Q21.1.1
Why are many radioactive substances warm to the touch? Why do many radioactive substances glow?
Q21.1.2
Describe the differences between nonionizing and ionizing radiation in terms of the intensity of energy emitted and the effect each has on an atom or molecule after collision. Which nuclear decay reactions are more likely to produce ionizing radiation? nonionizing radiation?
Q21.1.3
Would you expect nonionizing or ionizing radiation to be more effective at treating cancer? Why?
S21.1.3
Ionizing radiation is higher in energy and causes greater tissue damage, so it is more likely to destroy cancerous cells.
Q21.1.4
Historically, concrete shelters have been used to protect people from nuclear blasts. Comment on the effectiveness of such shelters.
Q21.1.5
Gamma rays are a very high-energy radiation, yet α particles inflict more damage on biological tissue. Why?
Q21.1.6
List the three primary sources of naturally occurring radiation. Explain the factors that influence the dose that one receives throughout the year. Which is the largest contributor to overall exposure? Which is the most hazardous?
S21.1.6
Three primary naturally occurring radiations are radium, uranium and thorium, each all having long half lives. Inhalation of air, ingestion of food and water,terrestrial radation from the ground and cosmic radiation from space are all factors tat influence the does that a person receives throughout the year. Inhalation of the air is the largest contributor to exposure. Radiation can damage DNA or kill cells. When radiation is exposed to your body, it will collide with atoms and this will change and damage your DNA.
Q21.1.7
Because radon is a noble gas, it is inert and generally unreactive. Despite this, exposure to even low concentrations of radon in air is quite dangerous. Describe the physical consequences of exposure to radon gas. Why are people who smoke more susceptible to these effects?
Q21.1.8
Most medical imaging uses isotopes that have extremely short half-lives. These isotopes usually undergo only one kind of nuclear decay reaction. Which kind of decay reaction is usually used? Why? Why would a short half-life be preferred in these cases?
Beta decay. Alfa decay can be easily stopped by paper, which means it can not be used to see inside people's body. Also, Gamma rays are really dangerous for human, that even a short period of time exploding to it will have negative effect on human body. Thus, Beta decay is the perfect choice. It can be used to see through human's body and stopped by aluminum or some other metals.
Since all these radioactive decays are harmful for human body, if the half time of these reactions are short, the time exploding to these reactions will be short too.
Q21.1.9
Which would you prefer: one exposure of 100 rem, or 10 exposures of 10 rem each? Explain your rationale.
S21.1.9
Ten exposures of 10 rem are less likely to cause major damage.
Q21.1.10
A 2.14 kg sample of rock contains 0.0985 g of uranium. How much energy is emitted over 25 yr if 99.27% of the uranium is 238U, which has a half-life of 4.46 × 109 yr, if each decay event is accompanied by the release of 4.039 MeV? If a 180 lb individual absorbs all of the emitted radiation, how much radiation has been absorbed in rads?
Q21.1.11
There is a story about a “radioactive boy scout” who attempted to convert thorium-232, which he isolated from about 1000 gas lantern mantles, to uranium-233 by bombarding the thorium with neutrons. The neutrons were generated via bombarding an aluminum target with α particles from the decay of americium-241, which was isolated from 100 smoke detectors. Write balanced nuclear reactions for these processes. The “radioactive boy scout” spent approximately 2 h/day with his experiment for 2 yr. Assuming that the alpha emission of americium has an energy of 5.24 MeV/particle and that the americium-241 was undergoing 3.5 × 106 decays/s, what was the exposure of the 60.0 kg scout in rads? The intrepid scientist apparently showed no ill effects from this exposure. Why?
241/95 Am---> 4/2 He + 237/93Np---> 4/2He + 233/91Pa----> 1/0n+ 232/91Th---> 1/1 H + 233/92 U
By adding alpha particles to the products side of the reaction, he was able to reduce the mass number by 4 and the atomic number by 2 to get the products he wanted. Bombardment with neutrons and 1 H was required to lower to the mass number to get Th and then raise both the mass number and the atomic number to yield Uranium.
2 hours*365*2= 1460 hours of exposure.*60min/1hr*60s/1min= 5.26*10^6s of exposure
1MeV= (1.6022*10^-13 Joules) * (5.24 MeV/particle)*2 particles= 1.679*10^-12 Joules.
(1.679*10^-12 Joules) * (1 amu/ 1.4924*10^-10 Joules)= 2.51*10^-13 amu
E=mc^2
E=(2.51*10^-13 amu)(1.66*10^-22kg/amu)(2.9998*10^8m/s)^2= (3.75*10^-18 kgm^2/s)*(3.5*10^6 decays/s)= 1.31*10^-11 joules of exposure per second.
The scientist showed no ill effects from this exposure because if we multiple the energy in joules of exposure per second, 1.31*10^-11, by the total amount of seconds of exposure, 5.26*10^6s, we find that he was only exposed to 6.9*10^-5 joules of radiation throughout the span of two years. This is a very small amount of radiation for such a long span of time.
In order to plug in the values for this equation, we must convert the given MeV to Joules with the known conversion rate. Similarly, we must convert Joules to amu with another known conversion rate. Then we can plug in the values and multiply by c^2 but we must not forget to multiple the amu by the conversion rate to kg in order to yield Joules. After all of this is done, we multiple the amount of Joules of exposure per second by the total amount of exposure in seconds in order to find out the total amount of exposure over the two year span.
Q21.2.1
How do chemical reactions compare with nuclear reactions with respect to mass changes? Does either type of reaction violate the law of conservation of mass? Explain your answers.
Q21.2.2
Why is the amount of energy released by a nuclear reaction so much greater than the amount of energy released by a chemical reaction?
Q21.2.3
Explain why the mass of an atom is less than the sum of the masses of its component particles.
Q21.2.4
The stability of a nucleus can be described using two values. What are they, and how do they differ from each other?
Q21.2.5
In the days before true chemistry, ancient scholars (alchemists) attempted to find the philosopher’s stone, a material that would enable them to turn lead into gold. Is the conversion of Pb → Au energetically favorable? Explain why or why not.
Q21.2.6
Describe the energy barrier to nuclear fusion reactions and explain how it can be overcome.
Q21.2.7
Imagine that the universe is dying, the stars have burned out, and all the elements have undergone fusion or radioactive decay. What would be the most abundant element in this future universe? Why?
Q21.2.8
Numerous elements can undergo fission, but only a few can be used as fuels in a reactor. What aspect of nuclear fission allows a nuclear chain reaction to occur?
Q21.2.9
How are transmutation reactions and fusion reactions related? Describe the main impediment to fusion reactions and suggest one or two ways to surmount this difficulty.
Q21.2.10
Using the information provided in Chapter 33, complete each reaction and calculate the amount of energy released from each in kilojoules.
- 238Pa → ? + β−
- 216Fr → ? + α
- 199Bi → ? + β+
Q21.2.22
Using the information provided in Chapter 33, complete each reaction and calculate the amount of energy released from each in kilojoules.
- 194Tl → ? + β+
- 171Pt → ? + α
- 214Pb → ? + β−
Q21.2.23
Using the information provided in Chapter 33, complete each reaction and calculate the amount of energy released from each in kilojoules per mole.
- \(_{91}^{234}\textrm{Pa}\rightarrow \,?+\,_{-1}^0\beta\)
- \(_{88}^{226}\textrm{Ra}\rightarrow \,?+\,_2^4\alpha\)
Q21.2.24
Using the information provided in Chapter 33, complete each reaction and then calculate the amount of energy released from each in kilojoules per mole.
- \(_{27}^{60}\textrm{Co}\rightarrow\,?+\,_{-1}^0\beta\) (The mass of cobalt-60 is 59.933817 amu.)
- technicium-94 (mass = 93.909657 amu) undergoing fission to produce chromium-52 and potassium-40
Q21.2.25
Using the information provided in Chapter 33, predict whether each reaction is favorable and the amount of energy released or required in megaelectronvolts and kilojoules per mole.
- the beta decay of bismuth-208 (mass = 207.979742 amu)
- the formation of lead-206 by alpha decay
Q21.2.26
Using the information provided, predict whether each reaction is favorable and the amount of energy released or required in megaelectronvolts and kilojoules per mole.
- alpha decay of oxygen-16
- alpha decay to produce chromium-52
Q21.2.27
Calculate the total nuclear binding energy (in megaelectronvolts) and the binding energy per nucleon for 87Sr if the measured mass of 87Sr is 86.908877 amu.
- the calculated mass
- the mass defect
- the nuclear binding energy
- the nuclear binding energy per nucleon
Q21.2.30
The experimentally determined mass of 29S is 28.996610 amu. Find each of the following.
- the calculated mass
- the mass defect
- the nuclear binding energy
- the nuclear binding energy per nucleon
Q21.2.31
Calculate the amount of energy that is released by the neutron-induced fission of 235U to give 141Ba, 92Kr (mass = 91.926156 amu), and three neutrons. Report your answer in electronvolts per atom and kilojoules per mole.
Q21.2.31
Calculate the amount of energy that is released by the neutron-induced fission of 235U to give 90Sr, 143Xe, and three neutrons. Report your answer in electronvolts per atom and kilojoules per mole.
Q21.2.33
Calculate the amount of energy released or required by the fusion of helium-4 to produce the unstable beryllium-8 (mass = 8.00530510 amu). Report your answer in kilojoules per mole. Do you expect this to be a spontaneous reaction?
Q21.2.34
Calculate the amount of energy released by the fusion of 6Li and deuterium to give two helium-4 nuclei. Express your answer in electronvolts per atom and kilojoules per mole.
Q21.2.35
How much energy is released by the fusion of two deuterium nuclei to give one tritium nucleus and one proton? How does this amount compare with the energy released by the fusion of a deuterium nucleus and a tritium nucleus, which is accompanied by ejection of a neutron? Express your answer in megaelectronvolts and kilojoules per mole. Pound for pound, which is a better choice for a fusion reactor fuel mixture?
Numerical Answers
1
- \(_{91}^{238}\textrm{Pa}\rightarrow\,_{92}^{238}\textrm{U}+\,_{-1}^0\beta\); −5.540 × 10−16 kJ
- \(_{87}^{216}\textrm{Fr}\rightarrow\,_{85}^{212}\textrm{At}+\,_{2}^4\alpha\); −1.470 × 10−15 kJ
- \(_{83}^{199}\textrm{Bi}\rightarrow\,_{82}^{199}\textrm{Pb}+\,_{+1}^0\beta\); −5.458 × 10−16 kJ
-
- \(_{91}^{234}\textrm{Pa}\rightarrow\,_{92}^{234}\textrm{U}+\,_{-1}^0\beta\); 2.118 × 108 kJ/mol
- \(_{88}^{226}\textrm{Ra}\rightarrow\,_{86}^{222}\textrm{Rn}+\,_{2}^4\alpha\); 4.700 × 108 kJ/mol
-
- The beta decay of bismuth-208 to polonium is endothermic (ΔE = 1.400 MeV/atom, 1.352 × 108 kJ/mol).
- The formation of lead-206 by alpha decay of polonium-210 is exothermic (ΔE = −5.405 MeV/atom, −5.218 × 108 kJ/mol).
- 757 MeV/atom, 8.70 MeV/nucleon
-
- 53.438245 amu
- 0.496955 amu
- 463 MeV/atom
- 8.74 MeV/nucleon
- −173 MeV/atom; 1.67 × 1010 kJ/mol
- ΔE = + 9.0 × 106 kJ/mol beryllium-8; no
- D–D fusion: ΔE = −4.03 MeV/tritium nucleus formed = −3.89 × 108 kJ/mol tritium; D–T fusion: ΔE = −17.6 MeV/tritium nucleus = −1.70 × 109 kJ/mol; D–T fusion
Q21.3.1
Why do scientists believe that hydrogen is the building block of all other elements? Why do scientists believe that helium-4 is the building block of the heavier elements?
Q21.3.2
How does a star produce such enormous amounts of heat and light? How are elements heavier than Ni formed?
Q21.3.3
Propose an explanation for the observation that elements with even atomic numbers are more abundant than elements with odd atomic numbers.
S21.3.3
The raw material for all elements with Z > 2 is helium (Z = 2), and fusion of helium nuclei will always produce nuclei with an even number of protons.
Q21.3.4
During the lifetime of a star, different reactions that form different elements are used to power the fusion furnace that keeps a star “lit.” Explain the different reactions that dominate in the different stages of a star’s life cycle and their effect on the temperature of the star.
Q21.3.5
A line in a popular song from the 1960s by Joni Mitchell stated, “We are stardust….” Does this statement have any merit or is it just poetic? Justify your answer.
Q21.3.6
If the laws of physics were different and the primary element in the universe were boron-11 (Z = 5), what would be the next four most abundant elements? Propose nuclear reactions for their formation.
Q21.3.7
Write a balanced nuclear reaction for the formation of each isotope.
- 27Al from two 12C nuclei
- 9Be from two 4He nuclei
Q21.3.8
At the end of a star’s life cycle, it can collapse, resulting in a supernova explosion that leads to the formation of heavy elements by multiple neutron-capture events. Write a balanced nuclear reaction for the formation of each isotope during such an explosion.
- 106Pd from nickel-58
- selenium-79 from iron-56
Q21.3.9
When a star reaches middle age, helium-4 is converted to short-lived beryllium-8 (mass = 8.00530510 amu), which reacts with another helium-4 to produce carbon-12. How much energy is released in each reaction (in megaelectronvolts)? How many atoms of helium must be “burned” in this process to produce the same amount of energy obtained from the fusion of 1 mol of hydrogen atoms to give deuterium?
Q21.4.1
What do chemists mean by the half-life of a reaction?
Q21.4.2
If a sample of one isotope undergoes more disintegrations per second than the same number of atoms of another isotope, how do their half-lives compare?
Q21.4.3
Half-lives for the reaction A + B → C were calculated at three values of [A]0, and [B] was the same in all cases. The data are listed in the following table:
[A]0 (M) |
t½ (s) |
0.50 |
420 |
0.75 |
280 |
1.0 |
210 |
Does this reaction follow first-order kinetics? On what do you base your answer?
S21.4.3
- No; the reaction is second order in A because the half-life decreases with increasing reactant concentration according to t1/2 = 1/k[A0].
Q21.4.4
Ethyl-2-nitrobenzoate (NO2C6H4CO2C2H5) hydrolyzes under basic conditions. A plot of [NO2C6H4CO2C2H5] versus t was used to calculate t½, with the following results:
[NO2C6H4CO2C2H5] (M/cm3) |
t½ (s) |
0.050 |
240 |
0.040 |
300 |
0.030 |
400 |
Is this a first-order reaction? Explain your reasoning.
Q21.4.5
Azomethane (CH3N2CH3) decomposes at 600 K to C2H6 and N2. The decomposition is first order in azomethane. Calculate t½ from the data in the following table:
Time (s) |
\(P_{\large{\mathrm{CH_3N_2CH_3}}}\) (atm)
|
0 |
8.2 × 10−2 |
2000 |
3.99 × 10−2 |
4000 |
1.94 × 10−2 |
How long will it take for the decomposition to be 99.9% complete?
S21.4.5
t1/2 = 1.92 × 103 s or 1920 s; 19100 s or 5.32 hrs.
Q21.4.6
The first-order decomposition of hydrogen peroxide has a half-life of 10.7 h at 20°C. What is the rate constant (expressed in s−1) for this reaction? If you started with a solution that was 7.5 × 10−3 M H2O2, what would be the initial rate of decomposition (M/s)? What would be the concentration of H2O2 after 3.3 h?