3.2: Nomenclature
7
Harper College Chemistry Department
Nomenclature, a collection of rules for naming things, is important in science and in many other situations. This module describes an approach that is used to name simple ionic and molecular compounds, such as NaCl, CaCO 3 , and N 2 O 4 . The simplest of these are binary compounds, those containing only two elements, but we will also consider how to name ionic compounds containing polyatomic ions and acids (subsequent chapters in this text will focus on these compounds in great detail). We will limit our attention here to inorganic compounds, compounds that are composed principally of elements other than carbon, and will follow the nomenclature guidelines proposed by the International Union of Pure and Applied Chemistry (IUPAC). The rules for organic compounds, in which carbon is the principle element, will be treated in a later chapter on organic chemistry.
Naming Ionic Compounds
To name an inorganic compound, we need to consider the answers to several questions. First, is the compound ionic or molecular? If the compound is ionic, does the metal form ions of only one type (fixed charge) or more than one type (variable charge)? Are the ions monatomic or polyatomic? If the compound is molecular, does it contain hydrogen? If so, does it also contain oxygen? From the answers we derive, we place the compound in an appropriate category and then name it accordingly.
Compounds Containing Only Monatomic Ions
The name of a binary compound containing monatomic ions consists of the name of the cation (the name of the metal) followed by the name of the anion (the name of the nonmetallic element with its ending replaced by the suffix – ide ). Some examples are given in Table 1 .
| Names of Some Ionic Compounds | |
|---|---|
| NaCl, sodium chloride | Na 2 O, sodium oxide |
| KBr, potassium bromide | CdS, cadmium sulfide |
| CaI 2 , calcium iodide | Mg 3 N 2 , magnesium nitride |
| CsF, cesium fluoride | Ca 3 P 2 , calcium phosphide |
| LiCl, lithium chloride | Al 4 C 3 , aluminum carbide |
Compounds Containing Polyatomic Ions
Compounds containing polyatomic ions (Table 2a) are named similarly to those containing only monatomic ions, i.e., by naming first the cation and then the anion. Examples are shown in Table 2 .
| Table 2a: Some Common Polyatomic Ions | ||
| Ammonium NH 4 + | Hypochlorite ClO – | Nitrite NO 2 – |
| Acetate C 2 H 3 O 2 – | Hydroxide OH – | Phosphate PO 4 3- |
|
Bicarbonate HCO
3
–
Hydrogen carbonate |
Hydrogen phosphate HPO 4 2- | Phosphite PO 3 3 - |
| Carbonate CO 3 2 - | Hydrogen sulfate HSO 4 – | Sulfate SO 4 2- |
| Chlorate ClO 3 – | Nitrate NO 3 – | Sulfite SO 3 2- |
| Names of Some Polyatomic Ionic Compounds | ||
|---|---|---|
| KC 2 H 3 O 2 , potassium acetate | NH 4 Cl, ammonium chloride | |
| NaHCO 3 , sodium bicarbonate | CaSO 4 , calcium sulfate | |
| Al 2 (CO 3 ) 3 , aluminum carbonate | Mg 3 (PO 4 ) 2 , magnesium phosphate |
Every day you encounter and use a large number of ionic compounds. Some of these compounds, where they are found, and what they are used for are listed in Table 3 . Look at the label or ingredients list on the various products that you use during the next few days, and see if you run into any of those in this table, or find other ionic compounds that you could now name or write as a formula.
| Everyday Ionic Compounds | |
|---|---|
| Ionic Compound | Use |
| NaCl, sodium chloride | ordinary table salt |
| KI, potassium iodide | added to “iodized” salt for thyroid health |
| NaF, sodium fluoride | ingredient in toothpaste |
| NaHCO 3 , sodium bicarbonate | baking soda; used in cooking (and as antacid) |
| Na 2 CO 3 , sodium carbonate | washing soda; used in cleaning agents |
| NaOCl, sodium hypochlorite | active ingredient in household bleach |
| CaCO 3 calcium carbonate | ingredient in antacids |
| Mg(OH) 2 , magnesium hydroxide | ingredient in antacids |
| Al(OH) 3 , aluminum hydroxide | ingredient in antacids |
| NaOH, sodium hydroxide | lye; used as drain cleaner |
| K 3 PO 4 , potassium phosphate | food additive (many purposes) |
| MgSO 4 , magnesium sulfate | added to purified water |
| Na 2 HPO 4 , sodium hydrogen phosphate | anti-caking agent; used in powdered products |
| Na 2 SO 3 , sodium sulfite | preservative |
Compounds Containing a Metal Ion with a Variable Charge
Most of the transition metals can form two or more cations with different charges. Compounds of these metals with nonmetals are named with the same method as compounds in the first category, except the charge of the metal ion is specified by a Roman numeral in parentheses after the name of the metal. The charge of the metal ion is determined from the formula of the compound and the charge of the anion. For example, consider binary ionic compounds of iron and chlorine. Iron typically exhibits a charge of either 2+ or 3+ (see [link] ), and the two corresponding compound formulas are FeCl 2 and FeCl 3 . The simplest name, “iron chloride,” will, in this case, be ambiguous, as it does not distinguish between these two compounds. In cases like this, the charge of the metal ion is included as a Roman numeral in parentheses immediately following the metal name. These two compounds are then unambiguously named iron(II) chloride and iron(III) chloride, respectively. Other examples are provided in Table 4 .
| Names of Some Transition Metal Ionic Compounds | |
|---|---|
| Transition Metal Ionic Compound | Name |
| FeCl 3 | iron(III) chloride |
| Hg 2 O | mercury(I) oxide |
| HgO | mercury(II) oxide |
| Cu 3 (PO 4 ) 2 | copper(II) phosphate |
Out-of-date nomenclature used the suffixes – ic and – ous to designate metals with higher and lower charges, respectively: Iron(III) chloride, FeCl 3 , was previously called ferric chloride, and iron(II) chloride, FeCl 2 , was known as ferrous chloride. Though this naming convention has been largely abandoned by the scientific community, it remains in use by some segments of industry. For example, you may see the words stannous fluoride on a tube of toothpaste. This represents the formula SnF 2 , which is more properly named tin(II) fluoride. The other fluoride of tin is SnF 4 , which was previously called stannic fluoride but is now named tin(IV) fluoride.
Naming Ionic Compounds: Name the following ionic compounds, which contain a metal that can have more than one positive charge:
(a) Fe 2 S 3
(b) CuSe
(c) GaN
(d) CrCl 3
(e) Ti 2 (SO 4 ) 3
Solution: The anions in these compounds have a fixed negative charge (S 2− , Se 2− , N 3− , Cl − , and SO 4 2- ), and the compounds must be neutral. Because the total number of positive charges in each compound must equal the total number of negative charges, the positive ions must be Fe 3+ , Cu 2+ , Ga 3+ , Cr 3+ , and Ti 3+ . These charges are used in the names of the metal ions:
(a) iron(III) sulfide
(b) copper(II) selenide
(c) gallium(III) nitride
(d) chromium(III) chloride
(e) titanium(III) sulfate
Check Your Learning
Write the formulas of the following ionic compounds:
(a) chromium(III) phosphide
(b) mercury(II) sulfide
(c) manganese(II) phosphate
(d) copper(I) oxide
(e) chromium(VI) fluoride
(a) CrP; (b) HgS; (c) Mn 3 (PO 4 ) 2 ; (d) Cu 2 O; (e) CrF 6
Molecular (Covalent) Compounds
The bonding characteristics of molecular compounds are different from ionic compounds and they are named using a different system as well. The charges of cations and anions dictate their ratios in ionic compounds, so specifying the names of the ions provides sufficient information to determine chemical formulas. However, because covalent bonding allows for significant variation in the combination ratios of the atoms in a molecule, the names for molecular compounds must explicitly identify these ratios. Remember ions are only present in ionic compounds.
Compounds Composed of Two Nonmetal Elements
When two nonmetallic elements form a molecular compound, several ration combinations are often possible. For example, carbon and oxygen can form the compounds CO and CO 2 . Since these are different substances with different properties, they cannot both have the same name (they cannot both be called carbon oxide). To deal with this situation, we use a naming method that is somewhat similar to that used for ionic compounds, but with added prefixes to specify the numbers of atoms of each element. The name of the more metallic element (the one farther to the left and/or bottom of the periodic table) is first, followed by the name of the more nonmetallic element (the one farther to the right and/or top) with its ending changed to the suffix – ide . The numbers of atoms of each element are designated by the Greek prefixes shown in Table 5 .
| Table 5: Nomenclature Prefixes | ||||
|---|---|---|---|---|
| Number | Prefix | Number | Prefix | |
| 1 (sometimes omitted) | mono- | 6 | hexa- | |
| 2 | di- | 7 | hepta- | |
| 3 | tri- | 8 | octa- | |
| 4 | tetra- | 9 | nona- | |
| 5 | penta- | 10 | deca- |
When only one atom of the first element is present, the prefix mono – is usually deleted from that part. Thus, CO is named carbon monoxide and CO 2 is called carbon dioxide. When two vowels are adjacent, the “ a” in the Greek prefix is usually dropped. Some other examples are shown in Table 6 .
| Table 6: Names of Some Molecular Compounds Composed of Two Elements | ||||
|---|---|---|---|---|
| Compound | Name | Compound | Name | |
| SO 2 | sulfur dioxide | BCl 3 | boron trichloride | |
| SO 3 | sulfur trioxide | SF 6 | sulfur hexafluoride | |
| NO 2 | nitrogen dioxide | PF 5 | phosphorus pentafluoride | |
| N 2 O 4 | dinitrogen tetroxide | P 4 O 10 | tetraphosphorus decaoxide | |
| N 2 O 5 | dinitrogen pentoxide | IF 7 | iodine heptafluoride |
There are a few common names that you will encounter as you continue your study of chemistry. For example, although NO is often called nitric oxide, its proper name is nitrogen monoxide. Similarly, N 2 O is known as nitrous oxide even though our rules would specify the name dinitrogen monoxide. (And H 2 O is usually called water, not dihydrogen monoxide.)
Naming Covalent Compounds: Name the following covalent compounds:
(a) SF 6
(b) N 2 O 3
(c) Cl 2 O 7
(d) P 4 O 6
Solution: Because these compounds consist solely of nonmetals, we use prefixes to designate the number of atoms of each element:
(a) sulfur hexafluoride
(b) dinitrogen trioxide
(c) dichlor ine heptoxide
(d) tetraphosphorus hexoxide
Check Your Learning Write the formulas for the following compounds:
(a) phosphorus pentachloride
(b) dinitrogen monoxide
(c) iodine heptafluoride
(d) carbon tetrachloride
(a) PCl 5 ; (b) N 2 O; (c) IF 7 ; (d) CCl 4
The following website provides practice with naming chemical compounds and writing chemical formulas. You can choose binary, polyatomic, and variable charge ionic compounds, as well as molecular compounds.
Binary Acids
Some compounds containing hydrogen are members of an important class of substances known as acids. The chemistry of these compounds is explored in more detail in later chapters of this text, but for now, it will suffice to note that many acids release hydrogen ions, H + , when dissolved in water. To denote this distinct chemical property, a mixture of water with an acid is given a name derived from the compound’s name. If the compound is a binary acid (comprised of hydrogen and one other nonmetallic element):
- The word “hydrogen” is changed to the prefix hydro-
- The other nonmetallic element name is modified by adding the suffix – ic
- The word “acid” is added as a second word
For example, when the gas HCl (hydrogen chloride) is dissolved in water, the solution is called hydrochloric acid . Several other examples of this nomenclature are shown in Table 7 .
| Table 7: Names of Some Simple Acids | |
|---|---|
| Name of Gas | Name of Acid |
| HF( g ), hydrogen fluoride | HF( aq ), hydrofluoric acid |
| HCl( g ), hydrogen chloride | HCl( aq ), hydrochloric acid |
| HBr( g ), hydrogen bromide | HBr( aq ), hydrobromic acid |
| HI( g ), hydrogen iodide | HI( aq ), hydroiodic acid |
| H 2 S( g ), hydrogen sulfide | H 2 S( aq ), hydrosulfuric acid |
Oxyacids
Many compounds containing three or more elements (such as organic compounds or coordination compounds) are subject to specialized nomenclature rules that you will learn later. However, we will briefly discuss the important compounds known as oxyacids, compounds that contain hydrogen, oxygen, at least one other element and are bonded in such a way as to impart acidic properties to the compound (you will learn the details of this in a later chapter). Typical oxyacids consist of hydrogen combined with a polyatomic, oxygen-containing ion. To name oxyacids:
- Omit “hydrogen”
- Start with the root name of the anion
- Replace – ate with – ic , or – ite with – ous
- Add “acid”
For example, consider H 2 CO 3 (which you might be tempted to call “hydrogen carbonate”). To name this correctly, “hydrogen” is omitted; the – ate of carbonate is replace with – ic ; and acid is added—so its name is carbonic acid. Other examples are given in Table 8 . There are some exceptions to the general naming method (e.g., H 2 SO 4 is called sulfuric acid, not sulfic acid, and H 2 SO 3 is sulfurous, not sulfous, acid).
| Table 8: Names of Common Oxyacids | ||
|---|---|---|
| Formula | Anion Name | Acid Name |
| HC 2 H 3 O 2 | acetate | acetic acid |
| HNO 3 | nitrate | nitric acid |
| HNO 2 | nitrite | nitrous acid |
| HClO 4 | perchlorate | perchloric acid |
| H 2 CO 3 | carbonate | carbonic acid |
| H 2 SO 4 | sulfate | sulfuric acid |
| H 2 SO 3 | sulfite | sulfurous acid |
| H 3 PO 4 | phosphate | phosphoric acid |
In case you are wondering
ERIN BROKOVICH AND CHROMIUM CONTAMINATIONIn the early 1990s, legal file clerk Erin Brockovich ( Figure 1 ) discovered a high rate of serious illnesses in the small town of Hinckley, California. Her investigation eventually linked the illnesses to groundwater contaminated by Cr(VI) used by Pacific Gas & Electric (PG&E) to fight corrosion in a nearby natural gas pipeline. As dramatized in the film Erin Brokovich (for which Julia Roberts won an Oscar), Erin and lawyer Edward Masry sued PG&E for contaminating the water near Hinckley in 1993. The settlement they won in 1996—$333 million—was the largest amount ever awarded for a direct-action lawsuit in the US at that time.
Chromium compounds are widely used in industry, such as for chrome plating, in dye-making, as preservatives, and to prevent corrosion in cooling tower water, as occurred near Hinckley. In the environment, chromium exists primarily in either the Cr(III) or Cr(VI) forms. Cr(III), an ingredient of many vitamin and nutritional supplements, forms compounds that are not very soluble in water, and it has low toxicity. But Cr(VI) is much more toxic and forms compounds that are reasonably soluble in water. Exposure to small amounts of Cr(VI) can lead to damage of the respiratory, gastrointestinal, and immune systems, as well as the kidneys, liver, blood, and skin.
Despite cleanup efforts, Cr(VI) groundwater contamination remains a problem in Hinckley and other locations across the globe. A 2010 study by the Environmental Working Group found that of 35 US cities tested, 31 had higher levels of Cr(VI) in their tap water than the public health goal of 0.02 parts per billion set by the California Environmental Protection Agency.
Key Concepts and Summary
Chemists use nomenclature rules to clearly name compounds. Ionic and molecular compounds are named using somewhat-different methods. Binary ionic compounds typically consist of a metal and a nonmetal. The name of the metal is written first, followed by the name of the nonmetal with its ending changed to –
ide
. For example, K
2
O is called potassium oxide. If the metal can form ions with different charges, a Roman numeral in parentheses follows the name of the metal to specify its charge. Thus, FeCl
2
is iron(II) chloride and FeCl
3
is iron(III) chloride. Some compounds contain polyatomic ions; the names of common polyatomic ions should be memorized. Molecular compounds can form compounds with different ratios of their elements, so prefixes are used to specify the numbers of atoms of each element in a molecule of the compound. Examples include SF
6
, sulfur hexafluoride, and N
2
O
4
, dinitrogen tetroxide. Acids are an important class of compounds containing hydrogen and having special nomenclature rules. Binary acids are named using the prefix
hydro-
, changing the
–
ide
suffix to –
ic
, and adding “
acid
;” HCl is hydrochloric acid. Oxyacids are named by changing the ending of the anion (–
ate
to –
ic
and –
ite
to –
ous
) and adding “acid;” H
2
CO
3
is carbonic acid.
Chemistry End of Chapter Exercises
1. Name the following compounds:
(a) CsCl
(b) BaO
(c) K 2 S
(d) BeCl 2
(e) HBr
(f) AlF 3
2. Name the following compounds:
(a) NaF
(b) Rb 2 O
(c) BCl 3
(d) H 2 Se
(e) P 4 O 6
(f) ICl 3
3. Write the formulas of the following compounds:
(a) rubidium bromide
(b) magnesium selenide
(c) sodium oxide
(d) calcium chloride
(e) hydrogen fluoride
(f) gallium phosphide
(g) aluminum bromide
(h) ammonium sulfate
4. Write the formulas of the following compounds:
(a) lithium carbonate
(b) sodium perchlorate
(c) barium hydroxide
(d) ammonium carbonate
(e) sulfuric acid
(f) calcium acetate
(g) magnesium phosphate
(h) sodium sulfite
5. Write the formulas of the following compounds:
(a) chlorine dioxide
(b) dinitrogen tetraoxide
(c) potassium phosphide
(d) silver(I) sulfide
(e) aluminum nitride
(f) silicon dioxide
6. Write the formulas of the following compounds:
(a) barium chloride
(b) magnesium nitride
(c) sulfur dioxide
(d) nitrogen trichloride
(e) dinitrogen trioxide
(f) tin(IV) chloride
7. Each of the following compounds contains a metal that can exhibit more than one ionic charge. Name these compounds:
(a) Cr 2 O 3
(b) FeCl 2
(c) CrO 3
(d) TiCl 4
(e) CoO
(f) MoS 2
8. Each of the following compounds contains a metal that can exhibit more than one ionic charge. Name these compounds:
(a) NiCO 3
(b) MoO 3
(c) Co(NO 3 ) 2
(d) V 2 O 5
(e) MnO 2
(f) Fe 2 O 3
9. The following ionic compounds are found in common household products. Write the formulas for each compound:
(a) potassium phosphate
(b) copper(II) sulfate
(c) calcium chloride
(d) titanium dioxide
(e) ammonium nitrate
(f) sodium bisulfate (the common name for sodium hydrogen sulfate)
10. The following ionic compounds are found in common household products. Name each of the compounds:
(a) Ca(H 2 PO 4 ) 2
(b) FeSO 4
(c) CaCO 3
(d) MgO
(e) NaNO 2
(f) KI
11. What are the IUPAC names of the following compounds?
(a) manganese dioxide
(b) mercurous chloride (Hg 2 Cl 2 )
(c) ferric nitrate [Fe(NO 3 ) 3 ]
(d) titanium tetrachloride
(e) cupric bromide (CuBr 2 )
Glossary
- binary acid
- compound that contains hydrogen and one other element, bonded in a way that imparts acidic properties to the compound (ability to release H + ions) when dissolved in water
- binary compound
- compound containing two different elements
- nomenclature
- system of rules for naming objects of interest
- oxyacid
- compound that contains hydrogen, oxygen, and one other element, bonded in a way that imparts acidic properties to the compound (ability to release H + ions when dissolved in water)