Lab 1: Volume and Mass
Chemistry is the study of matter. Matter has mass and takes up space, so measuring mass and volumes is something we do all the time in chemistry. This lab introduces balances (to measure mass) and lab glassware (to handle and measure the volume of liquids). At the end of the lab, we hope you can answer questions such as:
- How do I use a balance?
- What are the items in my drawer called, and what are they used for?
- How can I mix a liquid, and why would I?
- How do we measure small volumes (less than a teaspoon)?
- When would I use a graduated cylinder, and when would I use a buret instead?
Safety and hazardous waste
This lab has no specific safety concerns. The substances used are water and food coloring. We are not generating any hazardous waste today. However, for EVERY experiment we conduct in the chemistry lab, there are general safety concerns to be aware of, including tripping hazards and broken glass. Whenever you or anyone in the chemistry lab is conducting an experiment, you must wear your safety goggles and other required Personal Protection Equipment (PPE) to protect yourself.
Organization
Use your lab notebook to record measurements and observations, and to show your work for calculations. There is a summary sheet you will hand in. This lab has 4 parts that can be done in any order. For part 1, you will receive a time slot to avoid waiting time at the analytical balances (we have four, and there are up to 18 students in the lab). Part 3 uses a buret which is not part of your drawer equipment. You will work individually on parts 1 and 2, and in pairs on parts 3 and 4.
Average and standard deviation
For some tasks, you are asked to calculate and average (also called mean) and a standard deviation of repeated measurements. While you can quickly calculate an average by hand, it takes a bit longer to write out the calculation for standard deviation. To quickly calculate standard deviation, you may either use a spreadsheet (Excel or Google Sheets) OR you can also use an online calculator such as the one linked in the QR code.
![clipboard_e72f0bdb0c6ac9211bfb8974dcf5ea0c8.png](https://chem.libretexts.org/@api/deki/files/438076/clipboard_e72f0bdb0c6ac9211bfb8974dcf5ea0c8.png?revision=1)
Part 1: Using an analytical balance
An analytical balance is pretty amazing. It can measure masses down to a milligram, i.e. 0.001 g. To get the full power of the analytical balance, you have to learn how to use it and to take good care of it.
1a) Precision: mass of a penny
The mass (m) of a penny is easy to measure. Set the balance to zero while all doors are closed. Open one of the doors, place the penny in the middle of the weighing pan, close the doors, and read off the mass once it has stabilized. There might be some fluctuations in the last digit even after waiting quite some time. The mass shown will be in grams (g). Test the balance for consistency by measuring your penny on two other balances. Record all measurements in your notebook. Then calculate average and standard deviation of your three measurements of the penny. In your summary sheet, record this as "m = (average +/- standard deviation) g."
1b) Mass of a powdered solid
To measure a powdered solid, you have to use weighing paper, a weighing dish or some other container. Your sample has a mass (“net”) and your container has a mass (“tare”), but the balance records the sum (“gross”). To get the net mass of your sample, either measure the mass of the empty container and write it down, or press the zero button while the empty container is on the balance (“taring the balance”). For the latter, you have to be sure than you can complete the measurement before someone else uses the balance.
When you use a weighing paper, it is good practice to make a crease in it before use. This makes it easier to transfer the sample off the paper later. Measure the mass of a “spatula tip” of baking soda using weighing paper and record it. Then, tare the balance with a fresh weighing paper, transfer the baking soda onto the fresh weighing paper, measure the mass and record it. How much do the two measurements of the powder differ? Why might they be slightly off?
1c) Mass of a liquid
The maximal mass for an analytical balance is often 110 g. Make sure the container you choose for measuring the mass of a liquid is not too heavy for the balance. In this experiment, we will test how consistent the mass of 10 mL in a graduated cylinder is, and how close to the expected mass (at room temperature, the mass of 10 mL of distilled water is about 9.9820 grams). Measure the mass of a dry empty 10 mL graduated cylinder. Then, fill it to 10 mL, measure the gross mass, calculate the net mass and record it. Remove some water with a transfer pipette, fill to 10 mL again, and record the mass. Record a third mass the same way. Then, calculate the average and the standard deviation. Compare your result with the claim on the graduate cylinder. The easiest way to do that is the convert the average mass and the standard deviation into volumes by dividing by the density of 0.99820 g/mL.
1d) Cleaning the balance
Before moving on to the next part, check the weighing pan, the bottom of the balance and the surrounding of the balance whether there is any powder or liquid you spilled. It is important that you clean up after using the balance because you are the one that knows which substances you used. If there is a major spill, inform your instructor.
Part 2: Drops as volume measurement
There are expensive instruments to dispense or measure tiny volumes, such as a Hamilton syringe, an adjustable micropipette, or the head of an inkjet printer. The cheapest way to dispense a small volume is to count drops (like you would do for eye drops, for example). Here, we will estimate the volume of drops made in different ways, and explore how consistent they are.
2a) Volume of a drop of water
Fill a 10 mL graduated cylinder to the 6 mL mark with water. Then, using three different ways to make drops (transfer pipette, glass dropper, beaker), count how many drops it takes to add 1 mL. Then, calculate the average drop size in µL (1 mL = 1000 µL) and record it on the summary sheet.
2b) How consistent are drops?
To explore how consistent the drop volumes are, you will make a green solution from a yellow and a blue solution. In the first recipe, take two drops of yellow and one drop of blue, dilute to 5 mL with water, mix and transfer to a medium test tube. Do this in triplicate. Now, take ten drops of yellow and five drops of blue, dilute to 25 mL with water, mix, and transfer some of it to a medium test tube to the same height as the 5 mL samples for good visual comparison (discarding the remainder). Do this in triplicate as well. Compare the color of the solutions. How much variation is there within the triplicates, and between the two different recipes? Look around for another set of green solution, and compare yours with theirs.
Part 3: Volumetric glassware
For this part, you will work in pairs, but write your own words into the summary sheet.
We use volumetric glassware such as graduated cylinders and burets to measure the volume of liquids. There are other glass containers in your drawer (beaker, Erlenmeyer flask, filter flask) that are not designed to measure volume.
We will use a buret today as our most accurate and precise way of measuring volumes. We will practice to read volumes to 0.01 mL, so please always quote measurements to two decimal places, i.e. if the liquid level is exactly at the 1 mL line, you record this value as 1.00 mL. Note that the scale goes from 0.00 mL at the top (filled) to 50.00 mL at the bottom (empty). If you are outside of this range before or after dispensing, you do not know how much you dispensed. For instructions how to read off the buret, watch this 4-minute video.
![](https://i.stack.imgur.com/WxWras.png)
We can figure out how much liquid we dispensed with a buret by writing down the liquid level before and after dispensing, and taking the difference. For example, if the liquid level was at 0.15 mL before dispensing and at 36.72 mL after, you dispensed V = 36.72 mL - 0.15 mL = 36.57 mL.
\(\ \ \ V_{\mathrm{before}}= 0.15\ \mathrm{mL}\)
\(\ \ \ V_{\mathrm{after}}= 36.72\ \mathrm{mL}\)
\(\ \ \ V_{\mathrm{dispensed}}= V_{\mathrm{after}} - V_{\mathrm{before}} =36.57\ \mathrm{mL}\)
→ explore live on PQcalc
Before you can start, you have to set up the buret and fill it with water so that the water level is in between the 0 mL and the 1 mL mark and there is no air in the spout. Ask your instructor to check the setup before you start.
3a) Accuracy and precision of measuring 10 mL
We will compare and contrast two graduated cylinder sizes (10 mL and 100 mL) as well as a 50 mL beaker to explore which is best to measure 10 mL of water. Starting with a dry empty container and a buret with known starting volume, dispense water from the buret into the container to the 10 mL line. As you get closer to the line, you should adjust the dispensing speed to a slow drip. Once you reached the line, read off the buret, calculate the dispensed volume and record it in your notebook. For each item of glassware, do this in triplicate and calculate the average and the standard deviation. With your partner, you can do two measurements before you have to empty and dry your containers for the third measurement. Copy your results into the lab summary sheet.
3b) To deliver or to contain
For the set of experiments above, you used the buret “to deliver” and the graduate cylinder “to contain”, the way it is intended. Measurements “to contain” are useful in making a solution or reaction mixture where the final volume in the container is critical. Measurements “to deliver” are useful in titrations, where you add solution until you observe a color change or other “endpoint”, and you need to know how much you added. We will encounter burets again in future labs.
Just to experience using the buret and the graduate cylinder in the unintended way, take a graduated cylinder filled with 10 mL water and try to deliver the liquid to the buret, recording the beginning and the final volume. Make sure your first buret reading is larger than 10 mL, otherwise you will overfill the buret. How much water did you add to the buret according to the two readings? Is it more or is it less than you expected? What are the problems you encounter trying this?
Part 4: Mixing liquids and dissolving solids
For this part, you will work in pairs, but write your own words into the summary sheet.
How will samples mix depends on their scale. In a small volume of a liquid (such as the cytosol of a bacterial cell), everything mixes rapidly because of diffusion, i.e. particles moving all the time. The larger the volume, the more effort you have to put into mixing if you want a homogenous mixture (a solution). Quoting from Wikipedia, “modern industrial processing almost always involves some form of mixing”. We will explore mixing of liquid volumes typically used in the GenChem lab.
4a) Order of addition
Take two beakers of the same size, one from each of your drawers. In the first beaker, fill to the highest line with water and then add one drop of red solution. To the second beaker, add one drop of read solution and then fill to the highest line with water. Observe them for 20 seconds and describe the difference.
4b) Mixing by swirling
Fill a beaker, an Erlenmeyer flask and a graduated cylinder with water. Then, add a drop of red solution to each. Try to mix each by swirling. Compare your results, in terms of efficiency of mixing and in terms of splashes, if any.
4c) Mixing with a stir bar, a stirring rod or inverting
Repeat the setup from 4b) but without swirling. Use a stirring rod to stir the contents of the beaker. Use a magnetic stir bar and a magnetic stirrer for the Erlenmeyer flask. Use parafilm to cover the top of the graduated cylinder and invert to mix. Which of the methods did you like the best? Which do you think resulted in the largest loss of solution (clinging to the stir bar, to the stirring rod, or to the parafilm)?
4d) Dissolving some salt (thought experiment)
Using what you just learned, make a plan to dissolve a tablespoon of salt in water, giving a total volume of 50 mL. Which container would you use to dissolve the salt in water? How would you mix it? Which container would you use to make the solution up to 50 mL with water? How would you minimize losses of transfer?
Cleanup
Before you clean up, show your summary sheet to your instructor to get an exit stamp on it. Once you received permission to wrap things up, empty your buret (no need to rinse because it held water only) and clamp it in an inverted orientation to dry. Rinse the containers you used, let them drip off at your bench and put them back into your drawer. Double check that the balance(s) you used are clean and if not, clean them. Take your lab notebook with you if you'll need to prepare it before next week's experiment. Wipe off your bench area and hand in your summary sheet before you leave.