# 9.6: Quantum-Mechanical Orbitals and Electron Configurations

- Page ID
- 98052

Skills to Develop

- Represent the organization of electrons by an electron configuration and orbital diagram.

The flight path of a commercial airliner is carefully regulated by the Federal Aviation Administration. Each airplane must maintain a distance of five miles from another plane flying at the same altitude and 2,000 feet above and below another aircraft (1,000 feet if the altitude is less than 29,000 feet). So, each aircraft only has certain positions it is allowed to maintain while it flies. As we explore quantum mechanics, we see that electrons have similar restrictions on their locations.

### Orbitals

We can apply our knowledge of quantum numbers to describe the arrangement of electrons for a given atom. We do this with something called **electron configurations**. They are effectively a map of the electrons for a given atom. We look at the four quantum numbers for a given electron and then assign that electron to a specific orbitals below.

#### \(s\) Orbitals

For any value of \(n\), a value of \(l=0\) places that electron in an **\(s\) orbital**. This orbital is spherical in shape:

**Figure \(\PageIndex{1}\): **\(s\) orbitals have no orientational preference and resemble spheres.

#### \(p\) Orbitals

For the table below, we see that we can have three possible orbitals when \(l=1\). These are designated as **\(p\) orbitals** and have dumbbell shapes. Each of the \(p\) orbitals has a different orientation in three-dimensional space.

**Figure \(\PageIndex{2}\): **\(p\) orbitals have an orientational preference and resemble dumbells.

#### \(d\) Orbitals

When \(l=2\), \(m_l\) values can be \(-2, \: -1, \: 0, \: +1, \: +2\) for a total of five **\(d\) orbitals**. Note that all five of the orbitals have specific three-dimensional orientations.

**Figure \(\PageIndex{3}\): **\(d\) orbitals have an orientational preference and exhibit complex structures.

#### \(f\) Orbitals

The most complex set of orbitals are the **\(f\) orbitals**. When \(l=3\), \(m_l\) values can be \(-3, \: -2, \: -1, \: 0, \: +1, \: +2, \: +3\) for a total of seven different orbital shapes. Again, note the specific orientations of the different \(f\) orbitals.

**Figure \(\PageIndex{4}\): **\(d\) orbitals have an orientational preference and exhibit quite complex structures.

Orbitals that have the same value of the principal quantum number form a **shell**. Orbitals within a shell are divided into **subshells** that have the same value of the angular quantum number. Some of the allowed combinations of quantum numbers are compared in Table\(\PageIndex{1}\).

Principal Quantum Number \(\left( n \right)\) |
Allowable Sublevels |
Number of Orbitals per Sublevel |
Number of Orbitals per Principal Energy Level |
Number of Electrons per Sublevel |
Number of Electrons per Principal Energy Level |
---|---|---|---|---|---|

1 |
\(s\) | 1 | 1 | 2 | 2 |

2 |
\(s\) | 1 | 4 | 2 | 8 |

\(p\) | 3 | 6 | |||

3 |
\(s\) | 1 | 9 | 2 | 18 |

\(p\) | 3 | 6 | |||

\(d\) | 5 | 10 | |||

4 |
\(s\) | 1 | 16 | 2 | 32 |

\(p\) | 3 | 6 | |||

\(d\) | 5 | 10 | |||

\(f\) | 7 | 14 |

## Electron Configurations

Can you name one thing that easily distinguishes you from the rest of the world? And we're not talking about DNA - that's a little expensive to sequence. For many people, it is their email address. My email address allows people all over the world to contact me. It does not belong to anyone else, but serves to identify me. Electrons also have a unique set of identifiers in the quantum numbers that describe their location and spin. Chemists use an **electronic configuration** to represent the organization of electrons in shells and subshells in an atom. An electron configuration simply lists the shell and subshell labels, with a right superscript giving the number of electrons in that subshell. The shells and subshells are listed in the order of filling.

For example, an H atom has a single electron in the 1s subshell. Its electron configuration is

H: 1s^{1}

He has two electrons in the 1s subshell. Its electron configuration is

He: 1s^{2}

The three electrons for Li are arranged in the 1s subshell (two electrons) and the 2s subshell (one electron). The electron configuration of Li is

Li: 1s^{2}2s^{1}

Be has four electrons, two in the 1s subshell and two in the 2s subshell. Its electron configuration is

Be: 1s^{2}2s^{2}

Now that the 2s subshell is filled, electrons in larger atoms must go into the 2p subshell, which can hold a maximum of six electrons. The next six elements progressively fill up the 2p subshell:

- B: 1s
^{2}2s^{2}2p^{1} - C: 1s
^{2}2s^{2}2p^{2} - N: 1s
^{2}2s^{2}2p^{3} - O: 1s
^{2}2s^{2}2p^{4} - F: 1s
^{2}2s^{2}2p^{5} - Ne: 1s
^{2}2s^{2}2p^{6}

Now that the 2p subshell is filled (all possible subshells in the n = 2 shell), the next electron for the next-larger atom must go into the n = 3 shell, s subshell.

### Second Period Elements

Periods refer to the horizontal rows of the periodic table. Looking at a periodic table you will see that the first period contains only the elements hydrogen and helium. This is because the first principal energy level consists of only the \(s\) sublevel and so only two electrons are required in order to fill the entire principal energy level. Each time a new principal energy level begins, as with the third element lithium, a new period is started on the periodic table. As one moves across the second period, electrons are successively added. With beryllium \(\left( Z=4 \right)\), the \(2s\) sublevel is complete and the \(2p\) sublevel begins with boron \(\left( Z=5 \right)\). Since there are three \(2p\) orbitals and each orbital holds two electrons, the \(2p\) sublevel is filled after six elements. Table \(\PageIndex{1}\) shows the electron configurations of the elements in the second period.

Element Name |
Symbol |
Atomic Number |
Electron Configuration |
---|---|---|---|

Lithium | \(\ce{Li}\) | 3 | \(1s^2 2s^1\) |

Beryllium | \(\ce{Be}\) | 4 | \(1s^2 2s^2\) |

Boron | \(\ce{B}\) | 5 | \(1s^2 2s^2 2p^1\) |

Carbon | \(\ce{C}\) | 6 | \(1s^2 2s^2 2p^2\) |

Nitrogen | \(\ce{N}\) | 7 | \(1s^2 2s^2 2p^3\) |

Oxygen | \(\ce{O}\) | 8 | \(1s^2 2s^2 2p^4\) |

Fluorine | \(\ce{F}\) | 9 | \(1s^2 2s^2 2p^5\) |

Neon | \(\ce{Ne}\) | 10 | \(1s^2 2s^2 2p^6\) |

Aufbau Principle

Construction of a building begins at the bottom. The foundation is laid and the building goes up step by step. You obviously cannot start with the roof since there is no place to hang it. The building goes from the lowest level to the highest level in a systematic way. In order to create ground state electron configurations for any element, it is necessary to know the way in which the atomic sublevels are organized in order of increasing energy. Figure \(\PageIndex{5}\) shows the order of increasing energy of the sublevels.

*Figure \(\PageIndex{5}\):* *Electrons are added to atomic orbitals in order from low energy (bottom of the graph) to high (top of the graph) according to the Aufbau principle. Principle energy levels are color coded, while sublevels are grouped together and each circle represents an orbital capable of holding two electrons.*

The lowest energy sublevel is always the \(1s\) sublevel, which consists of one orbital. The single electron of the hydrogen atom will occupy the \(1s\) orbital when the atom is in its ground state. As we proceed with atoms with multiple electrons, those electrons are added to the next lowest sublevel: \(2s\), \(2p\), \(3s\), and so on. The **Aufbau principle** states that an electron occupies orbitals in order from lowest energy to highest. The Aufbau (German: "building up, construction") principle is sometimes referred to as the "building up" principle. It is worth noting that in reality atoms are not built by adding protons and electrons one at a time and that this method is merely an aid for us to understand the end result.

As seen in the figure above, the energies of the sublevels in different principal energy levels eventually begin to overlap. After the \(3p\) sublevel, it would seem logical that the \(3d\) sublevel should be the next lowest in energy. However, the \(4s\) sublevel is slightly lower in energy than the \(3d\) sublevel and thus fills first. Following the filling of the \(3d\) sublevel is the \(4p\), then the \(5s\) and the \(4d\). Note that the \(4f\) sublevel does not fill until just after the \(6s\) sublevel. Figure \(\PageIndex{6}\) is a useful and simple aid for keeping track of the order of fill of the atomic sublevels.

**Figure \(\PageIndex{6}\):***The Aufbau principle is illustrated in the diagram by following each red arrow in order from top to bottom: \(1s\), \(2s\), \(2p\), \(3s\), etc.*

Example \(\PageIndex{1}\): Nitrogen Atoms

Nitrogen has 7 electrons. Write the electron configuration for nitrogen.

**Solution**:

Take a close look at Figure 9.6.5, and use it to figure out how many electrons go into each sublevel, and also the order in which the different sublevels get filled.

1. Begin by filling up the 1*s* sublevel. **This gives 1 s^{2}**. Now all of the orbitals in the red

*n*= 1 block are filled.

- Since we used 2 electrons, there are 7 − 2 =
**5 electrons left**

2. Next, fill the 2*s* sublevel. This gives **1 s^{2}2s^{2}**. Now all of the orbitals in the

*s*sublevel of the orange

*n*= 2 block are filled.

- Since we used another 2 electrons, there are 5 − 2 =
**3 electrons left**

3. Notice that we haven't filled the entire *n* = 2 block yet… there are still the *p* orbitals!

- The final 3 electrons go into the 2
*p*sublevel. This gives**1***s*^{2}2*s*^{2}2*p*^{3}

The overall electron configuration is: **1 s^{2}2s^{2}2p^{3}**.

Example \(\PageIndex{2}\): Potassium Atoms

Potassium has 19 electrons. Write the electron configuration code for potassium.

**SOLUTION**

This time, take a close look at Figure 9.6.5.

1. Begin by filling up the 1*s* sublevel. **This gives 1 s^{2}**. Now the

*n*= 1 level is filled.

- Since we used 2 electrons, there are 19 − 2 =
**17 electrons left**

2. Next, fill the 2*s* sublevel. **This gives 1 s^{2}2s^{2}**

- Since we used another 2 electrons, there are 17 − 2 =
**15 electrons left**

3. Next, fill the 2*p* sublevel. T**his gives 1 s^{2}2s^{2}2p^{6}.** Now the

*n*= 2 level is filled.

- Since we used another 6 electrons, there are 15 − 6 =
**9 electrons left**

4. Next, fill the 3*s* sublevel. **This gives 1s^{2}2s^{2}2p^{6}3s^{2}**

- Since we used another 2 electrons, there are 9 − 2 =
__7 electrons left__

5. Next, fill the 3*p* sublevel. **This gives 1 s^{2}2s^{2}2p^{6}3s^{2}3p^{6}**

- Since we used another 6 electrons, there are 7 − 6 =
**1 electron left**

**Here's where we have to be careful – right after 3 p^{6}!!**

**Remember, 4***s*comes before 3*d*!

6. The final electron goes into the 4*s* sublevel. **This gives 1 s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{1}**

The overall electron configuration is:** 1 s^{2}2s^{2}2p^{6}3s^{2}3p^{6}4s^{1}.**

Exercise \(\PageIndex{1}\): Magnesium and Sodium Atoms

What is the electron configuration for Mg and Na?

**Answer Mg**- Mg: 1s
^{2}2s^{2}2p^{6}3s^{2}

**Answer Na**- Na: 1s
^{2}2s^{2}2p^{6}3s^{1}

### Pauli Exclusion Principle

When we look at the orbital possibilities for a given atom, we see that there are different arrangements of electrons for each different type of atom. Since each electron must maintain its unique identity, we intuitively sense that the four quantum numbers for any given electron must not match up exactly with the four quantum numbers for any other electron in that atom.

For the hydrogen atom, there is no problem since there is only one electron in the \(\ce{H}\) atom. However, when we get to helium we see that the first three quantum numbers for the two electrons are the same: same energy level, same spherical shape. What differentiates the two helium electrons is their spin. One of the electrons has a \(+\frac{1}{2}\) spin while the other electron has a \(-\frac{1}{2}\) spin. So the two electrons in the \(1s\) orbital are each unique and distinct from one another because their spins are different. This observation leads to the **Pauli exclusion principle**, which states that no two electrons in an atom can have the same set of four quantum numbers. The energy of the electron is specified by the principal, angular momentum, and magnetic quantum numbers. If those three numbers are identical for two electrons, the spin numbers must be different in order for the two electrons to be differentiated from one another. The two values of the spin quantum number allow each orbital to hold two electrons. Figure \(\PageIndex{7}\) shows how the electrons are indicated in a diagram.

**Figure \(\PageIndex{7}\):** In an orbital filling diagram, a square represents an orbital, while arrows represent electrons. An arrow pointing upward represents one spin direction, while an arrow pointing downward represents the other spin direction.

Hund's Rule

The last of the three rules for constructing electron arrangements requires electrons to be placed one at a time in a set of orbitals within the same sublevel. This minimizes the natural repulsive forces that one electron has for another. **Hund's rule** states that orbitals of equal energy are each occupied by one electron before any orbital is occupied by a second electron and that each of the single electrons must have the same spin. The figure below shows how a set of three \(p\) orbitals is filled with one, two, three, and four electrons.

**Figure \(\PageIndex{8}\): **The \(2p\) sublevel, for the elements boron \(\left( Z=5 \right)\), carbon \(\left( Z=6 \right)\), nitrogen \(\left( Z=7 \right)\), and oxygen \(\left( Z=8 \right)\). According to Hund's rule, as electrons are added to a set of orbitals of equal energy, one electron enters each orbital before any orbital receives a second electron.

### Orbital Filling Diagrams

An **orbital filling diagram** is the more visual way to represent the arrangement of all the electrons in a particular atom. In an orbital filling diagram, the individual orbitals are shown as circles (or squares) and orbitals within a sublevel are drawn next to each other horizontally. Each sublevel is labeled by its principal energy level and sublevel. Electrons are indicated by arrows inside the circles. An arrow pointing upwards indicates one spin direction, while a downward pointing arrow indicates the other direction. The orbital filling diagrams for hydrogen, helium, and lithium are shown in the figure below.

**Figure \(\PageIndex{9}\): **Orbital filling diagrams for hydrogen, helium, and lithium.

According to the Aufbau process, sublevels and orbitals are filled with electrons in order of increasing energy. Since the \(s\) sublevel consists of just one orbital, the second electron simply pairs up with the first electron as in helium. The next element is lithium and necessitates the use of the next available sublevel, the \(2s\).

The filling diagram for carbon is shown in Figure \(\PageIndex{10}\). There are two \(2p\) electrons for carbon and each occupies its own \(2p\) orbital.

**Figure \(\PageIndex{10}\): **Orbital filling diagram for carbon.

Oxygen has four \(2p\) electrons. After each \(2p\) orbital has one electron in it, the fourth electron can be placed in the first \(2p\) orbital with a spin opposite that of the other electron in that orbital.

**Figure \(\PageIndex{11}\): **Orbital filling diagram for oxygen.

If you keep your papers in manila folders, you can pick up a folder and see how much it weighs. If you want to know how many different papers (articles, bank records, or whatever else you keep in a folder), you have to take everything out and count. A computer directory, on the other hand, tells you exactly how much you have in each file. We can get the same information on atoms. If we use an orbital filling diagram, we have to count arrows. When we look at electron configuration data, we simply add up the numbers.

Example \(\PageIndex{3}\): Carbon Atoms

Draw the orbital filling diagram for carbon and write its electron configuration.

**SOLUTION**

*Step 1: List the known quantities and plan the problem.*

__Known__

- Atomic number of carbon, Z=6

Use the order of fill diagram to draw an orbital filling diagram with a total of six electrons. Follow Hund's rule. Write the electron configuration.

*Step 2: Construct Diagram*

*Orbital filling diagram for carbon.*

Electron configuration 1s^{2}2s^{2}2p^{2}

*Step 3: Think about your result.*

Following the 2s sublevel is the 2p, and pp sublevels always consist of three orbitals. All three orbitals need to be drawn even if one or more is unoccupied. According to Hund's rule, the sixth electron enters the second of those pp orbitals and with the same spin as the fifth electron.

Exercise \(\PageIndex{2}\): Electronic Configurations

Write the electron configurations and orbital diagrams for

- Potassium atom: \(\ce{K}\)
- Arsenic atoms: \(\ce{As}\)
- Phosphorus atom: \(\ce{P}\)

**Answer a:**-
a) Potassium: \(1s^2 2s^2 2p^6 3s^2 3p^6 4s^1\)

**Answer b:**-
Arsenic: \(1s^2 2s^2 2p^6 3s^2 3p^6 4s^2 3d^{10} 4p^3\)

**Answer c:**-
Phosphorus \(1s^2 2s^2 2p^6 3s^2 3p^3\)

## Summary

There are four different classes of electron orbitals. These orbitals are determined by the value of the angular momentum quantum number *ℓ*. An orbital is a wave function for an electron defined by the three quantum numbers, *n*, *ℓ* and *m*_{ℓ}. Orbitals define regions in space where you are likely to find electrons. *s* orbitals (*ℓ* = 0) are spherical shaped. *p* orbitals (*ℓ* = 1) are dumb-bell shaped. The three possible *p* orbitals are always perpendicular to each other.

Electron configuration notation simplifies the indication of where electrons are located in a specific atom. Superscripts are used to indicate the number of electrons in a given sublevel. The Aufbau principle gives the order of electron filling in an atom. It can be used to describe the locations and energy levels of every electrons in a given atom. Hund's rule specifies the order of electron filling within a set of orbitals. Orbital filling diagrams are a way of indicating electron locations in orbitals. The Pauli exclusion principle specifies limits on how identical quantum numbers can be for two electrons in the same atom.

### Vocabulary

- principal quantum number (
*n*) - Defines the energy level of the wave function for an electron, the size of the electron's standing wave, and the number of nodes in that wave.
- quantum numbers
- Integer numbers assigned to certain quantities in the electron wave function. Because electron standing waves must be continuous and must not "double over" on themselves, quantum numbers are restricted to integer values.

### Contributors

CK-12 Foundation by Sharon Bewick, Richard Parsons, Therese Forsythe, Shonna Robinson, and Jean Dupon.

Henry Agnew (UC Davis)