A first-order reaction is a reaction that proceeds at a rate that depends linearly on only one reactant concentration.
The Differential Representation
Differential rate laws are generally used to describe what is occurring on a molecular level during a reaction, whereas integrated rate laws are used for determining the reaction order and the value of the rate constant from experimental measurements. The differential equation describing first-order kinetics is given below:
The "rate" is the reaction rate (in units of molar/time) and \(k\) is the reaction rate coefficient (in units of 1/time). However, the units of \(k\) vary for non-first-order reactions. These differential equations are separable, which simplifies the solutions as demonstrated below.
The Integral Representation
First, write the differential form of the rate law.
where [A] is the concentration at time \(t\) and \([A]_o\) is the concentration at time 0, and \(k\) is the first-order rate constant.
Because the logarithms of numbers do not have any units, the product \(-kt\) also lacks units. This concludes that unit of \(k\) in a first order of reaction must be time-1. Examples of time-1 include s-1 or min-1. Thus, the equation of a straight line is applicable:
\[ \ln [A] = -kt + \ln [A]_o.\label{15} \]
To test if it the reaction is a first-order reaction, plot the natural logarithm of a reactant concentration versus time and see whether the graph is linear. If the graph is linear and has a negative slope, the reaction must be a first-order reaction.
To create another form of the rate law, raise each side of the previous equation to the exponent, \(e\):
Simplifying gives the second form of the rate law:
\[ [A] = [A]_{o}e^{- kt}\label{17} \]
The integrated forms of the rate law can be used to find the population of reactant at any time after the start of the reaction. Plotting \(\ln[A]\) with respect to time for a first-order reaction gives a straight line with the slope of the line equal to \(-k\). More information can be found in the article on rate laws.
This general relationship, in which a quantity changes at a rate that depends on its instantaneous value, is said to follow an exponential law. Exponential relations are widespread in science and in many other fields. Consumption of a chemical reactant or the decay of a radioactive isotope follow the exponential decay law. Its inverse, the law of exponential growth, describes the manner in which the money in a continuously-compounding bank account grows with time, or the population growth of a colony of reproducing organisms. The reason that the exponential function \(y=e^x\) so efficiently describes such changes is that dy/dx = ex; that is, ex is its own derivative, making the rate of change of \(y\) identical to its value at any point.
Graphing First-order Reactions
The following graphs represents concentration of reactants versus time for a first-order reaction.
Plotting \(\ln[A]\) with respect to time for a first-order reaction gives a straight line with the slope of the line equal to \(-k\).
Half-lives of first order reactions
The half-life (\(t_{1/2}\)) is a timescale on which the initial population is decreased by half of its original value, represented by the following equation.
\[ [A] = \dfrac{1}{2} [A]_o \nonumber \]
After a period of one half-life, \(t = t_{1/2}\) and we can write
As a check, dimensional analysis can be used to confirm that this calculation generates the correct units of inverse time.
Notice that, for first-order reactions, the half-life is independent of the initial concentration of reactant, which is a unique aspect to first-order reactions. The practical implication of this is that it takes as much time for [A] to decrease from 1 M to 0.5 M as it takes for [A] to decrease from 0.1 M to 0.05 M. In addition, the rate constant and the half life of a first-order process are inversely related.
Example \(\PageIndex{1}\): Determining Half life
If 3.0 g of substance \(A\) decomposes for 36 minutes the mass of unreacted A remaining is found to be 0.375 g. What is the half life of this reaction if it follows first-order kinetics?
Solution
There are two ways to approach this problem: The "simple inspection approach" and the "brute force approach"
Approach #1: "The simple Inspection Approach"
This approach is used when one can recognize that the final concentration of \(A\) is \(\frac{1}{8}\) of the initial concentration and hence three half lives \(\left(\frac{1}{2} \times \frac{1}{2} \times \frac{1}{2}\right)\) have elapsed during this reaction.
This approach works only when the final concentration is \(\left(\frac{1}{2}\right)^n\) that of the initial concentration, then \(n\) is the number of half lives that have elapsed. If this is not the case, then approach #2 can be used.
Approach #2: "The brute force approach"
This approach involves solving for \(k\) from the integral rate law (Equation \ref{17}) and then relating \(k\) to the \(t_{1/2}\) via Equation \ref{20}. \[\begin{align*} \dfrac{[A]_t}{[A]_o} &= e^{-k\,t} \\[4pt] k &= -\dfrac{\ln \dfrac{[A]_t}{[A]_o}}{t} \\[4pt] &= -\dfrac{\ln \dfrac{0.375\, g}{3\, g}}{36\, \text{min}} \\[4pt] &= 0.0578 \, \text{min}^{-1} \end{align*} \] Therefore, via Equation \ref{20} \[t_{1/2}=\dfrac{\ln{2}}{k} \approx \dfrac{0.693}{0.0578 \, \text{min}^{-1}} \approx 12\, \text{min} \nonumber \]
The first approach is considerably faster (if the number of half lives evolved is apparent).
Exercise \(\PageIndex{2a}\)
Calculate the half-life of the reactions below:
If 4.00 g A are allowed to decompose for 40 min, the mass of A remaining undecomposed is found to be 0.80 g.
If 8.00 g A are allowed to decompose for 34 min, the mass of A remaining undecomposed is found to be 0.70 g.
If 9.00 g A are allowed to decompose for 24 min, the mass of A remaining undecomposed is found to be 0.50 g.
Answer
Use the half life reaction that contains initial concentration and final concentration. Plug in the appropriate variables and solve to obtain:
17.2 min
9.67 min
5.75 min
Exercise \(\PageIndex{2b}\)
Determine the percent \(\ce{H2O2}\) that decomposes in the time using \(k=6.40 \times 10^{-5} s^{-1}\)
The time for the concentration to decompose is 600.0 s after the reaction begins.
The time for the concentration to decompose is 450 s after the reaction begins.
Answer
Rearranging Eq. 17 to solve for the \([H_2O_2]_t/[H_2O_2]_0\)ratio \[\dfrac{[H_2O_2]_t}{[H_2O_2]_0} = e^{-kt} \nonumber \] This is a simple plug and play application once you have identified this equation. \[\dfrac{[H_2O_2]_{t=600\;s}}{[H_2O_2]_0} = e^{-(6.40 \times 10^{-5} s^{-1}) (600 \, s)} \nonumber \] \[\dfrac{[H_2O_2]_{t=600\;s}}{[H_2O_2]_0} = 0.9629 \nonumber \] So 100-96.3=3.71% of the hydrogen peroxide has decayed by 600 s.
Rearranging Eq. 17 to solve for the \([H_2O_2]_t/[H_2O_2]_0\)ratio \[\dfrac{[H_2O_2]_t}{[H_2O_2]_0} = e^{-kt} \nonumber \] This is a simple plug and play application once you have identified this equation. \[\dfrac{[H_2O_2]_{t=450\;s}}{[H_2O_2]_0} = e^{-(6.40 \times 10^{-5} s^{-1}) (450 \, s)} \nonumber \] \[\dfrac{[H_2O_2]_{t=450\;s}}{[H_2O_2]_0} = 0.9720 \nonumber \] So 100-97.2=2.8% of the hydrogen peroxide has decayed by 450 s.
References
Petrucci, Ralph H. General Chemistry: Principles and Modern Applications 9th Ed. New Jersey: Pearson Education Inc. 2007.