Skip to main content
Chemistry LibreTexts

15.3: Units of Radioactivity

[ "article:topic", "Becquerel", "Geiger counter", "radioactivity units", "showtoc:no", "license:ccbyncsa" ]
  • Page ID
    64103
  • Learning Objective

    • Express amounts of radioactivity in a variety of units.

    In Section 15.3 - Half Life, we used mass to indicate the amount of radioactive substance present. This is only one of several units used to express amounts of radiation. Some units describe the number of radioactive events occurring per unit time, while others express the amount of a person’s exposure to radiation.

    Perhaps the direct way of reporting radioactivity is the number of radioactive decays per second. One decay per second is called one becquerel (Bq). Even in a small mass of radioactive material, however, there are thousands upon thousands of decays or disintegrations per second. The unit curie (Ci), now defined as 3.7 × 1010 decays/s, was originally defined as the number of decays per second in 1 g of radium. Many radioactive samples have activities that are on the order of microcuries (µCi) or more. Both the becquerel and the curie can be used in place of grams to describe quantities of radioactive material. As an example, the amount of americium in an average smoke detector has an activity of 0.9 µCi. (The curie is named after Polish scientist Marie Curie, who performed some of the initial investigations into radioactive phenomena in the early 1900s; the becquerel is named after Henri Becquerel, who discovered radioactivity in 1896.)

    Example \(\PageIndex{1}\):

    A sample of radium has an activity of 16.0 mCi (millicuries). If the half-life of radium is 1,600 y, how long before the sample’s activity is 1.0 mCi?

    Solution

    The following table shows the activity of the radium sample over multiple half-lives:

    Time in Years Activity
    0 16.0 mCi
    1,600 8.0 mCi
    3,200 4.0 mCi
    4,800 2.0 mCi
    6,400 1.0 mCi

    Over a period of 4 half-lives, the activity of the radium will be halved four times, at which point its activity will be 1.0 mCi. Thus it takes 4 half-lives, or 4 × 1,600 y = 6,400 y, for the activity to decrease to 1.0 mCi.

    Exercise \(\PageIndex{1}\)

    A sample of radon has an activity of 60,000 Bq. If the half-life of radon is 15 h, how long before the sample’s activity is 3,750 Bq?

    Answer

    60 h

    Example \(\PageIndex{2}\):

    A sample of radium has an activity of 16.0 mCi. If the half-life of radium is 1,600 y, how long before the sample’s activity is 5.6 mCi?

    Solution

    In this case we do not have an exact number of half-lives, so we need to use the more complicated equation ( Section 15.3 - Half Life) and solve for time. If the initial amount is represented by 16.0 mCi and the final amount is 5.6 mCi, we have5.6 mCi = (16.0 mCi)e−0.693t/(1,600 y)

    To solve, we divide both sides of the equation by 16.0 mCi to cancel the millicurie units:

    \[\frac{5.6}{16.0}= e^{-0.693t/(1,600y)}\]

    By taking the natural logarithm of both sides; the natural logarithm cancels the exponential function. The natural logarithm of 5.6/16.0 is −1.050. So

    −1.050 = −0.692t/(1,600 y)

    The negative sign cancels, and we solve for t. Thus

    t = 2,420 y

    It makes sense that the time is greater than one half-life (1,600 y) because we have less than one-half of the original activity left.

    Exercise \(\PageIndex{2}\)

    A sample of radon has an activity of 60,000 Bq. If the half-life of radon is 15 h, how long before the sample’s activity is 10,000 Bq?

    Answer

    38.8 h

    Other measures of radioactivity are based on the effects it has on living tissue. Radioactivity can transfer energy to tissues in two ways: through the kinetic energy of the particles hitting the tissue and through the electromagnetic energy of the gamma rays being absorbed by the tissue. Either way, the transferred energy—like the thermal energy from boiling water—can damage the tissue.

    The rad (an acronym for radiation absorbed dose) is a unit equivalent to 1 g of tissue absorbing 0.01 J:1 rad = 0.01 J/g

    Another unit of radiation absorption is the gray (Gy):

    1 Gy = 100 rad

    The rad is more common. To get an idea of the amount of energy this represents, consider that the absorption of 1 rad by 70,000 g of water (approximately the same mass as a 150 lb person) would increase the temperature of the water by only 0.002°C. This may not seem like a lot, but it is enough energy to break about 1 × 1021 molecular C–C bonds in a person’s body. That amount of damage would not be desirable.

    Predicting the effects of radiation is complicated by the fact that different types of emissions affect various tissues differently. To quantify these effects, the unit rem (an acronym for röntgen equivalent man) is defined asrem = rad × factor

    where factor is a number greater than or equal to 1 that takes into account the type of radioactive emission and sometimes the type of tissue being exposed. For beta particles, the factor equals 1. For alpha particles striking most tissues, the factor is 10, but for eye tissue the factor is 30. Most radioactive emissions that people are exposed to are on the order of a few dozen millirems (mrem) or less; a medical X-ray is about 20 mrem. A sievert (Sv) is a related unit and is defined as 100 rem.

    What is a person’s annual exposure to radioactivity and radiation? Table 15.4.1, lists the sources and annual amounts of radiation exposure. It may surprise you to learn that fully 82% of the radioactivity and radiation exposure we receive is from natural sources—sources we cannot avoid. Fully 10% of the exposure comes from our own bodies—largely from carbon-14 and potassium-40.

    Table 15.4.1: Average Annual Radiation Exposure (Approximate)
    Source Amount (mrem)
    radon gas 200
    medical sources 53
    radioactive atoms in the body naturally 39
    terrestrial sources 28
    cosmic sources 28*
    consumer products 10
    nuclear energy 0.05
    Total 358
    *Flying from New York City to San Francisco adds 5 mrem to your overall radiation exposure because the plane flies above much of the atmosphere, which protects us from cosmic radiation.

    The actual effects of radioactivity and radiation exposure on a person’s health depend on the type of radioactivity, the length of exposure, and the tissues exposed. Table 15.4.2 - Effects of Short-Term Exposure to Radioactivity and Radiation, lists the potential threats to health at various amounts of exposure over short periods of time (hours or days).

     Table 15.4.2: Effects of Short-Term Exposure to Radioactivity and Radiation
    Exposure (rem) Effect
    1 (over a full year) no detectable effect
    ∼20 increased risk of some cancers
    ∼100 damage to bone marrow and other tissues; possible internal bleeding; decrease in white blood cell count
    200–300 visible “burns” in skin, nausea, vomiting, fatigue
    >300 loss of white blood cells; hair loss
    ∼600 death

    One of the simplest ways of detecting radioactivity is by using a piece of photographic film embedded in a badge or a pen. On a regular basis, the film is developed and checked for exposure. Comparing the exposure level of the film with a set of standard exposures indicates the amount of radiation a person was exposed to.

    Another means of detecting radioactivity is an electrical device called a Geiger counter (Fig. 15.4.1). It contains a gas-filled chamber with a thin membrane on one end that allows radiation emitted from radioactive nuclei to enter the chamber and knock electrons off atoms of gas (usually argon). The presence of electrons and positively charged ions causes a small current, which is detected by the Geiger counter and converted to a signal on a meter or, commonly, an audio circuit to produce an audible “click.”

    Fig. 15.4.1 Detecting Radioactivity © Thinkstock. A Geiger counter is a common instrument used to detect radioactivity.

    Key Takeaway

    • Radioactivity can be expressed in a variety of units, including rems, rads, and curies.