Chapter 19.4: Electrochemical Cells and Thermodynamics
 Page ID
 28653
Learning Objectives
 To understand the relationship between cell potential and the equilibrium constant.
 To use cell potentials to calculate solution concentrations.
Changes in reaction conditions can have a tremendous effect on the course of a redox reaction. For example, under standard conditions, the reaction of Co(s) with Ni^{2+}(aq) to form Ni(s) and Co^{2+}(aq) occurs spontaneously, but if we reduce the concentration of Ni^{2+} by a factor of 100, so that [Ni^{2+}] is 0.01 M, then the reverse reaction occurs spontaneously instead. The relationship between voltage and concentration is one of the factors that must be understood to predict whether a reaction will be spontaneous.
The Relationship between Cell Potential and Free Energy
Electrochemical cells convert chemical energy to electrical energy and vice versa. The total amount of energy produced by an electrochemical cell, and thus the amount of energy available to do electrical work, depends on both the cell potential and the total number of electrons that are transferred from the reductant to the oxidant during the course of a reaction. The resulting electric current is measured in coulombs (C)The SI unit of measure for the number of electrons that pass a given point in 1 second; it is defined as 6.25×10^{18} e^{−}/s and relates electron potential (in volts) to energy (in joules): 1 J/1 V = 1 C., an SI unit that measures the number of electrons passing a given point in 1 s. A coulomb relates energy (in joules) to electrical potential (in volts). Electric current is measured in amperes (A)The fundamental SI unit of electric current; it is defined as the flow of 1 C/s past a given point: 1A = 1 C/s.; 1 A is defined as the flow of 1 C/s past a given point (1 C = 1 A·s):
\( \dfrac{1\;J}{1\;V}= 1\;C=1\;A\cdot s \tag{19.4.1}\)
In chemical reactions, however, we need to relate the coulomb to the charge on a mole of electrons. Multiplying the charge on the electron by Avogadro’s number gives us the charge on 1 mol of electrons, which is called the faraday (F)The charge on 1 mol of electrons; it is obtained by multiplying the charge on the electron by Avogadro’s number., named after the English physicist and chemist Michael Faraday (1791–1867):
\( F= \left ( 1.60218 \times 10^{19}\;C \right )\dfrac{6.02214\times 10^{23}}{1\;mole} \tag{19.4.2} \)
\( F= 9.64855 \times 10^{4}\;C/mole \simeq 96,486 C/\left (mol \; e^{} \right ) \)
The total charge transferred from the reductant to the oxidant is therefore nF, where n is the number of moles of electrons.
Michael Faraday (1791–1867)
Faraday was a British physicist and chemist who was arguably one of the greatest experimental scientists in history. The son of a blacksmith, Faraday was selfeducated and became an apprentice bookbinder at age 14 before turning to science. His experiments in electricity and magnetism made electricity a routine tool in science and led to both the electric motor and the electric generator. He discovered the phenomenon of electrolysis and laid the foundations of electrochemistry. In fact, most of the specialized terms introduced in this chapter (electrode, anode, cathode, and so forth) are due to Faraday. In addition, he discovered benzene and invented the system of oxidation state numbers that we use today. Faraday is probably best known for “The Chemical History of a Candle,” a series of public lectures on the chemistry and physics of flames.
The maximum amount of work that can be produced by an electrochemical cell (w_{max}) is equal to the product of the cell potential (E_{cell}) and the total charge transferred during the reaction (nF):
\( w_{max} = nFE_{cell} \tag{19.4.3}\)
Work is expressed as a negative number because work is being done by a system (an electrochemical cell with a positive potential) on its surroundings.
As you learned in Chapter 18, the change in free energy (ΔG) is also a measure of the maximum amount of work that can be performed during a chemical process (ΔG = w_{max}). Consequently, there must be a relationship between the potential of an electrochemical cell and ΔG, the most important thermodynamic quantity discussed in Chapter 18. This relationship is as follows:
\( \Delta G = nFE_{cell} \tag{19.4.4}\)
A spontaneous redox reaction is therefore characterized by a negative value of ΔG and a positive value of E_{cell}, consistent with our earlier discussions. When both reactants and products are in their standard states, the relationship between ΔG° and E°_{cell} is as follows:
\( \Delta G^{o} = nFE^{o}_{cell} \tag{19.4.5}\)
Note the Pattern
A spontaneous redox reaction is characterized by a negative value of ΔG°, which corresponds to a positive value of E°_{cell}.
Example 19.4.1
Suppose you want to prepare elemental bromine from bromide using the dichromate ion as an oxidant. Using the data in Table 19.3.1, calculate the freeenergy change (ΔG°) for this redox reaction under standard conditions. Is the reaction spontaneous?
Given: redox reaction
Asked for: ΔG° for the reaction and spontaneity
Strategy:
A From the relevant halfreactions and the corresponding values of E°, write the overall reaction and calculate E°_{cell} using Equation 19.2.2.
B Determine the number of electrons transferred in the overall reaction. Then use Equation 19.4.5 to calculate ΔG°. If ΔG° is negative, then the reaction is spontaneous.
Solution:
A As always, the first step is to write the relevant halfreactions and use them to obtain the overall reaction and the magnitude of E°. From Table 19.3.1, we can find the reduction and oxidation halfreactions and corresponding E° values:
\( \begin{matrix}cathode: & Cr_{2}O_{7}^{2} \left (aq \right )+ 14 H^{+}\left (aq \right ) + 6e^{}\rightarrow 2Cr^{3+}\left (aq \right ) + 7H_{2}O \left (l \right ) & E_{cathode}^{o}=1.23\;V \\
anode: & 2Br^{}\left (aq \right ) \rightarrow Br_{2}\left (aq \right )+2e^{} & E_{anode}^{o}=1.09\;V
\end{matrix} \)
To obtain the overall balanced chemical equation, we must multiply both sides of the oxidation halfreaction by 3 to obtain the same number of electrons as in the reduction halfreaction, remembering that the magnitude of E° is not affected:
\( \begin{matrix}cathode: & Cr_{2}O_{7}^{2} \left (aq \right )+ 14 H^{+}\left (aq \right ) + 6e^{}\rightarrow 2Cr^{3+}\left (aq \right ) + 7H_{2}O \left (l \right ) & E_{cathode}^{o}=1.23\;V \\
anode: & 6Br^{}\left (aq \right ) \rightarrow 3Br_{2}\left (aq \right )+6e^{} & E_{anode}^{o}=1.09\;V \\
overall: & Cr_{2}O_{7}^{2} \left (aq \right )+ 14 H^{+}\left (aq \right ) + 6BrI^{} \rightarrow & E_{cell}^{o}=0.14\;V \\
& 2Cr^{3+}\left (aq \right ) + 7H_{2}O \left (l \right ) + 3Br_{2}\left (aq \right )&
\end{matrix} \)
B We can now calculate ΔG° using Equation 19.4.10 Because six electrons are transferred in the overall reaction, the value of n is 6:
\( \begin{matrix}\Delta G^{o} &= nFE_{cell}^{o} & =\left ( 6 \; \cancel{mol} \right )\left ( 96,468\;J/\left ( \cancel{V}\cdot \cancel{mol} \right ) \right )\left ( 0.14 \; \cancel{V} \right ) \\
& & 8.1\times 10^{4}\;J\\
& & 81 \; kJ/mol \; Cr_{2}O_{7}
\end{matrix} \)
Thus ΔG° is −81 kJ for the reaction as written, and the reaction is spontaneous.
Exercise
Use the data in Table 19.3.1 to calculate ΔG° for the reduction of ferric ion by iodide:
2Fe^{3+}(aq) + 2I^{−}(aq) → 2Fe^{2+}(aq) + I_{2}(s)Is the reaction spontaneous?
Answer: −44 kJ/mol I_{2}; yes
Potentials for the Sums of HalfReactions
Although Table 19.3.1 and Table P1 list several halfreactions, many more are known. When the standard potential for a halfreaction is not available, we can use relationships between standard potentials and free energy to obtain the potential of any other halfreaction that can be written as the sum of two or more halfreactions whose standard potentials are available. For example, the potential for the reduction of Fe^{3+}(aq) to Fe(s) is not listed in the table, but two related reductions are given:
\( Fe^{3+}\left ( aq \right ) + e^{} \rightarrow Fe^{2+}\left ( aq \right ) \;\;\; E^{o}=0.77\;V \tag{19.4.6}\)
\( Fe^{2+}\left ( aq \right ) + 2e^{} \rightarrow Fe\left ( aq \right ) \;\;\; E^{o}=0.45\;V \tag{19.4.7}\)
Although the sum of these two halfreactions gives the desired halfreaction, we cannot simply add the potentials of two reductive halfreactions to obtain the potential of a third reductive halfreaction because E° is not a state function. However, because ΔG° is a state function, the sum of the ΔG° values for the individual reactions gives us ΔG° for the overall reaction, which is proportional to both the potential and the number of electrons (n) transferred. To obtain the value of E° for the overall halfreaction, we first must add the values of ΔG° (= −nFE°) for each individual halfreaction to obtain ΔG° for the overall halfreaction:
\[ Fe^{3+}\left ( aq \right ) + e^{} \rightarrow \cancel{Fe^{2+}\left ( aq \right )} \;\;\; \Delta G^{o}=\left (1 \right )F \left (0.77\;V \right ) \tag{19.4.8}\]
\[ \cancel{Fe^{2+}\left ( aq \right )} + 2e^{} \rightarrow Fe\left ( s \right ) \;\;\; \Delta G^{o}= \left (2 \right )F \left (0.457\;V \right ) \notag{} \]
\[ Fe^{3+}\left ( aq \right ) + e^{} \rightarrow Fe\left ( s \right ) \;\;\; \Delta G^{o}=\left (1 \right )F \left (0.77\;V \right )+ \left (2 \right )F \left (0.457\;V \right ) \notag{} \]
Solving the last expression for ΔG° for the overall halfreaction,
\( \Delta G^{o}=F \left [\left (0.77\;V \right )+ \left (2 \right )\left (0.457\;V \right ) \right ] =F\left ( 0.13\;V \right ) \tag{19.4.9}\)
Three electrons (n = 3) are transferred in the overall reaction (Equation 19.4.15), so substituting into Equation 19.4.10 and solving for E° gives the following:
\( \Delta G^{o}=nFE_{cell}^{o} \)
\( F\left ( 0.13\;V \right )=3 F E_{cell}^{o}\)
\( E_{cell}^{o}=\dfrac{0.13\;V}{3}= 0.043\;V\)
This value of E° is very different from the value that is obtained by simply adding the potentials for the two halfreactions (0.32 V) and even has the opposite sign.
Note the Pattern
Values of E° for halfreactions cannot be added to give E° for the sum of the halfreactions; only values of ΔG° = −nFE°_{cell} for halfreactions can be added.
The Relationship between Cell Potential and the Equilibrium Constant
We can use the relationship between ΔG° and the equilibrium constant K, defined in Chapter 18, to obtain a relationship between E°_{cell} and K. Recall that for a general reaction of the type aA + bB → cC + dD, the standard freeenergy change and the equilibrium constant are related by the following equation:
\( \Delta G^{o}=RTln\;K \tag{19.4.10}\)
Given the relationship between the standard freeenergy change and the standard cell potential (Equation 19.4.9), we can write
\( nFE_{cell}^{o}=RTln\;K \tag{19.4.11}\)
Rearranging this equation,
\( E_{cell}^{o}=\left (\dfrac{RT}{nF} \right )ln\;K \tag{19.4.12}\)
For T = 298 K, Equation 19.4.12 can be simplified as follows:
\( E_{cell}^{o}=\left (\dfrac{RT}{nF} \right )ln\;K =\left [ \dfrac{8.314\;\cancel{J}/\left ( \cancel{mol}\cdot \cancel{K} \right )\left ( 298\;\cancel{K} \right )}{n\left [ 96,486\; \cancel{J}/\left ( V \cdot \cancel{mol} \right ) \right ]} \right ]2.303\;log \; K = \left ( \dfrac{0.0591}{n} \right )log\; K \tag{19.4.13} \)
Thus E°_{cell} is directly proportional to the logarithm of the equilibrium constant. This means that large equilibrium constants correspond to large positive values of E°_{cell} and vice versa.
Example 19.4.2
Use the data in Table 19.3.1 to calculate the equilibrium constant for the reaction of metallic lead with PbO_{2} in the presence of sulfate ions to give PbSO_{4} under standard conditions. (This reaction occurs when a car battery is discharged.) Report your answer to two significant figures.
Given: redox reaction
Asked for: K
Strategy:
A Write the relevant halfreactions and potentials. From these, obtain the overall reaction and E°_{cell}.
B Determine the number of electrons transferred in the overall reaction. Use Equation 19.4.13 to solve for log K and then K.
Solution:
A The relevant halfreactions and potentials from Table 19.3.1 are as follows:
\( \begin{matrix}
cathode: & PbO_{2} \left (s \right )+ SO_{4}^{2}\left (aq \right ) + 4H^{+}\left (aq \right )+ 2e^{}\rightarrow PbSO_{4}\left (s \right ) + 2H_{2}O \left (l \right ) & E_{cathode}^{o}= 1.69 \;V \\
anode: & Pb\left (s \right )+ SO_{4}^{2}\left (aq \right )\rightarrow PbSO_{4}\left (s \right )+2e^{} & E_{anode}^{o}=0.36 \;V \\
overall: & Pb\left (s \right )PbO_{2} \left (s \right )+ 2SO_{4}^{2}\left (aq \right ) + 4H^{+}\left (aq \right )\rightarrow 2PbSO_{4}\left (s \right )+ 2H_{2}O \left (l \right )& E_{cell}^{o}=2.05\;V
\end{matrix} \)
B Two electrons are transferred in the overall reaction, so n = 2. Solving Equation 19.4.13 for log K and inserting the values of n and E°,
\( ln\;K=\dfrac{nE^{o}}{0.0591\;V}=\dfrac{2\left ( 2.05\;\cancel{V} \right )}{0.0591\;\cancel{V}}=69.37 \)
\( K=2.3\times 10^{69} \)
Thus the equilibrium lies far to the right, favoring a discharged battery (as anyone who has ever tried unsuccessfully to start a car after letting it sit for a long time will know).
Exercise
Use the data in Table 19.3.1 to calculate the equilibrium constant for the reaction of Sn^{2+}(aq) with oxygen to produce Sn^{4+}(aq) and water under standard conditions. Report your answer to two significant figures. The reaction is as follows:
\( 2Sn^{2+}\left ( aq \right )+O_{2}\left ( g \right )+4H^{+}\left ( aq \right )\rightleftharpoons 2Sn^{4+}\left ( aq \right )+2H_{2}O\left ( l \right ) \)
Answer: 1.2 × 10^{73}
Figure 19.4.1 summarizes the relationships that we have developed based on properties of the system—that is, based on the equilibrium constant, standard freeenergy change, and standard cell potential—and the criteria for spontaneity (ΔG° < 0). Unfortunately, these criteria apply only to systems in which all reactants and products are present in their standard states, a situation that is seldom encountered in the real world. A more generally useful relationship between cell potential and reactant and product concentrations, as we are about to see, uses the relationship between ΔG and the reaction quotient Q developed in Chapter 18 .
Figure 19.4.1 The Relationships among Criteria for Thermodynamic SpontaneityThe three properties of a system that can be used to predict the spontaneity of a redox reaction under standard conditions are K, ΔG°, and E°_{cell}. If we know the value of one of these quantities, then these relationships enable us to calculate the value of the other two. The signs of ΔG° and E°_{cell} and the magnitude of K determine the direction of spontaneous reaction under standard conditions.
The Effect of Concentration on Cell Potential: The Nernst Equation
Recall from Chapter 18 that the actual freeenergy change for a reaction under nonstandard conditions, ΔG, is given as follows:
\( \Delta G =\Delta G^{o}+RT\;ln\;Q \tag{19.4.14}\)
We also know that ΔG = −nFE_{cell} and ΔG° = −nFE°_{cell}. Substituting these expressions into Equation 19.4.14, we obtain
\( nFE_{cell} =nFE_{cell}^{o}+RT\;ln\;Q \tag{19.4.15}\)
Dividing both sides of this equation by −nF,
\( E_{cell} =E_{cell}^{o}\dfrac{RT}{nF}\;ln\;Q \tag{19.4.16}\)
Equation 19.4.16 is called the Nernst equationAn equation for calculating cell potentials E_{cell} under nonstandard conditions; it can be used to determine the direction of spontaneous reaction for any redox reaction under an conditions:E_{cell}=</mo><msubsup><mi>E°−(RT/nF)lnQ, after the German physicist and chemist Walter Nernst (1864–1941), who first derived it. The Nernst equation is arguably the most important relationship in electrochemistry. When a redox reaction is at equilibrium (ΔG = 0), Equation 19.4.16 reduces to Equation 19.4.12 because Q = K, and there is no net transfer of electrons (i.e., E_{cell} = 0).
Substituting the values of the constants into Equation 19.4.16 with T = 298 K and converting to base10 logarithms give the relationship of the actual cell potential (E_{cell}), the standard cell potential (E°_{cell}), and the reactant and product concentrations at room temperature (contained in Q):
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{F}\;ln\;Q \tag{19.4.17}\)
Note the Pattern
The Nernst equation can be used to determine the value of E_{cell}, and thus the direction of spontaneous reaction, for any redox reaction under any conditions.
Equation 19.4.17 allows us to calculate the potential associated with any electrochemical cell at 298 K for any combination of reactant and product concentrations under any conditions. We can therefore determine the spontaneous direction of any redox reaction under any conditions, as long as we have tabulated values for the relevant standard electrode potentials. Notice in Equation 19.4.17 that the cell potential changes by 0.0591/n V for each 10fold change in the value of Q because log 10 = 1.
Example 19.4.3
In the exercise in Example 6, you determined that the following reaction proceeds spontaneously under standard conditions because E°_{cell} > 0 (which you now know means that ΔG° < 0):
\( 2Ce^{4+}\left ( aq \right )+2Cl^{}\left ( aq \right )\rightarrow 2Ce^{3+}\left ( aq \right )+ Cl_{2}\left ( g \right ) \)
Calculate E for this reaction under the following nonstandard conditions and determine whether it will occur spontaneously: [Ce^{4+}] = 0.013 M, [Ce^{3+}] = 0.60 M, [Cl^{−}] = 0.0030 M, Cl_{2}= 1.0 atm, and T = 25°C.
Given: balanced redox reaction, standard cell potential, and nonstandard conditions
Asked for: cell potential
Strategy:
Determine the number of electrons transferred during the redox process. Then use the Nernst equation to find the cell potential under the nonstandard conditions.
Solution:
We can use the information given and the Nernst equation to calculate E_{cell}. Moreover, because the temperature is 25°C (298 K), we can use Equation 19.4.17 instead of 19.46. The overall reaction involves the net transfer of two electrons:
2Ce^{4+}(aq) + 2e^{−} → 2Ce^{3+}(aq)
2Cl^{−}(aq) → Cl_{2}(g) + 2e^{−}
so n = 2. Substituting the concentrations given in the problem, the partial pressure of Cl_{2}, and the value of E°_{cell} into Equation 19.4.17,
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{F}\;log\;Q \)
\( \;\;\; =0.25\;V\dfrac{0.0591\;V}{2}\;logn\;\left (\dfrac{\left [ Ce^{3+} \right ]^{2}P_{Cl_{2}}}{\left [ Ce^{4+} \right ]^{2}\left [ Cl^{} \right ]^{2}} \right ) \)
\( \;\;\; =0.25\;V\left [ \left ( 0.0296\;V \right ) \left ( 8.37 \right )\right ]=0.00\;V \)
Thus the reaction will not occur spontaneously under these conditions (because E = 0 V and ΔG = 0). The composition specified is that of an equilibrium mixture.
Exercise
In the exercise in Example 6, you determined that molecular oxygen will not oxidize MnO_{2} to permanganate via the reaction
\( 4MnO_{2}\left ( s \right )+3O_{2}\left ( g \right )+4OH^{}\left ( aq \right ) \rightarrow 4MnO_{4}^{}\left ( aq \right )+ 2H_{2}O\left ( l \right ) \) \;\;\; E_{cell}^{o}=0.20\;V \)
Calculate E_{cell} for the reaction under the following nonstandard conditions and decide whether the reaction will occur spontaneously: pH 10, P(O_{2}) = 0.20 atm, [MNO_{4}^{−}] = 1.0 × 10^{−4} M, and T = 25°C.
Answer: E_{cell} = −0.22 V; the reaction will not occur spontaneously.
Applying the Nernst equation to a simple electrochemical cell such as the Zn/Cu cell discussed in Section 19.2 allows us to see how the cell voltage varies as the reaction progresses and the concentrations of the dissolved ions change. Recall that the overall reaction for this cell is as follows:
\( Zn\left ( s \right )+Cu^{2+}\left ( aq \right ) \rightarrow Zn^{2+}\left ( aq \right )+ Cu\left ( s \right ) \) \;\;\; E_{cell}^{o}=1.10\;V \tag{19.4.18}\)
The reaction quotient is therefore Q = [Zn^{2+}]/[Cu^{2+}]. Suppose that the cell initially contains 1.0 M Cu^{2+} and 1.0 × 10^{−6} M Zn^{2+}. The initial voltage measured when the cell is connected can then be calculated from Equation 19.4.17:
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{n}\;log \dfrac{\left [ Zn^{2+} \right ]}{\left [ Cu^{2+} \right ]} \tag{19.4.19} \)
\( E_{cell} =1.10\;V\dfrac{0.0591\;V}{2}\;log \dfrac{1.0\times 10^{6}}{1.0} = 1.28\;V \)
Thus the initial voltage is greater than E° because Q < 1. As the reaction proceeds, [Zn^{2+}] in the anode compartment increases as the zinc electrode dissolves, while [Cu^{2+}] in the cathode compartment decreases as metallic copper is deposited on the electrode. During this process, the ratio Q = [Zn^{2+}]/[Cu^{2+}] steadily increases, and the cell voltage therefore steadily decreases. Eventually, [Zn^{2+}] = [Cu^{2+}], so Q = 1 and E_{cell} = E°_{cell}. Beyond this point, [Zn^{2+}] will continue to increase in the anode compartment, and [Cu^{2+}] will continue to decrease in the cathode compartment. Thus the value of Q will increase further, leading to a further decrease in E_{cell}. When the concentrations in the two compartments are the opposite of the initial concentrations (i.e., 1.0 M Zn^{2+} and 1.0 × 10^{−6} M Cu^{2+}), Q = 1.0 × 10^{6}, and the cell potential will be reduced to 0.92 V.
The variation of E_{cell} with log Q over this range is linear with a slope of −0.0591/n, as illustrated in Figure 19.4.2. As the reaction proceeds still further, Q continues to increase, and E_{cell} continues to decrease. If neither of the electrodes dissolves completely, thereby breaking the electrical circuit, the cell voltage will eventually reach zero. This is the situation that occurs when a battery is “dead.” The value of Q when E_{cell} = 0 is calculated as follows:
\( E_{ cell} =E_{cell}^{o}  \dfrac{0.0591\;V}{n} \; log \; Q = 0 \tag{19.4.20} \)
\( E^{o}=\dfrac{0.0591\;V}{n}\;log \; Q \)
\( log \; Q )=\dfrac{E^{o} \; n}{0.0591\;V}=\dfrac{\left ( 1.10\;\cancel{V} \right )\left ( 2 \right )}{0.0591\;\cancel{V}}=37.23 \)
\( Q =10^{37.23}=1.7\times 10^{37} \)
Figure 19.4.2 The Variation of E_{cell} with Log Q for a Zn/Cu Cell Initially, log Q < 0, and the voltage of the cell is greater than E°_{cell}. As the reaction progresses, log Q increases, and E_{cell} decreases. When [Zn^{2+}] = [Cu^{2+}], log Q = 0 and E_{cell} = E°_{cell} = 1.10 V. As long as the electrical circuit remains intact, the reaction will continue, and log Q will increase until Q = K and the cell voltage reaches zero. At this point, the system will have reached equilibrium.
Recall that at equilibrium, Q = K. Thus the equilibrium constant for the reaction of Zn metal with Cu^{2+} to give Cu metal and Zn^{2+} is 1.7 × 10^{37} at 25°C.
Concentration Cells
A voltage can also be generated by constructing an electrochemical cell in which each compartment contains the same redox active solution but at different concentrations. The voltage is produced as the concentrations equilibrate. Suppose, for example, we have a cell with 0.010 M AgNO_{3} in one compartment and 1.0 M AgNO_{3} in the other. The cell diagram and corresponding halfreactions are as follows:
\( Ag\left ( s \right )\mid Ag^{+}\left ( aq,\; 0.010\; M \right )\parallel Ag^{+}\left ( aq,\; 1.0 \; M \right )\mid Ag\left ( s \right ) \tag{19.4.21} \)
\( cathode: \;\; Ag^{+}\left ( aq,\; 1.0 \; M \right )+e^{}\rightarrow Ag\left ( s \right ) \tag{19.4.22} \)
\( anode: \;\; Ag\left ( s \right )\rightarrow Ag^{+}\left ( aq,\; 0.010 \; M \right )+e^{} \tag{19.4.23} \)
\( overall: \;\; Ag^{+}\left ( aq,\; 1.0 \; M \right )\rightarrow Ag^{+}\left ( aq,\; 0.010 \; M \right ) \tag{19.4.24} \)
As the reaction progresses, the concentration of Ag^{+} will increase in the left (oxidation) compartment as the silver electrode dissolves, while the Ag^{+} concentration in the right (reduction) compartment decreases as the electrode in that compartment gains mass. The total mass of Ag(s) in the cell will remain constant, however. We can calculate the potential of the cell using the Nernst equation, inserting 0 for E°_{cell} because E°_{cathode} = −E°_{anode}:
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{n}\;log Q = 0\left ( \dfrac{0.0591\;V}{1} \right )log\dfrac{0.010}{1.0} = 0.12 \tag{19.4.25} \)
An electrochemical cell of this type, in which the anode and cathode compartments are identical except for the concentration of a reactant, is called a concentration cellAn electrochemical cell in which the anode and the cathode compartments are identical except for the concentration of a reactant.. As the reaction proceeds, the difference between the concentrations of Ag^{+} in the two compartments will decrease, as will E_{cell}. Finally, when the concentration of Ag^{+} is the same in both compartments, equilibrium will have been reached, and the measured potential difference between the two compartments will be zero (E_{cell} = 0).
Example 19.4.4
Calculate the voltage in a galvanic cell that contains a manganese electrode immersed in a 2.0 M solution of MnCl_{2} as the cathode, and a manganese electrode immersed in a 5.2 × 10^{−2} M solution of MnSO_{4} as the anode (T = 25°C).
Given: galvanic cell, identities of the electrodes, and solution concentrations
Asked for: voltage
Strategy:
A Write the overall reaction that occurs in the cell.
B Determine the number of electrons transferr
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{n}\;log \;Q = 0\left ( \dfrac{0.0591\;V}{2} \right )log\dfrac{5.2\times 10^{2}}{2.0} = 0.047 \)
ed. Substitute this value into the Nernst equation to calculate the voltage.
Solution:
A This is a concentration cell, in which the electrode compartments contain the same redox active substance but at different concentrations. The anions (Cl^{−} and SO_{4}^{2−}) do not participate in the reaction, so their identity is not important. The overall reaction is as follows:
Mn^{2+}(aq, 2.0 M) → Mn^{2+}(aq, 5.2 × 10^{−2} M)B For the reduction of Mn^{2+}(aq) to Mn(s), n = 2. We substitute this value and the given Mn^{2+} concentrations into Equation 19.4.17:
Thus manganese will dissolve from the electrode in the compartment that contains the more dilute solution and will be deposited on the electrode in the compartment that contains the more concentrated solution.
Exercise
Suppose we construct a galvanic cell by placing two identical platinum electrodes in two beakers that are connected by a salt bridge. One beaker contains 1.0 M HCl, and the other a 0.010 M solution of Na_{2}SO_{4} at pH 7.00. Both cells are in contact with the atmosphere, with P(O_{2}) = 0.20 atm. If the relevant electrochemical reaction in both compartments is the fourelectron reduction of oxygen to water, O_{2}(g) + 4H^{+}(aq) + 4e^{−} → 2H_{2}O(l), what will be the potential when the circuit is closed?
Answer: 0.41 V
Using Cell Potentials to Measure Solubility Products
Because voltages are relatively easy to measure accurately using a voltmeter, electrochemical methods provide a convenient way to determine the concentrations of very dilute solutions and the solubility products (K_{sp}) of sparingly soluble substances. As you learned in Chapter 17, solubility products can be very small, with values of less than or equal to 10^{−30}. Equilibrium constants of this magnitude are virtually impossible to measure accurately by direct methods, so we must use alternative methods that are more sensitive, such as electrochemical methods.
To understand how an electrochemical cell is used to measure a solubility product, consider the cell shown in Figure 19.4.3, which is designed to measure the solubility product of silver chloride: K_{sp} = [Ag^{+}][Cl^{−}]. In one compartment, the cell contains a silver wire inserted into a 1.0 M solution of Ag^{+}; the other compartment contains a silver wire inserted into a 1.0 M Cl^{−} solution saturated with AgCl. In this system, the Ag^{+} ion concentration in the first compartment equals K_{sp}. We can see this by dividing both sides of the equation for K_{sp} by [Cl^{−}] and substituting: [Ag^{+}] = K_{sp}/[Cl^{−}] = K_{sp}/1.0 = K_{sp}. The overall cell reaction is as follows:
Ag^{+}(aq, concentrated) → Ag^{+}(aq, dilute)Thus the voltage of the concentration cell due to the difference in [Ag^{+}] between the two cells is as follows:
\( E_{cell} = 0\left ( \dfrac{0.0591\;V}{1} \right )log\left (\dfrac{\left [Ag^{+} \right ]_{dilute}}{\left [Ag^{+} \right ]_{concentrated}} \right ) = 0.0591 \; V\; log\left ( \dfrac{K_{sp}}{1.0} \right )=0.0591\; V \tag{19.4.26}\)
Figure 19.4.3. A Galvanic Cell for Measuring the Solubility Product of AgCl One compartment contains a silver wire inserted into a 1.0 M solution of Ag^{+}, and the other compartment contains a silver wire inserted into a 1.0 M Cl^{−} solution saturated with AgCl. The potential due to the difference in [Ag^{+}] between the two cells can be used to determine K_{sp}.
By closing the circuit, we can measure the potential caused by the difference in [Ag^{+}] in the two cells. In this case, the experimentally measured voltage of the concentration cell at 25°C is 0.580 V. Solving Equation 19.4.26 for K_{sp},
\( log\;K_{sp} = \dfrac{E_{cell}}{0.0591\;V } = \dfrac{0.580\; \cancel{V}}{0.0591\;\cancel{V}} =9.81 \tag{19.4.27}\)
\( K_{sp}=1.5\times 10^{10}\)
Thus a single potential measurement can provide the information we need to determine the value of the solubility product of a sparingly soluble salt.
Example 19.4.5
To measure the solubility product of lead(II) sulfate (PbSO_{4}) at 25°C, you construct a galvanic cell like the one shown in Figure 19.4.3, which contains a 1.0 M solution of a very soluble Pb^{2+} salt [lead(II) acetate trihydrate] in one compartment that is connected by a salt bridge to a 1.0 M solution of Na_{2}SO_{4} saturated with PbSO_{4} in the other. You then insert a Pb electrode into each compartment and close the circuit. Your voltmeter shows a voltage of 230 mV. What is K_{sp} for PbSO_{4}? Report your answer to two significant figures.
Given: galvanic cell, solution concentrations, electrodes, and voltage
Asked for: K _{sp}
Strategy:
A From the information given, write the equation for K_{sp}. Express this equation in terms of the concentration of Pb^{2+}.
B Determine the number of electrons transferred in the electrochemical reaction. Substitute the appropriate values into Equation 19.4.26 and solve for K_{sp}.
Solution:
A You have constructed a concentration cell, with one compartment containing a 1.0 M solution of Pb^{2+} and the other containing a dilute solution of Pb^{2+} in 1.0 M Na_{2}SO_{4}. As for any concentration cell, the voltage between the two compartments can be calculated using the Nernst equation. The first step is to relate the concentration of Pb^{2+} in the dilute solution to K_{sp}:
\[ \left [ Pb^{2+} \right ]\left [ SO_{4}^{2} \right ]=K_{sp} \]
\[ \left [ Pb^{2+} \right ]=\dfrac{K_{sp}}{\left [ SO_{4}^{2} \right ]}=\dfrac{K_{sp}}{1.0 \; M}= K_{sp} \]
B The reduction of Pb^{2+} to Pb is a twoelectron process and proceeds according to the following reaction:
Pb^{2+}(aq, concentrated) → Pb^{2+}(aq, dilute)
so
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{n}\;log \;Q =
\(0.230\;V=0\left ( \dfrac{0.0591\;V}{2} \right )log \left (\dfrac{\left [ Pb^{2+} \right ]_{dilute}}{\left [ Pb^{2+} \right ]_{concentrated}} \right ) = 0.0296\; V\; log\left ( \dfrac{K_{sp}}{1.0} \right ) \)
\(7.77=log \; K_{sp} \)
\(1.7\times 10^{8} = K_{sp} \)
Exercise
A concentration cell similar to the one described in Example 11 contains a 1.0 M solution of lanthanum nitrate [La(NO_{3})_{3}] in one compartment and a 1.0 M solution of sodium fluoride saturated with LaF_{3} in the other. A metallic La strip is inserted into each compartment, and the circuit is closed. The measured potential is 0.32 V. What is the K_{sp} for LaF_{3}? Report your answer to two significant figures.
Answer: 5.7 × 10^{−17}
Using Cell Potentials to Measure Concentrations
Another use for the Nernst equation is to calculate the concentration of a species given a measured potential and the concentrations of all the other species. We saw an example of this in Example 11, in which the experimental conditions were defined in such a way that the concentration of the metal ion was equal to K_{sp}. Potential measurements can be used to obtain the concentrations of dissolved species under other conditions as well, which explains the widespread use of electrochemical cells in many analytical devices. Perhaps the most common application is in the determination of [H^{+}] using a pH meter, as illustrated in Example 12.
Example 19.4.6
Suppose a galvanic cell is constructed with a standard Zn/Zn^{2+} couple in one compartment and a modified hydrogen electrode in the second compartment (Figure 19.4.3). The pressure of hydrogen gas is 1.0 atm, but [H^{+}] in the second compartment is unknown. The cell diagram is as follows:
Zn(s)∣Zn^{2+}(aq, 1.0 M) ∥ H^{+}(aq, ? M)∣H_{2}(g, 1.0 atm)∣Pt(s)What is the pH of the solution in the second compartment if the measured potential in the cell is 0.26 V at 25°C?
Given: galvanic cell, cell diagram, and cell potential
Asked for: pH of the solution
Strategy:
A Write the overall cell reaction.
B Substitute appropriate values into the Nernst equation and solve for −log[H^{+}] to obtain the pH.
Solution:
A Under standard conditions, the overall reaction that occurs is the reduction of protons by zinc to give H_{2} (note that Zn lies below H_{2} in Table 19.3.1):
\( Zn\left ( s \right )+ 2H^{+}\left ( aq \right )\rightarrow Zn^{2+}\left ( aq \right )+H_{2}\left ( g \right )\;\;\; E_{o}=0.76\;V \)
B By substituting the given values into the simplified Nernst equation (Equation 19.64), we can calculate [H^{+}] under nonstandard conditions:
\( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{n}\;log \left ( \dfrac{\left [ Zn^{2+} \right ]P_{H_{2}}}{\left [ H^{+} \right ]^{2}} \right )
\(0.26\;V=0.76 \; V \left ( \dfrac{0.0591\;V}{2} \right )log \left ( \dfrac{\left ( 1.0 \right )\left ( 1.0 \right )}{\left [ H^{+} \right ]^{2}} \right ) = 0.0296\; V\; log\left ( \dfrac{K_{sp}}{1.0} \right ) \)
\(16.9=log\left ( \dfrac{1}{\left [ H^{+} \right ]^{2}} \right )=log\left [ H^{+} \right ]^{2} =2\;log\left [ H^{+} \right ]\)
\( 8.46 = log\left [ H^{+} \right ] \)
\(8.5 = pH \)
Thus the potential of a galvanic cell can be used to measure the pH of a solution.
Exercise
Suppose you work for an environmental laboratory and you want to use an electrochemical method to measure the concentration of Pb^{2+} in groundwater. You construct a galvanic cell using a standard oxygen electrode in one compartment (E°_{cathode} = 1.23 V). The other compartment contains a strip of lead in a sample of groundwater to which you have added sufficient acetic acid, a weak organic acid, to ensure electrical conductivity. The cell diagram is as follows”
Pb(s) ∣Pb^{2+}(aq, ? M)∥H^{+}(aq), 1.0 M∣O_{2}(g, 1.0 atm)∣Pt(s)When the circuit is closed, the cell has a measured potential of 1.62 V. Use Table 19.7.1 and Table T1 to determine the concentration of Pb^{2+} in the groundwater.
Answer: 1.2 × 10^{−9} M
Summary
A coulomb (C) relates electrical potential, expressed in volts, and energy, expressed in joules. The current generated from a redox reaction is measured in amperes (A), where 1 A is defined as the flow of 1 C/s past a given point. The faraday (F) is Avogadro’s number multiplied by the charge on an electron and corresponds to the charge on 1 mol of electrons. The product of the cell potential and the total charge is the maximum amount of energy available to do work, which is related to the change in free energy that occurs during the chemical process. Adding together the ΔG values for the halfreactions gives ΔG for the overall reaction, which is proportional to both the potential and the number of electrons (n) transferred. Spontaneous redox reactions have a negative ΔG and therefore a positive E_{cell}. Because the equilibrium constant K is related to ΔG, E°_{cell} and K are also related. Large equilibrium constants correspond to large positive values of E°. The Nernst equation allows us to determine the spontaneous direction of any redox reaction under any reaction conditions from values of the relevant standard electrode potentials. Concentration cells consist of anode and cathode compartments that are identical except for the concentrations of the reactant. Because ΔG = 0 at equilibrium, the measured potential of a concentration cell is zero at equilibrium (the concentrations are equal). A galvanic cell can also be used to measure the solubility product of a sparingly soluble substance and calculate the concentration of a species given a measured potential and the concentrations of all the other species.
Key Takeaway
 The Nernst equation can be used to determine the direction of spontaneous reaction for any redox reaction in aqueous solution.
Key Equations
Charge on a mole of electrons (faraday)
Equation 19.4.2: F ≈ 96,486 J/(V·mol)
Maximum work from an electrochemical cell
Equation 19.4.3: w_{max} = −nFE_{cell}
Relationship between Δ G ° and Δ E °
Equation 19.4.5: ΔG° = −nFE°_{cell}
Relationship between Δ G ° and K for a redox reaction
Equation 19.4.10: ΔG° = −RT ln K
Relationship between Δ E ° and K for a redox reaction at 25°C
Equation 19.4.12: \( E_{cell}^{o}=\left (\dfrac{RT}{nF} \right ) ln\;K \)
Equation 19.4.13: \( E_{cell}^{o}= \left ( \dfrac{0.0591}{n} \right )log\; K \)
Relationship between Δ G ° and Q
Equation 19.4.14: ΔG = ΔG° + RT ln Q
Relationship between E _{cell} and Q at 25°C
Equation 19.4.17: \( E_{cell} =E_{cell}^{o}\dfrac{0.0591\;V}{F}\;ln\;Q \)
Conceptual Problems

State whether you agree or disagree with this reasoning and explain your answer: Standard electrode potentials arise from the number of electrons transferred. The greater the number of electrons transferred, the greater the measured potential difference. If 1 mol of a substance produces 0.76 V when 2 mol of electrons are transferred—as in Zn(s) → Zn^{2+}(aq) + 2e^{−}—then 0.5 mol of the substance will produce 0.76/2 V because only 1 mol of electrons is transferred.

What is the relationship between the measured cell potential and the total charge that passes through a cell? Which of these is dependent on concentration? Which is dependent on the identity of the oxidant or the reductant? Which is dependent on the number of electrons transferred?

In the equation w_{max} = −nFE°_{cell}, which quantities are extensive properties and which are intensive properties?

For any spontaneous redox reaction, E is positive. Use thermodynamic arguments to explain why this is true.

State whether you agree or disagree with this statement and explain your answer: Electrochemical methods are especially useful in determining the reversibility or irreversibility of reactions that take place in a cell.

Although the sum of two halfreactions gives another halfreaction, the sum of the potentials of the two halfreactions cannot be used to obtain the potential of the net halfreaction. Why? When does the sum of two halfreactions correspond to the overall reaction? Why?

Occasionally, you will find highquality electronic equipment that has its electronic components plated in gold. What is the advantage of this?

Blood analyzers, which measure pH, P(CO_{2}) and P(O_{2}) are frequently used in clinical emergencies. For example, blood P(CO_{2}) is measured with a pH electrode covered with a plastic membrane that is permeable to CO_{2}. Based on your knowledge of how electrodes function, explain how such an electrode might work. Hint: CO_{2}(g) + H_{2}O(l) → HCO_{3}^{−}(aq) + H^{+}(aq).

Concentration cells contain the same species in solution in two different compartments. Explain what produces a voltage in a concentration cell. When does V = 0 in such a cell?

Describe how an electrochemical cell can be used to measure the solubility of a sparingly soluble salt.
Answers



extensive: w_{max} and n; intensive: E°_{cell}




Gold is highly resistant to corrosion because of its very positive reduction potential.



Numerical Problems

The chemical equation for the combustion of butane is as follows:
\( C_{4}H{10}\left ( g \right )+\dfrac{13}{2}O_{2}\left ( g \right )\rightarrow 2CO_{2}\left ( g \right )+5H_{2}O\left ( g \right ) \)
This reaction has ΔH° = −2877 kJ/mol. Calculate E°_{cell} and then determine ΔG°. Is this a spontaneous process? What is the change in entropy that accompanies this process at 298 K?

How many electrons are transferred during the reaction Pb(s) + Hg_{2}Cl_{2}(s) → PbCl_{2}(aq) + 2Hg(l)? What is the standard cell potential? Is the oxidation of Pb by Hg_{2}Cl_{2} spontaneous? Calculate ΔG° for this reaction.

For the cell represented as Al(s)∣Al^{3+}(aq)∥Sn^{2+}(aq), Sn^{4+}(aq)∣Pt(s), how many electrons are transferred in the redox reaction? What is the standard cell potential? Is this a spontaneous process? What is ΔG°?

Explain why the sum of the potentials for the halfreactions Sn^{2+}(aq) + 2e^{−} → Sn(s) and Sn^{4+}(aq) + 2e^{−} → Sn^{2+}(aq) does not equal the potential for the reaction Sn^{4+}(aq) + 4e^{−} → Sn(s). What is the net cell potential? Compare the values of ΔG° for the sum of the potentials and the actual net cell potential.

Based on Table 19.3.1 and Table P1, do you agree with the proposed potentials for the following halfreactions? Why or why not?
 Cu^{2+}(aq) + 2e^{−} → Cu(s), E° = 0.68 V
 Ce^{4+}(aq) + 4e^{−} → Ce(s), E° = −0.62 V

For each reaction, calculate E°_{cell} and then determine ΔG°. Indicate whether each reaction is spontaneous.
 2Na(s) + 2H_{2}O(l) → 2NaOH(aq) + H_{2}(g)
 K_{2}S_{2}O_{6}(aq) + I_{2}(s) → 2KI(aq) + 2K_{2}SO_{4}(aq)
 Sn(s) + CuSO_{4}(aq) → Cu(s) + SnSO_{4}(aq)

What is the standard change in free energy for the reaction between Ca^{2+} and Na(s) to give Ca(s) and Na^{+}? Do the sign and magnitude of ΔG° agree with what you would expect based on the positions of these elements in the periodic table? Why or why not?

In acidic solution, permanganate (MnO_{4}^{−}) oxidizes Cl^{−} to chlorine gas, and MnO_{4}^{−} is reduced to Mn^{2+}(aq).
 Write the balanced chemical equation for this reaction.
 Determine E°_{cell}.
 Calculate the equilibrium constant.

Potentiometric titrations are an efficient method for determining the endpoint of a redox titration. In such a titration, the potential of the solution is monitored as measured volumes of an oxidant or a reductant are added. Data for a typical titration, the potentiometric titration of Fe(II) with a 0.1 M solution of Ce(IV), are given in the following table. The starting potential has been arbitrarily set equal to zero because it is the change in potential with the addition of the oxidant that is important.
Titrant (mL) E (mV) 2.00 50 6.00 100 9.00 255 10.00 960 11.00 1325 12.00 1625 14.00 1875  Write the balanced chemical equation for the oxidation of Fe^{2+} by Ce^{4+}.
 Plot the data and then locate the endpoint.
 How many millimoles of Fe^{2+} did the solution being titrated originally contain?

The standard electrode potential (E°) for the halfreaction Ni^{2+}(aq) + 2e^{−} → Ni(s) is −0.257 V. What pH is needed for this reaction to take place in the presence of 1.00 atm H_{2}(g) as the reductant if [Ni^{2+}] is 1.00 M?

The reduction of Mn(VII) to Mn(s) by H_{2}(g) proceeds in five steps that can be readily followed by changes in the color of the solution. Here is the redox chemistry:
 MnO_{4}^{−}(aq) + e^{−} → MnO_{4}^{2−}(aq); E° = +0.56 V (purple → dark green)
 MnO_{4}^{2−}(aq) + 2e^{−} + 4H^{+}(aq) → MnO_{2}(s); E° = +2.26 V (dark green → dark brown solid)
 MnO_{2}(s) + e^{−} + 4H^{+}(aq) → Mn^{3+}(aq); E° = +0.95 V (dark brown solid → redviolet)
 Mn^{3+}(aq) + e^{−} → Mn^{2+}(aq); E° = +1.51 V (redviolet → pale pink)
 Mn^{2+}(aq) + 2e^{−} → Mn(s); E° = −1.18 V (pale pink → colorless)
 Is the reduction of MnO_{4}^{−} to Mn^{3+}(aq) by H_{2}(g) spontaneous under standard conditions? What is E°_{cell}?
 Is the reduction of Mn^{3+}(aq) to Mn(s) by H_{2}(g) spontaneous under standard conditions? What is E°_{cell}?

Mn(III) can disproportionate (both oxidize and reduce itself) by means of the following halfreactions:
Mn^{3+}(aq) + e^{−} → Mn^{2+}(aq); E° = +1.51 V
Mn^{3+}(aq) + 2H_{2}O(l) → MnO_{2}(s) + 4H^{+}(aq) + e^{−}; E° = +0.95 V
 What is E° for the disproportionation reaction?
 Is disproportionation more or less thermodynamically favored at low pH than at pH 7.0? Explain your answer.
 How could you prevent the disproportionation reaction from occurring?

For the reduction of oxygen to water, E° = 1.23 V. What is the potential for this halfreaction at pH 7.00? What is the potential in a 0.85 M solution of NaOH?

The biological molecule abbreviated as NADH (reduced nicotinamide adenine dinucleotide) can be formed by reduction of NAD^{+} (nicotinamide adenine dinucleotide) via the halfreaction NAD^{+} + H^{+} + 2e^{−} → NADH; E° = −0.32 V.
 Would NADH be able to reduce acetate to pyruvate?
 Would NADH be able to reduce pyruvate to lactate?
 What potential is needed to convert acetate to lactate?
acetate + CO_{2} + 2H^{+} + 2e^{−}→ pyruvate + H_{2}O; E° = +0.70 V
pyruvare + 2H^{+} +2e^{−}→ lactate; E° = 0.185 V

Given the following biologically relevant halfreactions, will FAD (flavin adenine dinucleotide), a molecule used to transfer electrons whose reduced form is FADH_{2}, be an effective oxidant for the conversion of acetaldehyde to acetate at pH 4.00?
acetate + 2H^{+} + 2e^{−}→ acetaldehyde + H_{2}O; E° = 0.58 V
FAD + 2H^{+} + 2e^{−}→ FADH_{2}; E° = 0.18 V

Ideally, any halfreaction with E° > 1.23 V will oxidize water as a result of the halfreaction O_{2}(g) + 4H^{+}(aq) + 4e^{−} → 2H_{2}O(l).
 Will FeO_{4}^{2−} oxidize water if the halfreaction for the reduction of Fe(VI) → Fe(III) is FeO_{4}^{2−}(aq) + 8H^{+}(aq) + 3e^{−} → Fe^{3+}(aq) + 4H_{2}O; E° = 1.9 V?
 What is the highest pH at which this reaction will proceed spontaneously if [Fe^{3+}] = [FeO_{4}^{2−}] = 1.0 M and <math display="inline" xml:id="av_1.019_m077"><semantics><mrow><msub><mi>P</mi><mrow><msub><mtext>O</mtext><mn>2</mn></msub></mrow></msub></mrow></semantics></math> = 1.0 atm?

Under acidic conditions, ideally any halfreaction with E° > 1.23 V will oxidize water via the reaction
O_{2}(g) + 4H^{+}(aq) + 4e^{−} → 2H_{2}O(l). Will aqueous acidic KMnO_{4} evolve oxygen with the formation of MnO_{2}?
 At pH 14.00, what is E° for the oxidation of water by aqueous KMnO_{4} (1 M) with the formation of MnO_{2}?
 At pH 14.00, will water be oxidized if you are trying to form MnO_{2} from MnO_{4}^{2−} via the reactio
2MnO_{4}^{2−}(aq) + 2H_{2}O(l) → 2MnO_{2}(s) + O_{2}(g) + 4OH^{−}(aq)?

Complexing agents can bind to metals and result in the net stabilization of the complexed species. What is the net thermodynamic stabilization energy that results from using CN^{−} as a complexing agent for Mn^{3+}/Mn^{2+}?
Mn^{3+}(aq) + e^{−} → Mn^{2+}(aq); E° = +1.51 V
Mn(CN)_{6}^{3}(aq) + e^{−} → Mn(CN)_{6}^{4}(aq); E° = 0.24V

You have constructed a cell with zinc and lead amalgam electrodes described by the cell diagram Zn(Hg)(s)∣Zn(NO_{3})_{2}(aq)∥Pb(NO_{3})_{2}(aq)∣Pb(Hg)(s). If you vary the concentration of Zn(NO_{3})_{2} and measure the potential at different concentrations, you obtain the following data:
Zn(NO_{3})_{2} (M) E_{cell} (V) 0.0005 0.7398 0.002 0.7221 0.01 0.7014  Write the halfreactions that occur in this cell.
 What is the overall redox reaction?
 What is E°_{cell}? What is ΔG° for the overall reaction?
 What is the equilibrium constant for this redox reaction?

Hydrogen gas reduces Ni^{2+} according to the following reaction: Ni^{2+}(aq) + H_{2}(g) → Ni(s) + 2H^{+}(aq); E°_{cell} = −0.25 V; ΔH = 54 kJ/mol.
 What is K for this redox reaction?
 Is this reaction likely to occur?
 What conditions can be changed to increase the likelihood that the reaction will occur as written?
 Is the reaction more likely to occur at higher or lower pH?

The silver–silver bromide electrode has a standard potential of 0.07133 V. What is K_{sp} of AgBr?
Answers



6e^{−}; E°_{cell} = 1.813 V; the reaction is spontaneous; ΔG° = −525 kJ/mol Al.












yes; E° = 0.40 V


 yes; E° = 0.45 V
 0.194 V
 yes; E° = 0.20 V



