# 2.12: Formulas and Composition

- Page ID
- 49451

We have presented a microscopic view of the chemical reaction between mercury and bromine. The equation

\[\text{Hg}(l) +\] | \[\text{Br}_{2}(l) \rightarrow\] | \[\text{HgBr}_{2}(s)\] |

represents the same event in terms of chemical symbols and formulas, while the pictures below represent the macroscopic view. But how does a practicing chemist *find out* what is occurring on the microscopic scale? When a reaction is carried out for the first time, little is known about the microscopic nature of the products. It is therefore necessary to determine *experimentally* the composition and formula of a newly synthesized substance.

The first step in such a procedure is usually to separate and purify the products of a reaction. For example, although the combination of mercury with bromine produces mainly mercuric bromide, a little mercurous bromide is often formed as well. A mixture of mercurous bromide with mercuric bromide has properties which are different from a pure sample of HgBr_{2}, and so the Hg_{2}Br_{2} must be removed. The low solubility of Hg_{2}Br_{2} in water would permit purification by recrystallization. The product could be dissolved in a small quantity of hot water and filtered to remove undissolved Hg_{2}Br_{2}. Upon cooling and partial evaporation of the water, crystals of relatively pure HgBr_{2} would form.

Once a pure product has been obtained, it may be possible to identify the substance by means of its physical and chemical properties. The reaction of mercury with bromine yields white crystals which melt at 236°C. The liquid which is formed boils at 322°C. Since it is made by combining two elements, the product is a compound. Comparing its properties with a handbook or table of data leads to the conclusion that it is mercuric bromide.

But suppose you were the *first* person who ever prepared mercuric bromide. There were no tables which listed its properties then, and so how could you determine that the formula should be HgBr_{2}? One answer involves **quantitative analysis**—the determination of the percentage by mass of each element in the compound. Such data are usually reported as the **percent composition**.

Example \(\PageIndex{1}\): Percent Composition

When 10.0 g mercury reacts with sufficient bromine, 18.0 g of a pure compound is formed. Calculate the percent composition from these experimental data.

**Solution:**

The percentage of mercury is the mass of mercury divided by the total mass of compound times 100 percent:

\[ \text{ }\%\text{ Hg} = \dfrac{m_{\text{Hg}}}{m_{\text{compound}}}\text{ } \cdot 100\%\ = \dfrac{\text{10.0 g}}{\text{18.0 g}}\text{ } \cdot 100\%\text{ = 55.6 }\%\text{ }\]

The remainder of the compound (18.0 g – 10 g = 8.0 g) is bromine:

\[ \text{ }\%\text{ Br = } \dfrac{m_{\text{Br}}}{m_{\text{compound}}}\text{ } \cdot \text{ 100 }\%\text{ = } \dfrac{\text{8.0 g}}{\text{18.0 g}}\text{ } \cdot \text{ 100 } \%\text{ = 44.4 } \% \text{ }\]

As a check, verify that the percentages add to 100:

\[ 55.6\% + 44.4\% = 100\%\]

To obtain the formula from percent-composition data, we must find how many bromine atoms there are per mercury atom. On a macroscopic scale this corresponds to the ratio of the amount of bromine to the amount of mercury. If the formula is HgBr_{2}, it not only indicates that there are two bromine *atoms* per mercury *atom*, it also says that there are 2 *mol* of bromine atoms for each 1 *mol* of mercury atoms. That is, the *amount* of bromine is twice the *amount* of mercury. The numbers in the ratio of the amount of bromine to the amount of mercury (2:1) are the subscripts of bromine and mercury in the formula.

Example \(\PageIndex{2}\) : Formula

Determine the formula for the compound whose percent composition was calculated in the previous example.

**Solution:**

For convenience, assume that we have 100 g of the compound. Of this, 55.6 g (55.6%) is mercury and 44.4 g is bromine. Each mass can be converted to an amount of substance

\(\begin{align} & n_{\text{Hg}}=\text{55.6 g}\cdot \dfrac{\text{1 mol Hg}}{\text{200.59 g}} =\text{0.277 mol Hg} \\ { } \\ & n_{\text{Hg}}=\text{44.4 g}\cdot \dfrac{\text{1 mol Br}}{\text{79.90 g}} =\text{0.556 mol Br} \end{align}\)

Dividing the larger amount by the smaller, we have

\[ \dfrac{n_{\text{Br}}}{n_{\text{Hg}}} = \dfrac{\text{0}\text{.556 mol Br}}{\text{0}\text{.227 mol Hg}} = \dfrac{\text{2}\text{.01 mol Br}}{\text{1 mol Hg}}\]

The ratio 2.01 mol Br to 1 mol Hg also implies that there are 2.01 Br atoms per 1 Hg atom. If the atomic theory is correct, there is no such thing as 0.01 Br atom; furthermore, our numbers are only good to three significant figures. Therefore we round 2.01 to 2 and write the formula as HgBr_{2}.

Example \(\PageIndex{3}\): Formula Calculation

A bromide of mercury has the composition 71.5% Hg, 28.5% Br. Find its formula.

**Solution: **

Again assume a 100-g sample and calculate the amount of each element:

\(\begin{align} & n_{\text{Hg}}=\text{71}\text{.5 g}\cdot \dfrac{\text{1 mol Hg}}{\text{200.59 g}} = \text{0.356 mol Hg} \\ { } \\ & n_{\text{Hg}}=\text{28.5 g}\cdot \dfrac{\text{1 mol Br}}{\text{79.90 g}} =\text{0.357 mol Br} \end{align}\)

The ratio is

\[ \dfrac{n_{\text{Br}}}{n_{\text{Hg}}} = \dfrac{\text{0.357 mol Br}}{\text{0.356 mol Hg}} = \dfrac{\text{1.00 mol Br}}{\text{1 mol Hg}}\]

We would therefore assign the formula HgBr.

The formula obtained in Example \(\PageIndex{3}\) does not correspond to either of the two mercury bromides we have already discussed. Is it a third one? The answer is no because our method can only determine the *ratio* of Br to Hg. The ratio 1:1 is the same as 2:2, and so our method will give the same result for HgBr or Hg_{2}Br_{2} (or Hg_{7}Br_{7}, for that matter, should it exist). The formula determined by this method is called the **empirical formula** or **simplest formula**. Occasionally, as in the case of mercurous bromide, the empirical formula differs from the actual molecular composition, or the **molecular formula**. Experimental determination of the molecular weight in addition to percent composition permits calculation of the molecular formula.

Example \(\PageIndex{4}\):

A compound whose molecular weight is 28 contains 85.6% C and 14.4% H. Determine its empirical and molecular formulas.

**Solution:**

\(\begin{align} & n_{\text{C}}=\text{85.6 g}\cdot \dfrac{\text{1 mol C}}{\text{12.01 g}} =\text{7.13 mol C} \\ { } \\ & n_{\text{H}}=\text{14.4 g}\cdot \dfrac{\text{1 mol H}}{\text{1.008 g}} =\text{14.3 mol H} \end{align}\)

\[ \dfrac{n_{\text{H}}}{n_{\text{C}}} = \dfrac{\text{14.3 mol H}}{\text{7.13 mol C}} = \dfrac{\text{2.01 mol H}}{\text{1 mol C}}\]

The empirical formula is therefore CH_{2}. The molecular weight corresponding to the empirical formula is

\[ 12.01 + 2 \cdot 1.008 = 14.03\]

Since the experimental molecular weight is twice as great, all subscripts must be doubled and the molecular formula is C_{2}H_{4}.

Occasionally the ratio of amounts is not a whole number.

Example \(\PageIndex{5}\): Empirical Formula

Aspirin contains 60.0% C, 4.48% H, and 35.5% O. What is its empirical formula?

**Solution:**

\(\begin{align} & n_{\text{H}}=\text{14.4 g}\cdot \dfrac{\text{1 mol H}}{\text{1.008 g}} =\text{14.3 mol H} \\ { } \\& n_{\text{C}}=\text{85.6 g}\cdot \dfrac{\text{1 mol C}}{\text{12.01 g}} =\text{7.13 mol C} \\ { } \\ & n_{\text{O}}=\text{35.5 g}\cdot \dfrac{\text{1 mol O}}{\text{16.00 g}} =\text{2.22 mol O} \end{align}\)

Divide all three by the smallest amount of substance

\(\begin{align} & \dfrac{n_{\text{C}}}{n_{\text{O}}} = \dfrac{\text{5.00 mol C}}{\text{2.22 mol O}} =\dfrac{\text{2.25 mol H}}{\text{1 mol O}} \\ { } \\ & \dfrac{n_{\text{H}}}{n_{\text{O}}}=\dfrac{\text{4.44 mol H}}{\text{2.22 mol O}}= \dfrac{\text{2.00 mol H}}{\text{1 mol O}} \end{align}\)

Clearly there are twice as many H atoms as O atoms, but the ratio of C to O is not so obvious. We must convert 2.25 to a ratio of small whole numbers. This can be done by changing the figures after the decimal point to a fraction. In this case, .25 becomes \(\small \dfrac{1}{4}\). Thus \( 2.25 = 2 \small\dfrac{1}{4} \normalsize = \tfrac{\text{9}}{\text{4}}\), and

\[ \dfrac{n_{\text{C}}}{n_{\text{O}}} = \dfrac{\text{2.25 mol C}}{\text{1 mol O}} = \dfrac{\text{9 mol C}}{\text{4 mol O}}\]

We can also write

\[ \dfrac{n_{\text{H}}}{n_{\text{O}}} = \dfrac{\text{2 mol H}}{\text{1 mol O}} = \dfrac{\text{8 mol H}}{\text{4 mol O}}\]

Thus the empirical formula is C_{9}H_{8}O_{4}.

Once someone has determined a formula–empirical or molecular—it is possible for someone else to do the reverse calculation. Finding the weight-percent composition from the formula often proves quite informative, as the following example shows.

Example \(\PageIndex{6}\): Percent Nitrogen

In order to replenish nitrogen removed from the soil when plants are harvested, the compounds NaNO_{3} (sodium nitrate), NH_{4}NO_{3} (ammonium nitrate), and NH_{3} (ammonia) are used as fertilizers. If a farmer could buy each at the same cost per gram, which would be the best bargain? In other words, which compound contains the largest percentage of nitrogen?

**Solution**

We will show the detailed calculation only for the case of NH_{4}NO_{3}.

1 mol NH_{4}NO_{3} contains 2 mol N, 4 mol H, and 3 mol O. The molar mass is thus

\[ M = (2 \cdot 14.01 + 4 \cdot 1.008 + 3 \cdot 16.00) \text{ g} \text{ mol}^{-1} = 80.05 \text{ g} \text{ mol}^{-1}\]

A 1-mol sample would weigh 80.05 g. The mass of 2 mol N it contains is

\[ m_{\text{N}}\text{ = 2 mol N }\cdot \text{ } \dfrac{\text{14.01 g}}{\text{1 mol N}} \text{ = 28.02 g}\]

Therefore the percentage of N is

\[\text{ } \%\text{ N = } \dfrac{m_{\normalsize\text{N}}}{m_{\normalsize\text{NH}_{\text{4}}\text{NO}_{\text{3}}}}\text{ } \cdot \text{ 100 }\%\text{ = } \dfrac{\text{28.02 g}}{\text{80.05 g}}\text{ } \cdot \text{ 100 }\%\text{ = 35}\text{.00 }\%\text{ }\]

The percentages of H and O are easily calculated as

\(\begin{align} m_{\text{H}}& = \text{4 mol H }\cdot\dfrac{\text{1.008 g}}{\text{1 mol H}}\text{ = 4.032 g} \\ { } \\ \text{ }\%\text{ H } & = \dfrac{\text{4.032 g}}{\text{80.05 g}} \cdot \text{ 100 }\%\text{ = 5.04 }\%\ \\ { } \\ m_{\text{O}}& = \text{3 mol O }\cdot \dfrac{\text{16.00 g}}{\text{1 mol O}} \text{ = 48.00 g} \\ { } \\ \%\text{ O } & = \dfrac{\text{48.00 g}}{\text{80.05 g}}\text{ }\cdot \text{ 100 }\%\text{ = 59.96 }\%\text{ } \end{align}\)

Though not strictly needed to answer the problem, the latter two percentages provide a check of the results. The total \(35.00 + 5.04\% + 59.96\% = 100.00\%\) as it should. Similar calculations for NaNO_{3} and NH_{3} yield 16.48% and 82.24% nitrogen, respectively. The farmer who knows chemistry chooses ammonia!

## Contributors and Attributions

Ed Vitz (Kutztown University), John W. Moore (UW-Madison), Justin Shorb (Hope College), Xavier Prat-Resina (University of Minnesota Rochester), Tim Wendorff, and Adam Hahn.