20.8: Chemistry of Nitriles
-
- Last updated
- Save as PDF
Objectives
After completing this section, you should be able to
-
discuss, in detail, the preparation of nitriles:
- write an equation to illustrate the formation of a nitrile by the nucleophilic attack of cyanide ion on an alkyl halide.
- write an equation to illustrate the formation of a nitrile by the dehydration of a primary amide.
- identify the product formed when a primary amide is treated with SOCl 2 , P 2 O 5 , or POCl 3 .
- identify the primary amide, the reagents, or both, needed to prepare a given nitrile by a dehydration reaction.
- write a detailed mechanism for the dehydration of a primary amide by thionyl chloride.
-
discuss, in detail, the reactions of nitriles:
- write an equation to describe the (acidic or basic) hydrolysis of a nitrile.
- write detailed mechanisms for the acidic and basic hydrolysis of nitriles.
- identify the products formed from the (acidic or basic) hydrolysis of a given nitrile.
- identify the nitrile, the reagents, or both, needed to obtain a given carboxylic acid from a hydrolysis reaction.
- write an equation to describe the reduction of a nitrile to give a primary amine.
- identify the product formed from the lithium aluminum hydride reduction of a given nitrile.
- identify the nitrile, the reagents, or both, needed to prepare a given amine by direct reduction.
- write a detailed mechanism for the reduction of a nitrile to a primary amine using lithium aluminum hydride.
- give an example of the reduction of a nitrile with diisobutylaluminum hydride.
- write an equation to illustrate the reaction of a nitrile with a Grignard reagent.
- identify the product formed from the reaction of a given nitrile with a given Grignard reagent.
- identify the nitrile, the Grignard reagent, or both, needed to prepare a given ketone.
- write a detailed mechanism for the reaction of a nitrile with a Grignard reagent.
Study Notes
To be able to understand the driving force behind the reactions of nitriles, you must recognize the polarity of this group:
You can therefore expect to see similarities between the behaviour of the nitrile group and the similarly polarized carbonyl group:
Properties of Nitriles
The electronic structure of nitriles is very similar to that of an alkyne with the main difference being the presence of a set of lone pair electrons on the nitrogen. Both the carbon and the nitrogen are sp hydridized which leaves them both with two p orbitals which overlap to form the two \(\pi\) bonds in the triple bond. The R-C-N bond angle in a nitrile is 180 o which give a nitrile functional group a linear shape.
The lone pair electrons on the nitrogen of a nitrile are contained in a sp hybrid orbital. The 50% s character of an sp hybrid orbital makes the lone pair electrons closer to the nucleus and therefore less basic when compared to lone pair electrons on sp 3 hybridized nitrogen (25% s character) containing compounds such as amines.
The presence of an electronegative nitrogen causes nitriles to be very polar molecules. Consequently, nitriles tend to have higher boiling points than molecules with a similar size. Also, the polar nature of nitriles promotes their solubility in water.
Interesting Nitriles
One of the most common occurrences of nitriles is in Nitrile rubber. Nitrile rubber is a synthetic copolymer of acrylonitrile and butadiene. This form of rubber is highly resistant to chemicals and is used to make protective gloves, hoses and seals. Amygdalin is a naturally occurring molecule contained by certain plants to protect themselves against herbivores and insects. Acting as a sort of natural pesticide, amygdalin degrades to release poisonous hydrogen cyanide (HCN) when any plant material is chewed by an insect or animal. There are also several nitrile containing molecules that have medicinal uses such as Cyamemazine, which is an antipsychotic drug primarily used to treat schizophrenia and certain types of anxiety. Also, Citalopram is an antidepressant primarily used to treat depression, panic disorder, and social phobia. It is currently among the most prescribed drugs in the United States (#21 in 2019 with over 26,000,000 prescriptions).
Preparation of Nitriles
Formation of a Nitrile from an Aldehyde or Ketone
Addition of cyanide ( - :C≡N) to an aldehyde or ketone forms a cyanohydrin
Nitriles are formed by an S N 2 reaction between primary and secondary alkyl halides and sodium cyanide. Tertiary and aryl halides cannot be used for this reaction.
Formation of a Nitrile from a 1 o Amide
Primary amides can be converted to nitriles by dehydration with thionyl chloride (SOCl 2 ) or other dehydrating agents like such as P 2 O 5 , or POCl 3 .
Mechanism
For the reaction of primary amides with thionyl chloride, the mechanism begins with the lone pair of electrons from the nitrogen atom forming a protonated imine and pushing the pi electrons of the carbonyl to undergo nucleophilic attack on the sulfur of thionyl chloride. This forms a O-S sigma bond and causes the pi electrons of the thionyl bond (S=O) to be pushed onto the oxygen. The thionyl bond reforms in concert with the loss of a chloride leaving group (Cl - ). The protonated imine is neutralized by any base. The nitrile is then produced by an E2-like elimination reaction with a loss of sulfur dioxide (SO 2 ) and another chloride as the leaving groups.
Step 1: Nucleophilic attack on thionyl chloride
Step 2: Leaving group removal to reform the thionyl bond
Step 3: Deprotonation
Step 4: E2-like reaction to form a nitrile
Reactions of Nitriles
Nitriles are analogous to carbonyl groups in that they contain pi bonds, are strongly polarized, and contain electrophilic carbons.
The bond polarization of a nitrile can clearly be seen when comparing the electrostatic potential maps of an alkene, an aldehyde, and a nitrile. In the maps of the aldehyde and nitrile, the electron density in the pi bonds is pulled away from the carbon toward the electronegative oxygen and nitrogen. This gives the functional group carbons a slight positive charge making them electrophilic. In the map of the alkene, the electron density is centered on the carbon making the pi bond non-polar and the carbons not electrophilic.
The triple bond of a nitrile reacts with negatively charged nucleophiles to form an imine anion intermediate in much the same fashion that carbonyls form a tetrahedral alkoxide intermediate. Because the imine anion intermediate still contains a pi bond and an electrophilic carbon, additional nucleophilic additions can occur to form a variety of functional groups including ketones, aldehydes, and amines.
General Reactions of Nitriles
Nitriles undergo several types of reactions including hydrolysis to carboxylic acids, two different reductions with products that vary with the strength of the reducing agent and reaction with Grignard reagents that form ketones.
Hydrolysis of Nitriles to form Carboxylic Acids
One of the more useful reaction involving nitriles is their hydrolysis to form carboxylic acids. This reaction occurs in either acidc or basic aqueous solutions with slight differences in each mechanism. In the case of acid catalysis, the nitrile becomes protonated. Protonation increases the electrophilicity of the nitrile so that it will accept water, a poor nucleophile. With base catalyzed hydrolysis, the strongly nucleophilic hydroxide anion is capable of directl addition to the carbon-nitrogen triple bond. During both mechanisms an amide intermediate is formed which usually is not isolated.
Acid Catalyzed Hydrolysis of Nitriles
Example
Mechanism of Acid Catalyzed Hydrolysis
The mechanism begins with the protonation of the nitrile to promote the addition of the weakly nucleophilic water molecule to the C-N triple bond. Once water has reacted with the nitrile carbon, a proton transfer and resonance occur to produce a protonated amide. Water acts as a weak base, deprotonating the carbonyl to form an amide and regenerating the hydronium catalyst. Further hydrolysis converts the amide to the carboxylic acid. The nitrile nitrogen is eventually removed as a leaving group and eventually forms ammonium (NH 4 + )
Step 1: Protonation
Step 2: Nucleophilic addition of water
Step 3: Proton Transfer
Step 4: Resonance to form a protonated amide
Step 5: Deprotonation to form an amide
Step 6: Further hydrolysis of the amide forms a carboxylic acid. This mechanism can be found in Section 21.7
Base Catalyzed Hydrolysis of Nitriles
Example
Mechanism of Base Catalyzed Hydrolysis
Base catalyzed hydrolysis starts with the nucleophilic addition of a hydroxide ion to the C-N triple bond to form an imine anion. Subsequent protonation by water forms an amide tautomer, imidic acid, and regenerates the hydroxide catalyst. Tautomerization of imidic acid forms an amide which undergo further base catalyzed hydrolysis to form a carboxylic acid. During hydrolysis of the amide, nitrogen from the original nitrile is removed as a leaving group and eventually forms ammonium (NH 4 + )
Step 1: Nucleophilic addition of hydroxide
Step 2: Protonation by water to form an imidic acid and hydroxide
Step 3: Tautomerization of an imidic acid to form an amide
Step 4:) Further hydrolysis of the amide forms a carboxylic acid. This mechanism can be found in Section 21.7
Nitriles can be reduced to 1° amines by reaction with LiAlH 4
The reduction of nitriles with lithium aluminum hydride LiAlH 4 is an excellent method for the synthesis of primary amines. This reaction occurs via two nucleophilic additions of a hydride to the electrophilic carbon in the nitrile. Subsequent protonation with an aqueous work-up leads to the primary amine.
Predicting the Product of a Hydride Reduction
Example \(\PageIndex{1}\)
Mechanism
During this reaction the hydride nucleophile reacts with the electrophilic carbon in the nitrile to form an imine anion. The imine ion is stabilized through formation of an anionic Lewis acid-base aluminum complex. The complex is vital for the continuation of the reaction because it shifts the negative charge from the nitrogen to the aluminum allowing for the imine carbon to remain electrophilic. Because the imine-aluminum complex still contains a pi bond and an electrophilic carbon, it can undergo a second nucleophilic addition of a hydride to form a dianion. The dianion is also stabilized through the formation of an anionic Lewis acid-base aluminum complex. During the aqueous work-up, the dianion is protonated by water to form a primary amine.
Step 1: Nucleophilic Attack by the Hydride
Step 2: Second nucleophilic attack by the hydride.
Step 3: Protonation by addition of water to give a primary amine
The Conversion of Nitriles to Aldehydes by Reaction with DIBALH
The use of DIBALH as a hydride source offers an efficient method for the synthesis of aldehydes. DIBALH only contains on hydride so the addition of one equivalent to a nitrile at low temperature (-78 0 C) allows for the conversion to an aldehyde.
Predicting the Product of a Reaction with DIBALH
Example \(\PageIndex{1}\)
Mechanism of DIBALH Reduction of Nitriles
The mechanism starts with the formation of a Lewis acid-base complex which increases the electrophilic character of the nitrile's carbon. The nucleophilic addition of a hydride forms an imine anion which is also stabilized through formation of a Lewis acid-base aluminum complex. Unlike the reduction with LiAlH 4 , DIBALH only has a single hydride so a second nucleophlic addition to the imine anion does not occur. Subsequently, the imine anion undergoes hydrolysis during acidic aqueous work-up to from an aldehyde. The mechanism of imine anion hydrolysis is the reverse of an imine formation previously discussed.
Conversion of Nitriles to Ketones with Organometalic Reagents
Some organometalic species, such as Grignard reagents or organolithium reagents, undergo nucleophilic addition to the electophillic carbon of a nitrile to form an intermediate imine anion. Despite the presence of a pi bond, the negative charge of the imine anion prevents any further nucleophilic additions. During an aqueous work-up, the imine anion is hydrolyzed by water to form a ketone.
General Reaction
Predicting the Product of a Reaction with an Organometalic
Examples
Mechanism of Organometallic Addition
The mechanism begins with the nucleophilic Grignard reagent reacting with the electrophilic carbon of the nitrile to form a salt of the imine anion. The imine salt is protonated to form an imine which is subsequently protonated to form a positively charged iminium ion. After nucleophilic attack by water and a proton transfer, the nitrogen from the nitrile is removed as a leaving group in the from of ammonia (NH 3 ). This step forms a protonated ketone called a ketonium ion which is subsequently deprotonated by ammonia to the neutral ketone and ammonium (NH 4 + ).
Step 1: Nucleophilic Attack by the Grignard Reagent to form an imine anion
Step 2: Protonation to form an imine
Step 3: Protonation to form an iminium ion
Step 4: Nucleophilic attack by water
Step 5: Proton Transfer
Step 6: Removal of NH 3 as a leaving group to form a ketonium ion
7) Deprotonation to form a ketone
Planning the Synthesis of a Ketone from a Nitrile
These reactions can be employed to plan synthetic routes to desired molecules from nitriles. Because a C-C bond is formed, the reaction of an organometallic reagent with nitrile is an effective method for the synthesis of ketones. Also, asymmetrical ketones offer the possibility of two separate synthesis routes.
To plan a synthesis, we often think in reverse. Begin with the intended product (in this case the ketone). Break a C-C bond between the carbon in the carbonyl and an adjacent carbon. The fragment with the C=O becomes the nitrile starting material. The other fragment becomes either a Grignard or an organolithium reagent.
Example \(\PageIndex{1}\)
Plan a synthesis of the following molecule using the reaction of a organometallic reagent and a nitrile.
Solution
There are two possible pathways to synthesize this molecule.
Solution 1
Pathway 1)
Solution 2
Pathway 2)
Exercise \(\PageIndex{1}\)
Show how the following compounds could be prepared from a nitrile:
- Answer
-
Exercise \(\PageIndex{2}\)
Show how the following transformations could be preformed:
- Answer
-