4.E: Solutions (Exercises)
 Page ID
 69605
These are homework exercises to accompany the Textmap created for "Principles of Modern Chemistry" by Oxtoby et al. Complementary General Chemistry question banks can be found for other Textmaps and can be accessed here.
Q.1
A student goes to the hospital and has blood work done and the results state that he has a bromide count of \(3.17\frac{mg}{dL}\).
 What is the molar concentration of the students blood?
 What is the molality of the student's blood if the density of his blood was found to be \(1.06\frac{g}{mL}\)?
 How much of the students blood would be require to get \(3g\) of bromide?
 Solution

The molar mass of bromide is \(79.90\frac{g}{mol}\). \(1L=10dL\), \(1g=1000mg\)
\[\left(\dfrac{\textrm{3.17} \cancel{mg}\;}{\textrm{1} \cancel{dL}\;}\right)\left(\dfrac{\textrm{1} \cancel{g}\;}{\textrm{1000} \cancel{mg}\;}\right)\left(\dfrac{10\cancel{dL}}{\textrm{1} \textrm{L}\;}\right )\left(\dfrac{\textrm{1} \textrm{mol}\;}{\textrm{79.90} \cancel{g}\;}\right)=3.97\times10^{4}\ \frac{mol}{L}\nonumber \]Assume there is 1L of solution. Modality (m) is calculated by:
\[\textrm{3.17 x 10}^{2} \cancel{g}\;\left(\dfrac{\textrm{1} \textrm{ mol}\;}{\textrm{79.90} \cancel{g}\;}\right)\left(\dfrac{1\textrm{ }}{\textrm{1.06} \textrm{ kg}\;}\right )=3.74\times10^{4}\frac{mol}{kg}\nonumber \]If we know that there is \(3.17\times 10^{2}g\) of bromide in \(1L\) of blood, so all that needs to be done is divide \(3g\) by \(3.17\times 10^{2}\ \frac{g}{L}\):
Volume of Blood = 94.64 L
Q.5
Given a 3.1416 M aqueous solution of sucrose, \(\ce{C12H22O11}\) with a density of \(1.5986\ \frac{g}{mL}\). Calculate the molality of this solution, remember that the molar mass of sucrose is \(342.297\frac{g}{mol}\).
 Solution

Before we calculate the molality of this solution, don't forget that molarity is just mol/L so we will multiply the molarity of the solution by 1 L to isolate the moles.
\[1.00\; \cancel{L}\; Water=\dfrac{3.1416\: mol\ Sucrose}{1.00\; \cancel{L}\; Water}= 3.1416\; mol\ Sucrose\nonumber \]
Once we have the moles of Sucrose we will multiply it by the molar mass of sucrose in order to find the number of sucrose grams present in the solution:
\[3.1416\; \cancel{mol}\; Sucrose=\dfrac{342.297\: g\ Sucrose}{1.00\; \cancel{mol}\; Sucrose}= 1075.4\; g\ Sucrose\nonumber \]
We next will multiply the density by 1000 mL so as get the number of grams per liter, this way we can find the total grams of the solution and can subtract the sucrose grams from the solution grams to find the grams of water.
\[1000\; \cancel{mL}\; =\dfrac{1.5986\: g\ SucroseSoln}{1.00\; \cancel{mL}\; SucroseSoln}= 1598.6\; g/L\ SucroseSoln\nonumber \]
\[Water\; grams\; =[{1598.6g\; Sucrose\; Soln.\;}][{1075.4g\; Sucrose\; }]={523.2g}\; Water\; ={0.5232\; kg\; Water\;}\nonumber \]
Lastly we divide the moles of Sucrose by the kg of water in order to get molality.
\[\dfrac{3.1416\: mol\ Sucrose}{0.5232\; kg\; Water}= 6.005\; molal\nonumber \]
Q.9
A solution contains 75% of ethanol \((C_2H_6O)\) by mass and the rest is water.
 What is the density of the solution if there is 15 mol of ethanol per liter of solution?
 To prepare a 3.5L of 2M ethanol, how many mililiters of the solution is needed?
 Solution

a) For easy calculation, assume that there is 1 L of the solution. Using:
$$mol= molarity\times volume\]
The mol of 15M ethanol in 1L is 15 mol. The molar mass of ethanol is \(46.068\frac{g}{mol}\). Using the equation below:
\[ethanol\ mol = \dfrac{mass\ ethanol}{ethanol\ molar\ mass}\]
\[ethanol\ mass\ in\ the\ solution\ = ethanol\ mol\ \times molar\ mass=(15mol)(46.068\dfrac{g}{mol})=691.02g\]
Ethanol is 75% of the solution by mass, therefore:
\[mass\ of\ solution\times 0.75= mass\ of\ ethanol\]
\[mass\ of\ solution\times 0.75= 691.02g\]
\[mass\ of\ solution= \dfrac{691.02g}{0.75}=921.36g\]
The equation to calculate density is:
\[Density=\dfrac{mass}{volume}\]
\[Density = \dfrac{921.36g}{1L}=0.921\dfrac{g}{ml}\]
b)To prepare a 3.5L of 2M ethanol;
\[ethanol\ mol\ needed = molarity\times volume=(2M)(3.5L)=7mol\]
\[V_{ethanol\ needed}=\dfrac{mol\ needed}{molarity}=\dfrac{7mol}{15mol}\times1L=0.467L\]
0.467L of the solution is needed, which is 467mL.
Q.14
Rewrite the following balanced equations as net ionic equations.
 \(\ce{H2SO4(aq) + 2NaOH(aq) \rightarrow 2H2O(l) + Na2SO4(aq)}\)
 \(\ce{2Na3PO4(aq) + 3CaCl2(aq) \rightarrow 6NaCl(aq) + Ca3(PO4)2(s)}\)
 \(\ce{BaCl2(aq) + Na2SO4(aq) \rightarrow BaSO4(s) + 2NaCl(aq)}\)
 \(\ce{2AgNO3(aq) + ZnCl2(aq) \rightarrow 2AgCl(s) + Zn(NO3)2(aq)}\)
 Solution

 \(2H^{+} + 2OH^{} \rightarrow 2H_{2} O_{(l)}\)
 \(2PO_4^{3} + 3Ca^{2+} \rightarrow Ca_{3}(PO_{4})_{2(s)}\)
 \(Ba^{2+} + SO_{4}^{2} \rightarrow BaSO_{4(s)}\)
 \(2Ag^{2+} + Cl^{} \rightarrow 2AgCl_{(s)}\)
Q.15
Write the balanced chemical equation for the titration of \(H_2SO_4\) with \(KOH\), then find the volume of a 5.49M \(KOH\) solution needed to neutralize 36.2 g of \(H_2SO_4\) .
 Solution

The balanced equation of \(H_2SO_4\) with KOH is:
\[ H_{2}SO_{4(aq)} + 2KOH_{(aq)} \rightarrow K_{2}SO_{4(aq)} + 2H_{2}O_{(l)} \]
Calculate the amount of moles of \(H_2SO_4\) being neutralized:
\[ n_{H_{2}SO_{4}} = 36.2 \; g \; H_{2}SO_{4} \times \dfrac {1 \; mol \; H_{2}SO_{4}}{98.079 \; g \; H_{2}SO_{4}} = 0.369 \; mol \; H_{2}SO_{4} \]
Using stoichiometry to find the amount of moles of \(KOH\) needed to neutralize the amount of \(H_2SO_4\) present:
\[ n_{KOH} = 0.369 \; mol \; H_{2}SO_{4} \times \dfrac{2 \; mol \; KOH}{1 \; mol \; H_{2}SO_{4}} = 0.738 \; mol \; KOH \]
Calculate the volume of the 5.49 M \(KOH\) solution needed to neutralize the amount of \(H_2SO_4\) present:
\[ V_{KOH} = 0.738 \; mol \; KOH \times \dfrac{1 \; L}{5.49 \; mol \; KOH} = 0.134 \; L = 134 \; mL \]
Therefore, approximately 134 mL of the 5.49 M \(KOH\) solution is needed to neutralize 36.2 g \(H_2SO_4\).
Q.16
Phosphoric acid is made industrially as a byproduct of the extraction of calcium phosphate
\[ \ce{Ca_3(PO_4)_2 + 6HNO_3 + 12H_2O > 2H_3PO_4 + 3Ca(NO_3)_2 + 12H_2O} \nonumber\]
What volume of 8.5 M phosphoric acid is generated by the reaction of 4.5 metric tons (4500 kg) of calcium phosphate?
 Solution

\[4500\,kg\ Ca_{3}(PO_{4})_{2} \times \left(\dfrac{1000\,g}{1\ kg} \right) \times \left( \dfrac{1\ mol}{310 g} \right) \times \left( \dfrac{2\ H_{3}PO_{4}}{1\ Ca_{3}(PO_{4})_{2}} \right) \times \left( \dfrac{1\ L}{8.5\ moles} \right) =3415.56\ L\ H_{3}PO_{4} }\]
Q.19
Write a balanced equation for the acidbase reaction that leads to the production of each of the following salts.
 \(\ce{BaSO4}\)
 \(\ce{MgSO3}\)
 \(\ce{PbSO4}\)
 \(\ce{AgCl}\)
 Solution

 \( Ba(OH)_{2(aq)}+H_{2}SO_{4(aq)}\rightleftharpoons BaSO_{4(s)} +2H_{2}O_{(l)}\)
 \(Mg(OH)_{2(s)}+H_{2}SO_{3(aq)}\rightleftharpoons MgSO_{3(s)}+2H_{2}O_{(l)}\)
 \(Pb(OH)_{2(s)}+H_{2}SO_{4(aq)}\rightleftharpoons PbSO_{4(s)}+2H_{2}O_{(l)}\)
 \(AgOH_{(s)}+HCl_{(aq)}\rightleftharpoons AgCl_{(s)}+H_{2}O_{(l)}\)
Q.21
Hydrogen selenide is classified as a binary acid that has similar properties as hydrogen sulfide. Write down the balanced equation of hydrogen selenide reacting with the base potassium hydroxide and name the salt product of the reaction.
 Solution

When the acid \(H_2S\) reacts with the base \(KOH\), the reaction goes as follows:
$$H_2S+2KOH \rightarrow K_2S+2H_2O\]
Forming potassium sulfide.
Similarly, since \(H_2Se\) has similar properties as \(H_2S\), a similar reaction occurs:
$$H_2Se+2KOH\rightarrow K_2Se + 2H_2O\]
Potassium selenide is the salt product of the reaction.
Q.25
A student working with an unknown solution of hydrochloric acid is assigned the task of finding its concentration. The student places a 200.0mL sample of the solution in a 350.0mL Erlenmeyer flask and titrates the solution with a 0.1234 M solution of sodium hydroxide, where a phenolphthalein indicator is used to find the endpoint. The endpoint is found to be 31.416 mL, what is the concentration of the original hydrochloric acid solution sample?
 Solution

Remember that in titration of a strong acid and base, when the endpoint is reached the number of moles used is equal, so the number of moles of \(NaOH\) at the endpoint are equal to that of \(HCl\). Use this information to find moles of \(NaOH\) from the concentration and volume used to titrate.
\[ Concentration\; of\; X=\dfrac{moles\; of\; X }{liters\; of\; X}\nonumber \]
Use dimensional analysis to convert concentration of NaOH to moles using the known amount of volume titrated, in liters:
\[0.031416\; \cancel{liter}\; NaOH=\dfrac{0.1234\: mol\ NaOH}{1.00\; \cancel{liter}\; NaOH}= 0.003877\; mol\nonumber \]
Now because we know that the moles of \(NaOH\) are equal to the moles of \(HCl\) we simply plug in our calculated moles and known original sample volume, in liters, to find the concentration of \(HCl\):
\[ Concentration\; of\; HCl=\dfrac{0.003877\: mol\ HCl}{0.200\: liters\ HCl}= 0.019385\; M\; HCl\nonumber \]
The concentration of the original hydrochloric acid solution sample was, therefore, 0.019385 M.
Q.41
The vapor pressure of salicylic acid \((C_7H_6O_3)\) at 200°C is 0.1598 atm. A 19.0 g sample of ethanol \((C_2H_6O)\) is dissolved in 60.0 g of salicylic acid. Calculate the vapor pressure of salicylic acid above the resulting solution.
 Solution

First find the molar masses of salicylic acid and ethanol. Then use them to compute the chemical amounts of the two in solution.
\[n_{C_{2}H_{6}O}=19.0\;g\;{C_{2}H_{6}O}\times\dfrac{1\;mol\;{C_{2}H_{6}O}}{46.068\;g\;{C_{2}H_{6}O}}=0.4124\;mol\;{C_{2}H_{6}O}\nonumber \]
\[n_{C_{7}H_{6}O_{3}}=60.0\;g\;{C_{7}H_{6}O{3}}\times\dfrac{1\;mol\;{C_{7}H_{6}O{3}}}{138.121\;g\;{C_{7}H_{6}O{3}}}=0.4344\;mol\;{C_{7}H_{6}O{3}}\nonumber \]
The mole fraction of ethanol in the solution equals
\[X_{C_{2}H_{6}O}=\dfrac{0.4124}{0.4344+0.4124}=0.4870\nonumber \]
The change in vapor pressure of the salicylic acid due to the presence of of the ethanol is
\(\Delta{P_{C_{4}H_{6}O_{3}}} = X_{C_{4}H_{6}O_{3}}\times{P_{C_{4}H_{6}O_{3}}^{\circ}} = 0.5130\times0.1518atm= 0.08198\)
The final vapor pressure of the salicylic acid equals its original vapor pressure P° plus the change. This is 0.1598 atm minus 0.08198 atm, which is 0.07782 atm.
Q.43
When 53 mol of an unknown compound was added to 100 g of water, the normal boiling point of water increased to 101.1^{o}C. What is the boiling point elevation constant of water? The compound does not dissociate in solution.
 Solution

The relevant relationship here is the colligative property associated with boiling point elevation
$$\Delta T_{b}=iK_{b}m\]
$$\Delta T_{b}=101.1 ^{o}\,C100 ^{o}\,C=1.1^{o}\,C\]
Since the compound was told to not dissociation, we know that the van't Hoff factors is 1:
$$i=1\]
$$m=\dfrac{mol\ solute}{kg\ solvent}=\dfrac{53\,mol}{0.100\,kg}=0.53\frac{mol}{g} \]
$$1.1^{o}C=(1)\times K_{b}\times (0.53\frac{mol}{g})\]
$$K_{b}=\dfrac{1.1^{o}C}{0.53\dfrac{mol}{kg}}=2.075\dfrac{^{o}C\ kg}{mol}\]
This problem does not give the correct constant though 0.513:
https://chem.libretexts.org/Referenc...perties/B5%3A_Ebullioscopic_(Boiling_Point_Elevation)_Constants
Q.45
When 5.82 g of uniformly dissociating unknown salt, YX, is dissolved in 100.0 g of water, the boiling point of the water is raised by 0.20°C. When 7.09 g of uniformly dissociating unknown salt, ZX, is dissolved in 200.0 g of water, the boiling point of the water is raised by 0.30°C. Assuming both have a van't hoff factor of 2, identify the elements that X, Y, and Z represent.
 Solution

For both salts, one can utilize the boiling point elevation expression (including the van't hoff factor):
\(\Delta{T}= i\times K_b\times m\)
and by substituting moles solute over mass solvent into the molality, m, one can derive that:
\(n_{salt}= \dfrac{\Delta{T}\times m_{water}}{i\times K_b}\)
From this we get the moles of each salt present, and can therefore get their molar mass by dividing their mass by moles present. Next, subtracting the heavier salt by the lighter salt will yield the molar mass of X, \(\sim 35.5\frac{g}{mol}\). Subtracting this from the molar masses of each salt will then yield Y and Z respectively.
** \(\Delta T = i \times m\times K_b = 2\times m\times 0.512 = 0.2,\ m\ of\ YX = 0.1953\frac{mol}{kg};\ m \times 0.1kg = 0.0195\ mol;\ \frac{5.82}{0.0195} = 298.46\frac{g}{mol}\)
\(\Delta T = i \times m\times K_b = 2\times m\times 0.512 = 0.3,\ m\ of\ ZX = 0.2930\frac{mol}{kg};\ m\times 0.2 kg = 0.0586\ mol; \frac{7.09}{0.0586} = 120.99\frac{g}{mol}\)
molar mass difference between Y and Z = \(298.46  120.99 = 177.47\frac{g}{mol}\) **
Q.47
Camphor is a useful agent for determining solute’s molar mass. Camphor’s melting point and \(K_f\) are given at \(451.55K\) and \(37.7\frac{K\ kg}{mol}\). Find the freezing point of the solution of 0.72 g of glucose is dissolved in the 30.0 g of camphor.
 Solution

Since we are evaluating glucose as the solute, \(i = 1\).
\[\Delta T = iK_{f}m\]
First find number of moles of glucose in the solution using molar mass.
\[Moles_{glucose} = \frac{(0.72g)}{(180.1559\frac{g}{mol})}= 0.0040mol\]
Molality then can be determined.
\[m= \frac{(0.0040mol)}{(0.030kg)}= 0.13\frac{mol}{kg}\]
Freezing then can be easily found as such:
\[\Delta T = iK_{f}m=(1)(37.7\frac{^oC\ kg}{mol})(0.13\frac{mol}{kg})=4.9^oC\]
The freezing is \(451.55K  4.9K = 446.65K = 173.5^oC\).
Q.48
It is observed that 2 grams of a nonelectrolyte solute dissolved in 100 grams of benzene lowered the freezing point of the solution by 0.40°C compared to pure benzene. Given that the freezing point depression constant of benzene is 5.12 K kg/mol, find the molar mass of the solute. If it is given that the molecular formula of the solute is \(X_8\) where \(X\) is an element, what is the formula of the solute?
 Solution

\[\Delta T = ik_fm \nonumber\]
It is given that $$\Delta T = 0.40°C$$
Since the solution is a nonelectrolyte, i=1
Hence,
\[\dfrac{0.40}{K_f} = m\nonumber\]
\[m = \dfrac{\frac{2}{Molecular \:Mass}}{100\times10^{3}} = \dfrac{\frac{2}{Molecular\:Mass}}{0.1}\nonumber\]
Hence, we get
\[\dfrac{0.40\times 0.1}{K_f} = \dfrac{2}{Molecular\:Mass}\nonumber\]
\[Molecular\:Mass = \dfrac{2K_f}{0.40\times0.1} \nonumber\]
Hence, the Molecular Mass of the solute is \(256 \,\frac{g}{mol}\)
Since the Molecular Mass of the solute is \(256 \,\frac{g}{mol}\), we can say that,
\[\Molecular\:Mass\:of\:X = \dfrac{256}{8} = 32\nonumber\]
The solute is \(S_8\).
Q.49
At what temperature does the first ice crystals begin to form in a 27% salt (by mass) aqueous solution of \(NaCl\)? As the crystallization of water carries on, the remaining solution becomes more concentrated, so what happens to the freezing point of the solution? Given that the freezing point depression constant \((K_f)\) of water is \(1.86\frac{^oC\ kg}{mol}\).
 Solution

$$27 \%\: NaCl_{(aq)} = \dfrac{27 \; g \; NaCl}{73 \; g \; H_{2}O}\]
$$ molality = \dfrac{27 \; g \; NaCl}{73 \; g \; H_{2}O} \times \dfrac{mol \; NaCl}{58.44 \; g} \times \dfrac{1000 \; g}{1 \; kg} = 6.33 \; m \]
$$ \Delta T = i\times m\times K_{p} = 2 \times 6.33 \dfrac{mol}{kg} \times 1.86 \dfrac {^{o}C \cdot kg}{mol} = 23.5^{o}C \]
The first ice crystal begins to appear at \(23.5^oC\), as the solution becomes more concentrated, its freezing point decreases further because freezing point depression is a colligative property, so the freezing point of a solution is lower than that of the pure solvent and is directly proportional to the molality of the solute.
Q.50
When homemade ice cream is being made, the temperature ranging downward from \(3^oC\) are needed. Ice cubes from a freezer have a temperature of about \(12^oC\), which is cold enough; however, when the ice cream mixture is mixed with the ice cubes, the liquid balances out to \(0^oC\), which is too warm. To obtain a liquid that is cold enough, salt \((NaCl)\) is dissolved in water and ice is added to the saltwater. The salt lowers the freezing point of the water enough so that it can freeze the liquid inside the ice cream maker. The instruction for the ice cream maker say to add one part salt to 11 parts water (by mass). What is the freezing point of this solution in \(^oC\)? Assume the \(NaCl\) dissociates fully into ions, and that the solution is ideal.
 Solution

\[\Delta T_{f} = i k_{f} m\]
\[\dfrac{1.00\ g\ NaCl}{53.5\frac{g}{mol}}=0.01869\ mol\ NaCl\]
\[m=\dfrac{0.01869\ mol}{11.00 g(\dfrac{1\ kg}{1000\ g})}=1.699 m\]
\[x  (12°C) =  (2)\times (1.86\frac{^oC}{m})\times (1.699 m)\]
\[x = 18.32^oC\]
Q.53
A sample of a purified unknown compound is dissolved in toluene, diluting the solvent to a volume of 1.05 mL. The resulting solution has an osmotic pressure of 0.025 atm at 275 K. If the solute has a molar mass of 46.06 g/mol, how many grams of the unknown compound were added?
 Solution

\(\Pi\) = \(\dfrac{nRT}{V}\)
and we know \(T= 275K\), \(R=0.0821\dfrac{L\ atm}{mol\ K}\) and \(\Pi\)=0.025 atm
Thus V= 1.05 mL
Since we need V in liters because the units of R are \(\dfrac{L\ atm}{mol\ K}\) , we use unit conversions:
\(1.05\ mL\times \dfrac{1 L}{1000 mL} = 0.00105\ L\)
Plug in the values we know to find n
\(0.025= \dfrac{n\times 0.0821\times 275}{0.00105}\)
\(\dfrac{0.025\times 0.00105}{0.0821\times 275} = n\)
\(n=1.163\times 10^{6}\)
Now that we know number of moles we just have to multiply the number of moles by the molar mass to find grams of substance.
\((1.163\times 10^{6}) \times 46.06844\frac{g}{mol}=5.356\times 10^{5}g\)
Q.57
An amount of hydrogen gas (\(\ce{H_2}\)) with a partial pressure of 4.6 atm is dissolved in water and this solution is sealed. The Henry's Law constant K for this solution at \(25^oC\) is \(7.8\times 10^{4} \frac{M}{atm}\).
 How many moles of hydrogen gas will dissolve per liter of water? Assume the density of water is \(1.0\frac{grams}{cm^3}\) and has not been affected by the temperature.
 What will the dissolved gas molecules do if the sealed solution is unsealed?
 Solution

a) According to Henry's Law,
\[C = k \times P_{gas}\nonumber \]
In this equation, C = concentration of gas (M), k = Henry's Law constant \((\frac{M}{atm})\), and \(P_{gas}\) = partial pressure of gas.
So, given k and \(P_{gas}\):
\[C = 7.8 \times 10^{4} \dfrac{M}{atm} \times 4.6 \; atm\nonumber \]
\[C = 0.003588 \dfrac{mol \; H_2}{L_{water}}\nonumber \]
b) The partial pressure of \(H_2\) in the Earth's atmosphere is less than 1 atm. When the solution is unsealed, the \(H_2\) molecules will no longer be under enough pressure to dissolve in water, so they will quickly bubble out of the solution and escape as gas into the surroundings.
Q.59
Propene is a colorless organic compound with a weak but unpleasant smell. However, a company can take advantage of its chemical properties to produce propanol:
\[ C_{3}H_{6}+H_{2}O \rightarrow CH_{3}(CH_{2})_{2}OH \nonumber\]
 The heat of formation of propene is \(20.4\frac{kJ}{mol}\).
 The heat of formation of \(H_2O\) is \(241.8\frac{kJ}{mol}\).
 The heat of formation of \(CH_3(CH_2)_2OH\) is \(104.6\frac{kJ}{mol}\).
What suggestions can you give to the company regarding the conditions of pressure and temperature that will have a maximum yield of propanol at equilibrium without calculating the actual data?
 Solution

\[\Delta H^{o}_{f(propene)}=20.4\dfrac{kJ}{mol}\]
\[\Delta H^{o}_{f(water)}=241.8\dfrac{kJ}{mol}\]
\[\Delta H^{o}_{f(CH_{3}(CH_{2})_{2}OH)}=104.6\dfrac{kJ}{mol}\]
\[\Delta H^{o}=\Delta H^{o}_{f(CH_{3}(CH_{2})_{2}OH)}\Delta H^{o}_{f(propene)}\Delta H^{o}_{f(water)}\]
\[=104.6\dfrac{kJ}{mol}(241.8\dfrac{kJ}{mol})20.4\dfrac{kJ}{mol}\\=116.8\dfrac{kJ}{mol}>0\]
It is an endothermic reaction. As a result, a higher temperature is required to maximize the yield of product.
Also, according to the ideal gas law, because the moles of gas are proportional to the volume, and the volume is inverse proportional to the pressure; a higher pressure is required to maximize the yield of product.
Q.61
Suppose heptane and octane form an ideal solution. At \(20.0\text{°C}\), pure heptane has a vapor pressure of \(\ce{P^°_1}\)= \(0.0562\ \text{atm}\)while pure octane has a vapor pressure of \(\ce{P^°_2}\)= \(0.0145\ \text{atm}\). What is the mole fraction of heptane vapor over a solution of heptane and octane if the solution contained \(0.300\ \text{mol}\) heptane and \(0.700 \ \text{mol}\) octane?
 Solution

Since we have been told to assume the solution is ideal, we can use Raoult's law to obtain the partial pressures of heptane and octane, respectively.
\( P_{heptane} = \left( \dfrac{0.300\ \text{mol}}{0.300\ \text{mol} + 0.700 \ \text{mol}} \right) \times \left( 0.0562\ \text{atm} \right) = 0.01686\ \text{atm} \)
\( P_{octane} = \left( \dfrac{0.700\ \text{mol}}{0.300\ \text{mol} + 0.700 \ \text{mol}} \right) \times \left( 0.0145\ \text{atm} \right) = 0.01015\ \text{atm} \)
Using the relationship between partial pressure and mole fraction, we can obtain the mole fraction of heptane over the solution. Partial pressure and mole fraction can be related through the ideal gas law \( P = n\dfrac{RT}{V} \). Which shows that under constant temperature and pressure, pressure and number of moles are directly related.
\( \ce{\chi}_{heptane} = \left( \dfrac{ 0.01686\ \text{atm}}{ 0.01686\ \text{atm} + 0.01015\ \text{atm}} \right) = 0.624 \)
Q.63
At 50^{o}C, benzene \((C_6H_6)\) has a vapor pressure of 42.5 kPa and isobutene \((C_3H_8)\) has a vapor pressure of 0.83 torr. When 10.0 g of benzene and 30 g of isobutene are mixed in a solution, they form a nearly ideal solution.
 Calculate the mole fraction of benzene in the solution.
 What is the total vapor pressure above the solution in kPa at 50^{o}C ?
 Calculate the mole fraction of isobutene that exists above the solution in the vapor phase.
 Solution

The mole fraction is equal to:
\[\left (\dfrac{\chi_A\: mol}{\chi_A + \chi_B\: mol} \right )\nonumber \]
Use dimensional analysis to convert grams to moles:
\[(10.0\; \cancel{g\; C_{6}H_{6}}) \left(\dfrac{1\: mol}{78.108\: \cancel{ g\; C_{6}H_{6}}} \right) = 0.128\; mol\nonumber \]
\[(30.0\; \cancel{g \;C_{3}H_{8}} ) \left (\dfrac{1\: mol}{44.094\: \cancel{g\; C_{3}H_{8}}} \right ) = 0.680\; mol\nonumber \]
Let:
\(\chi_A = \text{ the moles of } C_{6}H_{6} = 0.128\; mol\) \(X_B = \text{ the moles of } C_{3}H_{8} = 0.680\; mol\)\[ {\chi_B}=\dfrac{0.0929\;kPa}{6.81\;kPa} = 0.0136\nonumber \]
Plug into the equation and solve:
\[ \left (\dfrac{0.128\: mol}{0.128 + 0.680\: mol} \right )= 0.158\nonumber \]
b) Since the problem states that the result of mixing the two solutions is nearly ideal, we can assume an ideal solution is formed and use Raoult’s Law and we can choose to keep pressure in units of kPa OR torr.
lt’s Raoult's Law:
\({P_A} = {\chi_A}\times{P^o_A} \)
Here we have chosen to use units of kPa:
\[P_{C_{6}H_{6}} = \chi_{ C_{6}H_{6}}\times P^o_{C_{6}H_{6}} \nonumber \]
\[P_{C_{6}H_{6}} = 0.158\times 42.5\; kPa = 6.72\;kPa\nonumber \]
To convert torr to kPa:
\[(0.83\; \cancel{torr} ) \left (\dfrac{0.133\: kPa}{1\: \cancel{torr}} \right ) = 0.1104\; kPa\nonumber \]
\[P_{C_{3}H_{8}} = \chi_{ C_{3}H_{8}}\times P^o_{C_{3}H_{8}} \nonumber \]
\[P_{C_{3}H_{8}} = 0.842\times 0.1104\; kPa= 0.0929\;kPa\nonumber \]
Then we add these up to find the total pressure:
\[{P_{Total}} = {\chi_A}{P^o_A} + {\chi_B}{P^o_B} \nonumber \]
\[{P_{Total}} = 6.72\;kPa + 0.0929\;kPa \ = 6.81\;kPa\nonumber \]
c) To find the mole fraction of isobutene in the vapor, we can use:
\[{P_B} = {\chi_B}\times{P_{Total}} \nonumber \]
Q.65
A solution is prepared by mixing 2g of \(CaCl_{2(s)}\), 2g of \(MgCl_{2(s)}\), and 3g of \(MnO_{2(s)}\) in enough water to make a total volume of 150 mL. Calculate the concentration of chlorine in the solution in grams per liter.
 Solution

\(m_{Cl}=2g\ CaCl_2(\frac{2(35.5g\ Cl)}{110.98g\ CaCl_2}) + 2g\ MgCl_2(\frac{2(35.5g\ Cl)}{95.12g\ MgCl_2})\)
\(m_{Cl}=2.77g\ Cl\)
\(mass\ of\ chlorine\ per\ liter: \frac{2.77g\ Cl}{150\times 10^{3}L}=18.5\frac{g}{L}\)
Q.69
Chromium ion, \(Cr^{2+}\), is a good reducing agent, often being itself turned into \(Cr^{3+}\). Suppose that 10 mL of 0.1 M \(Cr(OH)_2\) was needed to reduce completely an 0.05 grams of unknown substance X.
 If each molecule of X accept just one electron, what is the molecular weight of X?
 If each molecule of X accept five electrons, what is the molecular weight of X?
 Solution

(a) Number of moles of \(Cr(OH)_2\) used = \(M\times V\)
\(= 0.1\times 10\ mL = 1\ mmol = 10^{3}\ moles\)
Since only one mole of X was used for every mole of Chromium Hydroxide, the number of moles reacted are equal.
\(\frac{Mass}{Molar\ mass}\) = number of moles, hence for X,
\(\frac{0.05\ g}{(0.01L\times 0.1M)}= 50\frac{g}{mol}\)
(b) \(\frac{0.05\ g}{(0.01L\times 0.1M\times 5)}= 10 \frac{g}{mol}\)
Q.71
A 0.200 g sample of chloride with unknown purity was dissolved in 200 mL of water was then titrated with \(AgNO_3\) solution with a molarity of 0.1^{ }M. After the titration it was determined that 28 mL of \(AgNO_3\)_{ }was required to fully titrate the sample of chloride. What's the mass percent of chloride in the original dry sample?
 Solution

First write the precipitation reaction:
\[Ag^{+}_{(aq)} + Cl^{}_{(aq)} \rightarrow AgCl_{(s)}\nonumber \]
Next we need to determine the amount of moles of \(Ag\) used during the titration:
\[\textrm{mol Ag}^{1+}=\textrm{28} \cancel{mL}\;\left(\dfrac{\textrm{1} \cancel{L}\;}{\textrm{1000} \cancel{mL}\;}\right)\left(\dfrac{0.1\textrm{ mol}}{\textrm{1} \cancel{L}\;}\right )=2.80\times10^{3}\textrm{ mol Ag}^{1+}\nonumber \]
Now that we know the amount of moles of \(Ag\) reacted because \(Ag\) and \(Cl\) combine at a one to one ration we can find the mass of \(Cl\) used:
\[\textrm{mass Cl}^{1}=2.80\times10^{3}\cancel{mol}\;\left(\dfrac{35.45\textrm{ g}}{\textrm{1} \cancel{mol}\;}\right )=9.92\times10^{2}\textrm{ g Cl}^{1}\nonumber \]
Now that we know the mass of \(Cl\) in the unknown we can calculate the mass percent:
\[100\textrm{%}\;\left(\dfrac{0.0992\textrm{ g}}{\textrm{0.2} \textrm{g}\;}\right )=49.63\textrm{%}\nonumber \]
Q.73
At 20°C, the vapor pressure of pure water is 17.5 mmHg. When 110 g of a substance \(X_y\) is dissolved in 500 g of water, the vapor pressure of the solution is 15.0 mmHg. Given that this substance has a molecular mass of 12.011 g/mol, what is the molecular formula of this substance \(X_y\). (i.e. what is the number value of subscript y).
 Solution

For this question, we can use Raoult's Law
\[P_{solution} = X_{solvent} \times P°_{solvent}\nonumber \]
First, we plug in the known values of the pressure of the solution and the pressure of the pure solvent, water, to find the mole fraction.
\(15.0 \; mmHg = X_{solvent} \times 17.5 \; mmHg\)
\(X_{solvent} = 0.8571\)
Next, we can calculate the the number of moles of the solvent from its mass and molecular weight.
\(Moles \; of \; solvent = 500 \; g \times \dfrac {1}{18.015 \; g/mol} = 27.75 \; moles\)
Next, we can calculate the moles of the solute from the mole fraction of the solvent
\(0.8571 = \dfrac{27.75 \; moles}{27.75 \; moles \; + \; moles \; of \; X_y}\)
\(moles \; of \; X_y = 4.63 \; moles\)
From here, we can calculate the molecular formula of the substance by dividing the amount of grams per mole used in the solution by the molecular mass of the substance.
\(\dfrac {110 \; g}{4.63 \; moles} = 23.76 \; g/mol\)
\((23.76 \; g/mol) \times (\dfrac {1}{12.011 \; g/mol}) = 1.98\)
\(1.98 \approx 2\)
Thus, the molecular formula of our substance is \(X_2\).
Q.81
The cell membrane of a plant cell is permeable to water. In a salt solution, the plant cells shrivel (lose water) when the concentration is high, and swell (take up water) when the concentration is low. Scientists perform an experiment at 30°C, where an aqueous solution of \(NaCl\) with a freezing point of 0.028°C is used to water the plant cells. This causes the plant cells to neither swell nor shrink indicating that the osmotic pressure of the plant cell contents is equal to that of the \(NaCl\) solution. Assuming the molarity and molality of the plant cell contents are equal, calculate the osmotic pressure of the solution inside the plant cells. The \(K_f\)_{ }for the solution is \(1.86\frac{K\ kg}{mol}\).
 Solution

Plug in the given values into the equation for freezing point depression to solve for the molality of the solution
\[\Delta T_{f}=K_{f}m\nonumber \]
\[0.0218=1.86 K\bullet kg \bullet mol^{1}m\nonumber \]
\[m=0.015\dfrac{kg}{mol}\nonumber \]
Because the plant cell neither swells nor shrinks, the molality of the solution is equivalent to the molality of the plant cell contents. According to the question, assume the molarity and molality are equal so concentration
\[c=0.15M\nonumber \]
Use the following equation to calculate for the osmotic pressure, π.
\[\pi=cRT\nonumber \]
\[\pi=(0.15M)(0.08206\frac{L\ atm}{mol\ K})(303.15K)\nonumber \]
\[pi=0.374atm\nonumber \]
Q.83
Jim loves the smell of grass. He loves it so much that he frequently sniffs the fumes from 1Hexanol, which is a chemical compound that is known to smell like grass trimmings. Because of his love, he decides to make his garage into a “gas den”, and aimed to have 60% of the air in it as 1Hexanol gas. He achieves this by filling a pool with a mixture of 1Hexanol and Water. Assume that the air in the “gas den” consists of only the fumes from this mixture. If the pool has \(10000L\) of water in it, how many litres of 1Hexanol does he need? Use Henry’s Law to determine this amount.
Relevant Information:
1Hexanol:
 Density: \(814\dfrac{kg}{m^3}\)
 Molar mass: \(107.1748\dfrac{g}{mol}\)
 Henry’s Law Constant: \(64\dfrac{molal}{bar}\)
Water:
 Density: \(1000\dfrac{kg}{m^3}\)
 Solution

This problem asks for the amount, in litres, of 1Hexanol that is required to make Jim’s dreams come true. The information given is the density of 1Hexanol and its molar mass, but since they don’t have very much to do with pressure, they can be set aside for now. The question explicitly mentions that Henry’s Law should be used, so start be identifying what Henry’s Law actually does:
\[C = kP\nonumber \]
Where C is concentration, k is Henry’s Law constant, and P is partial pressure. The question gives out the fact that Jim wants the air in his garage to be 60% 1Hexanol vapor. Therefore, the partial pressure of 1hexanol is 0.6 (which is what 60% looks like in decimal form). The Henry’s Law constant is also provided, and by plugging those two in, the concentration of 1Hexanol in the desired “solution” (more accurately, giant pool of chemicals) is found. This process is shown below:
\[C= kP = (64\dfrac{molal}{bar})\times{0.6}= 38.4\nonumber \]
This concentration, from the units of k, is in molality, which is \(\dfrac{mol_{solute}}{kg_{solvent}}\). Now all that is left is to convert molality to litres. By utilizing the molar mass of 1Hexanol:
\[38.4\dfrac{mol_{solute}}{kg_{solvent}}\times{107.1748\dfrac{g}{mol}}\approx{4115.51\dfrac{g_{solute}}{kg_{solvent}}}\nonumber \]
We know that the solvent is water, and that water has a density of \(1000\dfrac{kg}{m^3}\). Also, the conversion rate of \(m^{3}\) to \(L\) is 1:1. Therefore, the equation can be solved as follows.
\[4115.51\dfrac{g_{solute}}{kg_{solvent}}\times1000\dfrac{kg_{H_{2}O}}{m^3}\times\dfrac{m^3}{L_{H_{2}0}}\approx4115510\dfrac{g_{solute}}{L_{solvent}}\nonumber \]
We now have the value for how many grams of solute (1Hexanol) there should be per litre of solvent. simply divide this value by the density to obtain litres of 1Hexanol per litre of water. Multiply this number by the amount of water in the pool to get the desired amount of solute that is needed for the solution! (note that the density was converted to \(\dfrac{g}{L}\),
\[4115510\dfrac{g_{solute}}{L_{solvent}}\div814000\dfrac{g_{1hexanol}}{L}\times10000L_{H_{2}O}=50560L\nonumber \]
Therefore, Jim needs 50,560L of 1Hexanol to put in his pool. That's going to take a big pool!
Please note that, while various units do appear in the conversions, \(H_{2}O\) can be considered as solute and \(1Hexanol\) as the solvent, so the units can cancel.
Abstract: Utilize henry's law to find concentration (\(molality\)). From that, convert molality to \(g_{solute}\) to \(L_{solute}\).
Q.87
A 3.5 gram sample is decomposed into a compound containing nitrogen, hydrogen, and oxygen, together creating 4.00 g of \(NO_2\) and 7.00 g of \(H_2O\). The molar mass of the sample is \(78.5\frac{g}{mol}\). Find the molecular formula of this sample.
 Solution

First, the moles of each Nitrogen, Hydrogen, and Oxygen in solution are calculated:
\(mol_N = 4g\ NO_2 \times (\frac{1\ mol\ NO_2}{46.005\frac{g}{mol}})\times (\frac{1\ mol\ N}{1\ mol\ NO_2}) = 0.0869\ mol\)
\(mass_N = (14.00\frac{g}{mol})(0.0869mol) = 1.2172g\ N\)
\(mol_H = 7g\ H_2O\times (\frac{1\ mol\ H_2O}{18.02\frac{g}{mol}})\times (\frac{2\ mol\ H}{1\ mol\ H_2O}) = 0.7769\ mol\)
\(mass_H = (1.01\frac{g}{mol})(0.7769 mol) = 0.7847g\ H\)
From these values, moles of \(O\) can be calculated to be:
\(3.5\ gram\ sample = grams_N + grams_H + grams_O\)
\(3.5 = 1.2172 g + 0.7847 g + grams_O\)
\(grams_O = 1.4981g\)
\(mol_O = \frac{1.4981g}{15.9994\frac{g}{mol}} = 0.0936\ mol\)
The mole values for each element create a ratio of \(H_{0.7769}N_{0.0869}O_{0.0936}\), creating an empirical formula \(H_9NO\)
From here, the molecular formula can be established using the molar mass:
\(Empirical\ formula\ mass = 9(1.01\frac{g}{mol\ H}) + (14.00\frac{g}{mol\ N}) + (15.9994\frac{g}{mol\ O})\)
\(Empirical\ formula\ mass = 39.0894\frac{g}{mol}\)
\(Sample\ Mass = 78.5\frac{g}{mol}\)
\(\frac{78.5\frac{g}{mol}}{39.084\frac{g}{mol}} = 2.00\)
\(2(H_9NO) = H_{18}N_2O_2 = Molecular\ Formula\)
Q.87
5 grams of a substance containing hydrogen, carbon and oxygen were fully combusted and produced 3.00 grams of \(H_2O\) and 7.33 grams of \(CO_2\)_{.} When 10.64 grams of the substance was mixed with 0.5 kg of water, the freezing point was found to decrease by 0.0605°C. What is the substance?
 Solution

The generic equation for this reaction is
\[C_{x} H_{y} O_{z} + O_{2} → H_{2}O + CO_{2} \nonumber \]
The molar masses of carbon, hydrogen, and oxygen are 12.01 g/mol, 1.008 g/mol, and 16.00 g/mol respectively. Therefore the molar masses of water and carbon dioxide are \(18.016\frac{g}{mol}\) and \(44.01\frac{g}{mol}\). These values can be used to determine the mass percent of hydrogen in water
\[\dfrac {2 (1.008)\; \frac{g}{mol}} {18.016\; \frac{g}{mol}} \times 100 =11.2% \nonumber \]
And the mass percent of carbon in carbon dioxide
\[\dfrac{12.01\; \frac{g}{mol}} {44.01\; \frac{g}{mol}} \times 100 =27.3% \nonumber \]
The mass percents can be used to determine the amount of hydrogen and carbon are present.
\[3.00\; g \times 0.112 = 0.336\; g\; \text {of Hydrogen} \nonumber \]
\[7.33\; g \times 0.273 = 2.001\; g\; \text {of Carbon} \nonumber \]
By subtracting the masses of Carbon and Hydrogen from the original mass of the substance, the mass of oxygen present in the substance can be found
\[5\; g  (0.336\; g + 2.001\;g) = 2.663\; g\; \text {of Oxygen} \nonumber \]
By dividing the masses present by the molar mass, the amount of moles of each element can be determined
\[ \dfrac{0.112\; g}{1.008\; \frac{g}{mol}} = 0.333\; mol\; \text {of Hydrogen} \nonumber \]
\[ \dfrac{2.001\; g}{12.01\; \frac{g}{mol}} = 0.167\; mol\; \text {of Carbon} \nonumber \]
\[\dfrac{2.663\; g}{16.00\; \frac{g}{mol}} = 0.166\; mol\; \text {of Oxygen} \nonumber \]
By looking at the amount of moles of each element, it can be noticed that there are equal amounts of carbon and oxygen and twice as much hydrogen as carbon or oxygen. Therefore the ratio of \(C:H:O\) in the substance is \(1:2:1\). However, the molar mass of the substance remains unknown, but it can be found using the information about the freezing point depression.
From the formula for freezing point depression
\[\Delta T=i \times k_{f} \times m\nonumber \]
\[0.0605°C = 1 \times 0.512°C\; m^{1} \times m \nonumber \]
\[m=\dfrac{0.0605°C}{0.512\frac{°C}{m}}=0.118\; \frac{mol}{kg}\nonumber \]
By multiply by the mass of solvent (water), we can determine the amount of moles that was dissolved in the water
\[0.118\; \frac{mol}{kg} \times 0.5\; kg = 0.059\; mol\nonumber \]
The last step in finding the molar mass of the substance is to divide the mass dissolved by the moles dissolved
\[\dfrac{10.64\;g}{0.059\; mol} = 180.3\; \frac{g}{mol}\nonumber \]
Now we can find the formula of the substance. The first step is to find the number of moles of the substance combusted
\[\dfrac {5\;g} {180.3\; \frac{g}{mol}} = 0.0277\; mol\nonumber \]
We can compare this to the number of carbon moles combusted to determine the number of carbon atoms per molecule of the substance
\[\dfrac {0.167\; g \text{ of Carbon}\;} {0.0277\; mol} = 6 \text{ Carbon atoms} \nonumber \]
When we apply the number of carbon atoms to the ratio of elements found earlier, the chemical formula comes to be \(C_{6}H_{12}O_{6}\) which is glucose.
Answer: Glucose