Skip to main content
Chemistry LibreTexts

17.13: Heat of Solution

[ "article:topic", "showtoc:no" ]
  • Page ID
    53881
  • When preparing dilutions of concentrated sulfuric acid, the directions usually call for adding the acid slowly to water with a lot of stirring. When this acid is mixed with water, a great deal of heat is released in the dissolving process. If water were added to acid, the water would quickly heat and splatter, causing harm to the person making the solution.

    Heat of Solution

    Enthalpy changes also occur when a solute undergoes the physical process of dissolving into a solvent. Hot packs and cold packs (see figure below) use this property. Many hot packs use calcium chloride, which releases heat when it dissolves according to the equation below.

    \[\ce{CaCl_2} \left (s \right) \rightarrow \ce{Ca^{2+}} \left( aq \right) + 2 \ce{Cl^-} \left( aq \right) + 82.8 \: \text{kJ}\]

    The molar heat of solution \(\left( \Delta H_\text{soln} \right)\) of a substance is the heat absorbed or released when one mole of the substance is dissolved in water. For calcium chloride, \(\Delta H_\text{soln} = -82.8 \: \text{kJ/mol}\).

    Figure 17.13.1: Chemical hot packs and cold packs work because of the heats of solution of the chemicals inside them. When the bag is squeezed, an inner pouch bursts, allowing the chemical to dissolve in water. Heat is released in the hot pack and absorbed in the cold pack.

    Many cold packs use ammonium nitrate, which absorbs heat from the surroundings when it dissolves.

    \[\ce{NH_4NO_3} \left( s \right) + 25.7 \: \text{kJ} \rightarrow \ce{NH_4^+} \left( aq \right) + \ce{NO_3^-} \left( aq \right)\]

    Cold packs are typically used to treat muscle strains and sore joints. The cold pack is activated and applied to the affected area. As the ammonium nitrate dissolves, it absorbs heat from the body and helps to limit swelling. For ammonium nitrate, \(\Delta H_\text{soln} = 25.7 \: \text{kJ/mol}\).

    Example 17.13.1

    The molar heat of solution, \(\Delta H_\text{soln}\), of \(\ce{NaOH}\) is \(-44.51 \: \text{kJ/mol}\). In a certain experiment, \(50.0 \: \text{g}\) of \(\ce{NaOH}\) is completely dissolved in \(1.000 \: \text{L}\) of \(20.0^\text{o} \text{C}\) water in a foam cup calorimeter. Assuming no heat loss, calculate the final temperature of the water.

    Solution:

    Step 1: List the known quantities and plan the problem.

    Known

    • Mass \(\ce{NaOH} = 50.0 \: \text{g}\)
    • Molar mass \(\ce{NaOH} = 40.00 \: \text{g/mol}\)
    • \(\Delta H_\text{soln} \: \left( \ce{NaOH} \right) = -44.51 \: \text{kJ/mol}\)
    • Mass \(\ce{H_2O} = 1.000 \: \text{kg} = 1000. \: \text{g}\) (assumes density \(= 1.00 \: \text{g/mL}\))
    • \(T_\text{initial} \: \left( \ce{H_2O} \right) = 20.0^\text{o} \text{C}\)
    • \(c_p \: \left( \ce{H_2O} \right) = 4.18 \: \text{J/g}^\text{o} \text{C}\)

    Unknown

    • \(T_\text{final}\) of \(\ce{H_2O} = ? \: ^\text{o} \text{C}\)

    This is a multiple-step problem: 1) the grams \(\ce{NaOH}\) is converted to moles; 2) the moles is multiplied by the molar heat of solution; 3) the joules of heat released in the dissolving process is used with the specific heat equation and the total mass of the solution to calculate the \(\Delta T\); 4) the \(T_\text{final}\) is determined from \(\Delta T\).

    Step 2: Solve.

    \[50.0 \: \text{g} \: \ce{NaOH} \times \frac{1 \: \text{mol} \: \ce{NaOH}}{40.00 \: \text{g} \: \ce{NaOH}} \times \frac{-44.51 \: \text{kJ}}{1 \: \text{mol} \: \ce{NaOH}} \times \frac{1000 \: \text{J}}{1 \: \text{kJ}} = -5.56 \times 10^4 \: \text{J}\]

    \[\Delta T = \frac{\Delta H}{c_p \times m} = \frac{-5.56 \times 10^4 \: \text{J}}{4.18 \: \text{J/g}^\text{o} \text{C} \times 1050 \: \text{g}} = 13.2^\text{o} \text{C}\]

    \[T_\text{final} = 20.0^\text{o} \text{C} + 13.2^\text{o} \text{C} = 33.2^\text{o} \text{C}\]

    Step 3: Think about your result.

    The dissolving process releases a large amount of heat, which causes the temperature of the solution to rise. Care must be taken when preparing concentrated solutions of sodium hydroxide because of the large amounts of heat released.

    Summary

    • Molar heat of solution is defined.
    • Sample calculations using molar heat of solution are given.

    Contributors

    • CK-12 Foundation by Sharon Bewick, Richard Parsons, Therese Forsythe, Shonna Robinson, and Jean Dupon.