Skip to main content
Chemistry LibreTexts

Chapter 12.6: The Chemistry of Acid Rain

  • Page ID
  • Edited Logo.png

    Prince George's Community College
    General Chemistry for Engineering
    CHM 2000

    Unit I: Atoms      Unit II: Molecules     Unit III: States of Matter     Unit IV: Reactions     Unit V: Kinetics & Equilibrium
    Unit VI: Thermo & Electrochemistry
         Unit VII: Nuclear Chemistry

    Learning Objective

    • To understand the chemistry of acid rain.

    Acid–base reactions can have a strong environmental impact. For example, a dramatic increase in the acidity of rain and snow over the past 150 years is dissolving marble and limestone surfaces, accelerating the corrosion of metal objects, and decreasing the pH of natural waters. This environmental problem is called acid rain which is dramatically more acidic because of human activities. and has significant consequences for all living organisms. To understand acid rain requires an understanding of acid–base reactions in aqueous solution.

    The term acid rain is actually somewhat misleading because even pure rainwater collected in areas remote from civilization is slightly acidic (pH ≈ 5.6) due to dissolved carbon dioxide, which reacts with water to give carbonic acid, a weak acid:

    \( C{O_2}\left( g \right) + {H_2}O\left( l \right){\text{ }} \rightleftharpoons {\text{ }}{H_2}C{O_3}\left( {aq} \right){\text{ }} \rightleftharpoons {\text{ }}{H^ + }\left( {aq} \right) + HC{O_3}^ - \left( {aq} \right) \tag{12.6.1} \)

    The English chemist Robert Angus Smith is generally credited with coining the phrase acid rain in 1872 to describe the increased acidity of the rain in British industrial centers (such as Manchester), which was apparently caused by the unbridled excesses of the early Industrial Revolution, although the connection was not yet understood. At that time, there was no good way to measure hydrogen ion concentrations, so it is difficult to know the actual pH of the rain observed by Smith. Typical pH values for rain in the continental United States now range from 4 to 4.5, with values as low as 2.0 reported for areas such as Los Angeles. Recall from Figure 12.6.1 that rain with a pH of 2 is comparable in acidity to lemon juice, and even “normal” rain is now as acidic as tomato juice or black coffee.

    What is the source of the increased acidity in rain and snow? Chemical analysis shows the presence of large quantities of sulfate (SO42−) and nitrate (NO3) ions, and a wide variety of evidence indicates that a significant fraction of these species come from nitrogen and sulfur oxides produced during the combustion of fossil fuels. At the high temperatures found in both internal combustion engines and lightning discharges, molecular nitrogen and molecular oxygen react to give nitric oxide:

    \( {N_2}\left( g \right) + {O_2}\left( g \right){\text{ }} \to {\text{ }}2NO\left( g \right)\ \tag{12.6.2} \)

    Nitric oxide then reacts rapidly with excess oxygen to give nitrogen dioxide, the compound responsible for the brown color of smog:

    \( 2NO\left( g \right) + {O_2}\left( g \right){\text{ }} \to {\text{ }}2N{O_2}\left( g \right) \tag{12.6.3}) \)

    When nitrogen dioxide dissolves in water, it forms a 1:1 mixture of nitrous acid and nitric acid:

    \( 2N{O_2}\left( g \right) + {H_2}O\left( l \right){\text{ }} \to {\text{ }}HN{O_2}\left( {aq} \right) + HN{O_3}\left( {aq} \right)\tag{12.6.4} \)

    Because molecular oxygen eventually oxidizes nitrous acid to nitric acid, the overall reaction is

    \( 2{N_2}\left( g \right) + 5{O_2}\left( g \right) + 2{H_2}O\left( l \right){\rm{ }} \to 4HN{O_3}(aq) \tag{12.6.5} \)

    Large amounts of sulfur dioxide have always been released into the atmosphere by natural sources, such as volcanoes, forest fires, and the microbial decay of organic materials, but for most of Earth’s recorded history the natural cycling of sulfur from the atmosphere into oceans and rocks kept the acidity of rain and snow in check. Unfortunately, the burning of fossil fuels seems to have tipped the balance. Many coals contain as much as 5%–6% pyrite (FeS2) by mass, and fuel oils typically contain at least 0.5% sulfur by mass. Since the mid-19th century, these fuels have been burned on a huge scale to supply the energy needs of our modern industrial society, releasing tens of millions of tons of additional SO2 into the atmosphere annually. In addition, roasting sulfide ores to obtain metals such as zinc and copper produces large amounts of SO2 via reactions such as

    \( 2ZnS\left( s \right) + 3{O_2}\left( g \right){\rm{ }} \to 2ZnO\left( s \right) + 2S{O_2}\left( g \right) \tag{12.6.6} \)

    Regardless of the source, the SO2 dissolves in rainwater to give sulfurous acid (Equation 12.6.7), which is eventually oxidized by oxygen to sulfuric acid (Equation 12.6.8):

    \[S{O_2}\left( g \right) + {H_2}O\left( l \right){\rm{ }} \to {H_2}S{O_3}(aq) \tag{12.6.7} \]

    \[2{H_2}S{O_3}(aq) + {O_2}\left( g \right){\rm{ }} \to 2{H_2}S{O_4}(aq) \tag{12.6.8} \]​

    Concerns about the harmful effects of acid rain have led to strong pressure on industry to minimize the release of SO2 and NO. For example, coal-burning power plants now use SO2 “scrubbers,” which trap SO2 by its reaction with lime (CaO) to produce calcium sulfite dihydrate (CaSO3·2H2O; Figure 12.6.1).


    Figure 12.6.1 Schematic Diagram of a Wet Scrubber System In coal-burning power plants, SO2 can be removed (“scrubbed”) from exhaust gases by its reaction with a lime (CaO) and water spray to produce calcium sulfite dihydrate (CaSO3·2H2O). Removing SO2 from the gases prevents its conversion to SO3 and subsequent reaction with rainwater (acid rain). Scrubbing systems are now commonly used to minimize the environmental effects of large-scale fossil fuel combustion.

    The damage that acid rain does to limestone and marble buildings and sculptures is due to a classic acid–base reaction. Marble and limestone both consist of calcium carbonate (CaCO3), a salt derived from the weak acid H2CO3. As we saw in Section 12.5 the reaction of a strong acid with a salt of a weak acid goes to completion. Thus we can write the reaction of limestone or marble with dilute sulfuric acid as follows:

    \[CaC{O_3}\left( s \right) + {H_2}S{O_4}(aq){\rm{ }} \to CaS{O_4}\left( s \right) + {H_2}O\left( l \right) + C{O_2}\left( g \right)\tag{12.6.9}\]

    Because CaSO4 is sparingly soluble in water, the net result of this reaction is to dissolve the marble or limestone. The Lincoln Memorial in Washington, DC, which was built in 1922, already shows significant damage from acid rain, and many older objects are exhibiting even greater damage (Figure 12.6.2 ). Metal objects can also suffer damage from acid rain through oxidation–reduction reactions, which are discussed in Section 12.7 .


    Figure 12.6.2 Acid Rain Damage to a Statue of George Washington Both marble and limestone consist of CaCO3, which reacts with acid rain in an acid–base reaction to produce CaSO4. Because CaSO4 is somewhat soluble in water, significant damage to the structure can result.

    The biological effects of acid rain are more complex. As indicated in Figure 8.6.2, biological fluids, such as blood, have a pH of 7–8. Organisms such as fish can maintain their internal pH in water that has a pH in the range of 6.5–8.5. If the external pH is too low, however, many aquatic organisms can no longer maintain their internal pH, so they die. A pH of 4 or lower is fatal for virtually all fish, most invertebrate animals, and many microorganisms. At its worst as a result of acid rain, the pH of some lakes in Europe and the United States dropped below 4 and surveys suggested that up to 6% of the lakes in the Adirondack Mountains of upstate New York and 4% of the lakes in Sweden and Norway were essentially dead and contain no fish. Neither location contains large concentrations of industry, but New York lies downwind of the industrial Midwest, and Scandinavia is downwind of the most industrialized regions of western Europe. Both regions appear to have borne the brunt of the pollution produced by their upwind neighbors. This problem has been dealt with by regulations limiting emission of sulfur dioxide and nitrogen oxides from coal burning power plants and diesel trucks.

    A second major way in which acid rain can cause biological damage is less direct. Trees and many other plants are sensitive to the presence of aluminum and other metals in groundwater. Under normal circumstances, aluminum hydroxide [Al(OH)3], which is present in some soils, is insoluble. At lower pH values, however, Al(OH)3 dissolves via the following reaction:

    \[Al{\left( {OH} \right)_3}\left( s \right) + 3{H^ + }(aq){\rm{ }} \to A{l^3}^ + (aq) + 3{H_2}O\left( l \right)\tag{12.6.10}\]

    The result is increased levels of Al3+ ions in groundwater. Because the Al3+ ion is toxic to plants, high concentrations can affect plant growth. Acid rain can also weaken the leaves and roots of plants so much that the plants are unable to withstand other stresses. The combination of the two effects caused significant damage to established forests, such as the Black Forest in Germany and the forests of the northeastern United States and Canada and other countries (Figure 12.6.3 ).


    Figure 12.6.3 Acid Rain Damage to a Forest in the Czech RepublicTrees and many other plants are sensitive to aluminum and other metals in groundwater. Acid rain increases the concentration of Al3+ in groundwater, thereby adversely affecting plant growth. Large sections of established forests have been severely damaged.


    Acid rain is rainfall whose pH is less than 5.6, the value typically observed, due to the presence of dissolved carbon dioxide. Acid rain is caused by nitrogen oxides and sulfur dioxide produced by both natural processes and the combustion of fossil fuels. Eventually, these oxides react with oxygen and water to give nitric acid and sulfuric acid.

    Key Takeaway

    • The damaging effects of acid rain have led to strong pressure on industry to minimize the release of harmful reactants.

    Conceptual Problems

    1. Why is it recommended that marble countertops not be used in kitchens? Marble is composed mostly of CaCO3.

    2. Explain why desulfurization of fossil fuels is an area of intense research.

    3. What is the role of NOx in the formation of acid rain?


      • Anonymous
    • Modified by Joshua Halpern, Scott Sinex and Scott Johnson

    • Was this article helpful?