = \dfrac{[C]^{c}[D]^{d}}{[A]^{a}[B]^{b}} \]
in the general reaction,
\[ aA + bB \rightleftharpoons cC + dD\]
If a large \(K_c\) is formed then there are more products formed. Inversely, a small \(K_c\) indicates that the reaction favors the reactants.
\(K_p\) is an equilibrium constant in terms of partial pressures. and is usually defined as:
\[ K_p = \dfrac{(C)^{c}(D)^{d}}{(A)^{a}(B)^{b}} \]
for the general reaction
\[ aA + bB \rightleftharpoons cC + dD \]
Homogeneous Equilibria: Reactants/Products all in a single phase. For example:
\[A_{(g)} + B_{(g)} \rightleftharpoons C_{(g)} + D_{(g)}\]
Heterogeneous Equilibria: Reactants/Products in more than one phase. For example:
\[A_{(s)} + B_{(g)} \rightleftharpoons C_{(g)} + D_{(s)}\]
The relationship between the two equilibrium constants are:
\[ K_p = K_c (RT)^{ \Delta{n}} \]
or
\[K_c = \dfrac{K_p}{(RT)^{ \Delta{n}}}\]
where,
- \( \Delta n \) = (Total moles of gas on the products side) - (Total moles of gas on the reactants side). Hence \( \Delta = (d + c) - (a + b)\] [The lower case numbers are the exponents]
- \(R\) is the gas constant found in the ideal gas law (\(0.0821 \; \dfrac{Liter \; Atm}{Mole \; Kelvin}\))
Relating Gas Equilibrium Constants to Equilibrium (K)
The value of K depends on whether the solution being calculated for is using concentrations or partial pressures. The gas equilibrium constants relate to the equilibrium (K) because they are both derived from the ideal gas law (PV = nRT).
\(K_c\) is the concentration of the reaction, it is usually shown as:
\[ \dfrac{c[C]c[D]}{c[A]c[B]} \]
\(K_p\) is the amount of partial pressure in the reaction, usually shown as:
\[ \dfrac{p(C)p(D)}{p(A)p(B)} \]
As we have seen above, K_{p} = K_{c} (RT)^{\(\Delta{n}\)},we can derive this formula from the Ideal Gas Law.
We know that K_{c} is in terms Molarity \(\left(\dfrac{Moles}{Liters}\right)\), and we can also arrange the Ideal Gas Law (PV = nRT) as: \(\left(\dfrac{n}{L}\right) = \left(\dfrac{P}{RT}\right)\).
We know that Partial Pressure is directly proportional to Concentration:
\(P = \left(\dfrac{n}{L}\right) * RT\) Pressure can be in units of: Pascal (Pa), Atmosphere (atm), or Torr.
Therefore we can replace K_{c} with Molarity: the equation become, K_{p} = K_{c} (RT)^{\(\Delta{n}\)}
(RT)^{\(\Delta{n}\)} = \(\dfrac{(RT)^{c}(RT)^{d}}{(RT)^{a}(RT)^{b}}\)
Also: \(\left(\dfrac{n}{L}\right) = \left(\dfrac{P}{RT}\right)\), can be shown as K_{c} = K_{p} (RT)
K is also written the same as K_{c} and K_{p}:
\(\ aA + bB \rightleftharpoons cC + dD\).
\( K = \dfrac{[C]^{c}[D]^{d}}{[A]^{a}[B]^{b}}\)
Example 3 |
---|
\[ 2 NOBr_{(g)} \rightleftharpoons 2 NO_{(s)} + Br_{2 (g)} \] Given: NOBr= 0.46 M NO= 0.1 M Br_{2} = 0.3M To set up K_{c}, it is \(\dfrac{Products}{Reactants}\) \[ K_{c}= \dfrac{[NO]^2 \; [Br_{2}]}{[NOBr]^2}\] \[ K_{c} =\dfrac{[0.1]^2 \; [0.3]}{[0.46]^2}\] Answer: K_{c}= 0.0142 M |
Example 4 |
---|
Examples of K_{p} This is an example of K_{p} done by Dr. Enderle on youtube. |
Example 5 |
---|
N_{2}O_{4} (l) is an important component of rocket fuel, At 25 ^{\(\circ\)}C N_{2}O_{4} is a colorless gas that partially dissociates into NO_{2}. The color of an equilibrium mixture of these 2 gasses depends on their relative proportions, which are dependent on temperature. Equilibrium is established in the reaction \( N_2O_4 (g) \rightleftharpoons 2NO_2 (g) \) at 25 °C. Given: 3.00 L container What is the K_{c} for this reaction? Step 1: Convert grams to moles mol N_{2}O_{4} = 7.64 g * \( \dfrac{1 mol N_2 O_4}{92.01 g} \) = 8.303 * 10^{-2} mol mol NO_{2} = 1.56 g * \( \dfrac{1 mol NO_2}{46.01 g} \) = 3.391 * 10^{-2} mol Step 2: Convert moles to Molarity (moles/L) [N_{2}O_{4}] M_{ = }\(\dfrac{8.303 * 10^{-2} mol N_{2}O_{4}}{3.00 L}\) = 0.0277 M [NO_{2}] M = \(\dfrac{3.391 * 10^{-2} mol NO_{2}}{3.00 L}\) = 0.0113 M Step 3: Write the Equilibrium constant for K_{c}: \[K_{c} = \dfrac{[NO_{2}]^{2}}{[N_{2}O_{4}]} = \dfrac{[0.0113]^{2}}{[0.0277]} = 4.61 \times 10^{-3}\] |
Given: N_{2}= 0.79 moles
O_{2 }= 0.21 moles
Temp = 2500 K
When equilibrium is established the mole percent of Nitrogen Oxide (NO) at 1.8%
Calculate K_{p} for the reaction
\[N_{2(g)} + O_{2(g)} \rightleftharpoons 2NO_{(g)}\]
1st step: Create an ICE table:
\[N_{2(g)} + O_{2(g)} \rightleftharpoons 2NO_{(g)}\]
ICE | \(N_2\) | \(O_2\) | \(NO\) |
Initial | 0.79 mol | 0.21 mol | 0 mol |
Change | -x | -x | +2x |
Equilibrium | (0.79 - x) | (0.21 - x) | (2x + 0) |
2nd Step: Find the Mole Percent (%) of products
X_{NO}= 0.018
X_{total} = (0.79-x)+(.021-x)+(2x)= 1
X_{NO} = \(\dfrac{2x}{X_{total}}\)
0.018 = \(\dfrac{2x}{1}\)
x = 0.009
3rd Step: Set up an equation
K_{p} = \(\dfrac{p(NO)^{2}}{p(N_{2})p(O_{2})}\)
PV = NRT
\(P = \dfrac{\dfrac{[n(NO)(RT)]^{2}}{V^{2}}}{\dfrac{n(N_{2})(RT)}{V}\dfrac{n(O_{2})(RT)}{V}}\)
[Volume Cancels out]
\(P = \dfrac{n(NO)^{2}}{n(N_{2})n(O_{2})}\)
4th Step: Plug in values
\(K_{P} = \dfrac{(2x)^{2}}{(0.79-x)(0.21-x)}\)
x = 0.009
K_{p} = 2.1x10^{-3}
Template:ExampleEnd
How the Gas Equilibrium Constants Relate to Reaction Quotient (Q)
The process of finding the Reaction Quotient (Q_{c}) is the same as finding K_{c} and K_{p}, where the products of the reaction is divided by the reactants of the reaction \(\left(\dfrac{Products}{Reactants}\right)\) at any time not necessarily at equilibrium.
If a problem asks you to find which way the reaction will shift in order to achieve equilibrium, and K is given, you would have to calculate for Q and compare the two numbers.
When comparing K and Q:
- K < Q : Since there are more products than reactants, the reaction will produce more reactants to reach equilibrium, the reaction favors the reactants.
- K > Q : Since there are more reactants than products, the reaction will produce more products to reach equilibrium, the reaction favors the products.
- K = Q : There is no change in the products nor reactants, so equilibrium is achieved.
A trick to remember to which what the reaction will favor is:
Put:
K _ Q (in alphabetical order! - or it will not work)
K < Q : K \(\leftarrow\) Q
The reaction will favor the reactants because reactants are on the left of the equation.
K > Q : K \(\rightarrow\) Q
The reaction will favor the products because products are on the right of the equation.
K = Q : NO CHANGE
(See Relationship Between K and Q for more information)
Example 7: Relating K to Q |
---|
\[ CO (g) + H_2O (g) \rightleftharpoons CO_2 (g) + H_2 (g) \] Given: K_{c} = 1.00 at about 1100 K CO = 1.00 mol H_{2}O = 1.00 mol CO_{2} = 2.00 mol H_{2} = 2.00 mol Step 1: Write out the expression for Q_{c} \[ Q_c = \dfrac{[CO_2][H_2]}{[CO][H_2O]} \] Step 2: Plug in the number of Molarity, since volume is not given, assume it is 1 Liters \[ Q_c = \dfrac{[2.00][2.00]}{[1.00][1.00]} \] \[ Q_c = 4.00 \] Step 3: Compare K_{c} with Q_{c} K_{c} = 1.00 (unitless) Q_{c} = 4.00 (unitless) K_{c} < Q_{c} 1.00 < 4.00 Therefore, the reaction will shift to the LEFT towards the reactants. |
Example 8 |
---|
A mixture of hydrogen, iodine, and hydrogen iodide, each at 0.0020 M, was introduced into a container heated to 783 Kelvins. At this temperature \(K_c = 46\), Predict if more HI or less will be formed. Step 1: Write out the reaction \[ H_2 (g) + I_2 (g) \leftrightharpoons 2HI (g) \] Step 2: Write out the expression for Q_{c} \[ Q_c = \dfrac{[HI]^2}{[I_2][H_2]} \] Step 3: Plug in the Molarity given Molarity = 0.0020 M \[ Q_c = \dfrac{[0.0020]^{2}}{[0.0020][0.0020]} \] \[ Q_{c} = 1.00 \] Step 4: Compare K_{c} with Q_{c} K_{c} = 46 (unitless) Q_{c} = 1.00 (unitless) K_{c} > Q_{c} 46 > 1.00 The reaction will shift to the RIGHT towards the products. Therefore, more HI will be produced. |
Activity - A Brief Overview
When calculating equilibrium constants, solids and liquids are mostly omitted because they are considered pure substances. Pure substances do not have a change in concentration. Though pure substances are omitted in equilibrium constants, they are still necessary components of the chemical equation (see Activity).
References
- Petrucci, Ralph H., et al. General Chemistry: Principles and Modern Applications Ninth Edition. New Jersey: Pearson Prentice Hall, 2007. Print. (Pages 629-634 & problems/examples)
- Correia, Paiva, and Gil. "The Right Shift? A Problem in Chemical Equilibrium." Journal of Chemical Education: Journal 75.5 (2002) : 583. Web. May 1 2002. Link to this journal: http://pubs.acs.org/doi/abs/10.1021/ed079p583
- Rosenberg, Epstein, Krieger. College Chemistry 9th Edition. USA: The McGraw-Hill Companies, Inc. 2007
- Atkins, Peter and Jones, Loretta. Chemistry: Molecules, Matter, and Change Third Edition. USA: Second Printing, 1989. Print. (an image (modified it a little bit) and an example)
- Robinson, William R., Odom, Jerome D., and Holtzclaw, Henry F. Jr. Chemistry: Concepts and Models. Lexington, MA: D.C. Heath and Company, 1992. Print.
Outside Links
- http://en.wikipedia.org/wiki/Equilibrium_constant
- http://en.wikipedia.org/wiki/Determination_of_equilibrium_constants
- http://www.youtube.com/watch?v=pnZpn9N8XbU (The youtube video about: K_{c} vs. K_{p})
- http://www.youtube.com/watch?v=W7NyGbI2Q1Q&feature=related (Dr. Enderle's example on K_{p})
- http://library.thinkquest.org/C006669/data/Chem/equilibrium/gas.html (On how to write equilibrium constants)
- http://www.chem.purdue.edu/gchelp/howtosolveit/Equilibrium/Calculating_Equilibrium_Constants.htm
- http://www.tutorvista.com/content/chemistry/chemistry-iii/equilibrium/reaction-quotient.php
- http://web.mst.edu/~gbert/LeChatelier/RxQuotient.html
- http://www.chemguide.co.uk/physical/equilibria/kp.html#top (more information about K_{p})
- http://www.chemguide.co.uk/physical/equilibria/kc.html (more information about K_{c})
Problems
Below are practice problems for K_{c} and K_{p}:
K_{c}
1. Gaseous Hydrogen Iodide is placed in a closed container at 425 ^{\(\circ\)}C, Where it partially decomposes to Hydrogen and Iodine:
2HI (g) \(\rightleftharpoons\) H_{2} (g) + I_{2} (g)
The following are given:
[HI] = 3.53 * 10^{-3} M [H_{2}] = 4.79 * 10^{-4} M [I_{2}] = 4.79 * 10^{-4} M
What is the value of K_{c} at this temperature?
2. Write the K_{c} for the reaction and state where the reaction is Homogeneous or Heterogeneous.
a) N_{2} (g) + O_{2} (g) \(\rightleftharpoons\) 2NO (g)
b) FeO (s) + H_{2} (g) \(\rightleftharpoons\) Fe (s) + H_{2}O (g)
3. Determine values of K_{c} from the K_{p} value given: (number 7 from p. 655 in the textbook)
2NO (g) + O_{2} (g) \(\rightleftharpoons\) 2NO_{2} (g); Kp = 1.48 * 10^{4} at 184 ^{\(\circ\)}C
K_{p}
1. Write the K_{p} for the reaction and state where the reaction is Homogeneous or Heterogeneous.
a) 2C_{2}H_{4} (g) + 2H_{2}O (g) \(\rightleftharpoons\) 2C_{2}H_{6} (g) + O_{2} (g)
b) Ti (s) + 2Cl_{2} (g) \(\rightleftharpoons\) TiCl_{4} (g)
2. Determine values of K_{p} from the K_{c} value given: (number 8 from p. 655 in the textbook)
2H_{2}S (g) + CH_{4} (g) \(\rightleftharpoons\) 4H_{2} (g) + CS_{2} (g); K_{c} = 5.27 * 10^{-8} at 973 K.
3. The two common chlorides of Phosphorus, PCl_{3} and PCl_{5}, both important in the production of other phosphorous compounds, coexist in equilibrium through: (number 17 from p. 655 in the textbook)
PCl_{3} (g) + Cl_{2} (g) \(\rightleftharpoons\) PCl_{5} (g)
At 250 ^{\(\circ\)}C, an equilibrium mixture in a 2.50 L flask contains 0.105 g PCl_{5}, 0.220 g PCl_{3}, and 2.12 g Cl_{2}. What are the values of (a) Kc and (b) Kp for this reaction?
Answers
K_{c}
1. 2HI (g) \(\rightleftharpoons\) H_{2} (g) + I_{2} (g)
[HI] = 3.53 * 10^{-3} M [H_{2}] = 4.79 * 10^{-4} M [I_{2}] = 4.79 * 10^{-4} M
K_{c }= \(\dfrac{[H_{2}][I_{2}]}{[HI]^{2}}\)
K_{c }= \(\dfrac{[4.79 * 10^{-4} M][4.79 * 10^{-4} M]}{[3.53 * 10^{-3} M]^{2}}\)
K_{c} = \(\dfrac{[2.29441 * 10^{-7}] M^{2}}{[1.24609 * 10^{-5}] M^{2}}\)
K_{c} = 1.841 * 10^{-2}
2. a) N_{2} (g) + O_{2} (g) \(\rightleftharpoons\) 2NO (g)
K_{c} = \(\dfrac{[NO]^{2}}{[N_{2}][O_{2}]}\)
The reaction is a homogeneous reaction because the reactants/products all have the same phase.
b) FeO (s) + H_{2} (g) \(\rightleftharpoons\) Fe (s) + H_{2}O (g)
K_{c} = \(\dfrac{[H_{2}O]}{[H_{2}]}\), FeO and Fe are solids so they are no included in equilibrium constants.
The reaction is a heterogeneous reaction because the reactants/products have different phases.
3. Converting to K_{c} from K_{p} (number 7 from p. 655 in the textbook)
2NO (g) + O_{2} (g) \(\rightleftharpoons\) 2NO_{2} (g)
Kp = 1.48 * 10^{4} at 184 ^{\(\circ\)}C
We know that K_{p} = K_{c} (RT)^{\(\Delta{n}\)}, we are given K_{p} but not K_{c}, you can rearrange the equation to: \(K_{c} = \dfrac{K_{p}}{(RT)^{-\Delta{n}}}\)
Which can also be written as: K_{c} = K_{p} (RT)^{-\(\Delta{n}\)}
Now that we have your formula, we need to convert 184 ^{\(\circ\)}C to Kelvin, K = 184 + 273 = 457K
K_{c} = \(\dfrac{[NO_{2}]^{2}}{[NO]^{2}[O_{2}]}\)
-\(\Delta{n}\) = (total number of moles of products) - (total number of moles in reactants)
-\(\Delta{n}\) = (2) - (3) = -1
\(\Delta{n}\) = -(-1)
R = 0.08206 \(\dfrac{Liter \; Atm}{Mole \; Kelvin}\)
Now, plug in all the numbers we found: K_{c} = K_{p} (RT)^{-\(\Delta{n}\)}
K_{c} = (1.48 * 10^{4})[(0.08206)(457K)]^{-(-1)}
K_{c} = 5.5 * 10^{5}
[it would be the same if you used this equation: K_{c} = K_{p }(RT)]
K_{p}
1. a) 2C_{2}H_{4} (g) + 2H_{2}O (g) \(\rightleftharpoons\) 2C_{2}H_{6} (g) + O_{2} (g)
K_{p} = \(\dfrac{[C_{_}{2}H_{6}]^{2}[O_{2}]}{[C_{2}H_{4}]^{2}[H_{2}O]^{2}}\)
The reaction is a homogeneous reaction because the reactants/products all have the same phase.
b) Ti (s) + 2Cl_{2} (g) \(\rightleftharpoons\) TiCl_{4} (g)
K_{p} = \(\dfrac{[TiCl_{4}]}{[Cl_{2}]^{2}}\), Ti is a solid so it is not included in equilibrium constants.
The reaction is a heterogeneous reaction because the reactants/products have different phases.
2. Find K_{p}, when K_{c} is given: (number 8 from p. 655 in the textbook)
2H_{2}S (g) + CH_{4} (g) \(\rightleftharpoons\) 4H_{2} (g) + CS_{2} (g)
K_{c} = 5.27 * 10^{-8} at 973 K.
K_{p} = K_{c} (RT)^{\(\Delta{n}\)}, since Temperature is already converted to Kelvin and R = 0.08206 \(\dfrac{Liter \; Atm}{Mole \; Kelvin}\)
We need to find Delta n: K_{p} = \(\dfrac{[H_{_}{2}]^{4}[CS_{2}]}{[H_{2}S]^{2}[CH_{4}O]}\)
\(\Delta{n}\) = (total number of moles of products) - (total number of moles in reactants)
\(\Delta{n}\) = (5) - (3) = 2
We can plug in our numbers: K_{p} = (5.27 * 10^{-8})[(0.08206)(973)]^{2}
K_{p} = 3.6 * 10^{-4}
3. The two common chlorides of Phosphorus, PCl_{3} and PCl_{5}, both important in the production of other phosphorous compounds, coexist in equilibrium through: (number 17 from p. 655 in the textbook)
PCl_{3} (g) + Cl_{2} (g) \(\rightleftharpoons\) PCl_{5} (g)
At 250 ^{\(\circ\)}C, an equilibrium mixture in a 2.50 L flask contains 0.105 g PCl_{5}, 0.220 g PCl_{3}, and 2.12 g Cl_{2}. What are the values of:
(a) K_{c}
[We need to convert grams to Molarity (mol/L), so we multiply grams with the molar mass and divide by Liters.]
PCl_{5} = \(\dfrac{0.105 g}{2.50 L}\) \(* \dfrac{1 mol}{137.3 g}\) (Molar Mass) = 2.0173 * 10^{-4} M
PCl_{3} = \(\dfrac{0.220 g}{2.50 L}\) \(* \dfrac{1 mol}{137.3 g}\) (Molar Mass) = 6.4093 * 10^{-4} M
Cl_{2} = \(\dfrac{2.12 g}{2.50 L}\) \(* \dfrac{1 mol}{70.9 g}\) (Molar Mass) = 0.0119605
\( K_{c} = \dfrac{[PCl_{5}]}{[Cl_{2}][PCl_{3}]}\)
\( K_{c} = \dfrac{[2.0173 * 10^{-4}]}{[0.0119605][6.4093 * 10^{-4}]}\)
K_{c} = 26.32
(b) K_{p}
K_{p} = K_{c} (RT)^{\(\Delta{n}\)}
We need to find: \(\Delta{n}\) and K, R = 0.08206 \(\dfrac{L atm}{mol K}\)
K = 250 ^{\(\circ\)}C + 273 = 523 K
\(\Delta{n}\) = (1) - (2) = -1
K_{p} = (26.32) [(0.08206 )(523)]^{(-1)}
K_{p} = 0.6133
Contributors
- Rubi Medrano, Sharon Wei (UCD)