Skip to main content
Chemistry LibreTexts

19.9: Corrosion: Undesirable Redox Reactions

  • Page ID
    84994
  • \( \newcommand{\vecs}[1]{\overset { \scriptstyle \rightharpoonup} {\mathbf{#1}} } \) \( \newcommand{\vecd}[1]{\overset{-\!-\!\rightharpoonup}{\vphantom{a}\smash {#1}}} \)\(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\) \(\newcommand{\id}{\mathrm{id}}\) \( \newcommand{\Span}{\mathrm{span}}\) \( \newcommand{\kernel}{\mathrm{null}\,}\) \( \newcommand{\range}{\mathrm{range}\,}\) \( \newcommand{\RealPart}{\mathrm{Re}}\) \( \newcommand{\ImaginaryPart}{\mathrm{Im}}\) \( \newcommand{\Argument}{\mathrm{Arg}}\) \( \newcommand{\norm}[1]{\| #1 \|}\) \( \newcommand{\inner}[2]{\langle #1, #2 \rangle}\) \( \newcommand{\Span}{\mathrm{span}}\)\(\newcommand{\AA}{\unicode[.8,0]{x212B}}\)

    Learning Objectives
    • To understand the process of corrosion.

    Corrosion is a galvanic process by which metals deteriorate through oxidation—usually but not always to their oxides. For example, when exposed to air, iron rusts, silver tarnishes, and copper and brass acquire a bluish-green surface called a patina. Of the various metals subject to corrosion, iron is by far the most important commercially. An estimated $100 billion per year is spent in the United States alone to replace iron-containing objects destroyed by corrosion. Consequently, the development of methods for protecting metal surfaces from corrosion constitutes a very active area of industrial research. In this section, we describe some of the chemical and electrochemical processes responsible for corrosion. We also examine the chemical basis for some common methods for preventing corrosion and treating corroded metals.

    Corrosion is a REDOX process.

    Under ambient conditions, the oxidation of most metals is thermodynamically spontaneous, with the notable exception of gold and platinum. Hence it is actually somewhat surprising that any metals are useful at all in Earth’s moist, oxygen-rich atmosphere. Some metals, however, are resistant to corrosion for kinetic reasons. For example, aluminum in soft-drink cans and airplanes is protected by a thin coating of metal oxide that forms on the surface of the metal and acts as an impenetrable barrier that prevents further destruction. Aluminum cans also have a thin plastic layer to prevent reaction of the oxide with acid in the soft drink. Chromium, magnesium, and nickel also form protective oxide films. Stainless steels are remarkably resistant to corrosion because they usually contain a significant proportion of chromium, nickel, or both.

    In contrast to these metals, when iron corrodes, it forms a red-brown hydrated metal oxide (\(\ce{Fe2O3 \cdot xH2O}\)), commonly known as rust, that does not provide a tight protective film (Figure \(\PageIndex{1}\)). Instead, the rust continually flakes off to expose a fresh metal surface vulnerable to reaction with oxygen and water. Because both oxygen and water are required for rust to form, an iron nail immersed in deoxygenated water will not rust—even over a period of several weeks. Similarly, a nail immersed in an organic solvent such as kerosene or mineral oil will not rust because of the absence of water even if the solvent is saturated with oxygen.

    Figure \(\PageIndex{1}\): Rust, the Result of Corrosion of Metallic Iron. Iron is oxidized to Fe2+(aq) at an anodic site on the surface of the iron, which is often an impurity or a lattice defect. Oxygen is reduced to water at a different site on the surface of the iron, which acts as the cathode. Electrons are transferred from the anode to the cathode through the electrically conductive metal. Water is a solvent for the Fe2+ that is produced initially and acts as a salt bridge. Rust (Fe2O3•xH2O) is formed by the subsequent oxidation of Fe2+ by atmospheric oxygen. (CC BY-NC-SA; anonymous)

    In the corrosion process, iron metal acts as the anode in a galvanic cell and is oxidized to Fe2+; oxygen is reduced to water at the cathode. The relevant reactions are as follows:

    • at cathode: \[\ce{O2(g) + 4H^{+}(aq) + 4e^{−} -> 2H2O(l)} \nonumber \] with \(E^o_{SRP}=1.23\; V\).
    • at anode: \[\ce{Fe(s) -> Fe^{2+}(aq) + 2e^{−}}\nonumber \] with \(E^o_{SRP} = −0.45\; V\).
    • overall: \[\ce{2Fe(s) + O2(g) + 4H^{+}(aq) -> 2Fe^{2+}(aq) + 2H2O(l)} \label{Eq3} \] with \(E^o_{cell} = 1.68\; V\).

    The \(\ce{Fe^{2+}}\) ions produced in the initial reaction are then oxidized by atmospheric oxygen to produce the insoluble hydrated oxide containing \(\ce{Fe^{3+}}\), as represented in the following equation:

    \[\ce{4Fe^{2+}(aq) + O2(g) + (2 + 4x)H2O \rightarrow 2Fe2O3 \cdot xH2O + 4H^{+}(aq)} \label{Eq4} \]

    The sign and magnitude of \(E^o_{cell}\) for the corrosion process (Equation \(\ref{Eq3}\)) indicate that there is a strong driving force for the oxidation of iron by O2 under standard conditions (1 M H+). Under neutral conditions, the driving force is somewhat less but still appreciable (E = 1.25 V at pH 7.0). Normally, the reaction of atmospheric CO2 with water to form H+ and HCO3 provides a low enough pH to enhance the reaction rate, as does acid rain. Automobile manufacturers spend a great deal of time and money developing paints that adhere tightly to the car’s metal surface to prevent oxygenated water, acid, and salt from coming into contact with the underlying metal. Unfortunately, even the best paint is subject to scratching or denting, and the electrochemical nature of the corrosion process means that two scratches relatively remote from each other can operate together as anode and cathode, leading to sudden mechanical failure (Figure \(\PageIndex{2}\)).

    Figure \(\PageIndex{2}\): Small Scratches in a Protective Paint Coating Can Lead to the Rapid Corrosion of Iron. Holes in a protective coating allow oxygen to be reduced at the surface with the greater exposure to air (the cathode), while metallic iron is oxidized to Fe2+(aq) at the less exposed site (the anode). Rust is formed when Fe2+(aq) diffuses to a location where it can react with atmospheric oxygen, which is often remote from the anode. The electrochemical interaction between cathodic and anodic sites can cause a large pit to form under a painted surface, eventually resulting in sudden failure with little visible warning that corrosion has occurred.

    Prophylactic Protection

    One of the most common techniques used to prevent the corrosion of iron is applying a protective coating of another metal that is more difficult to oxidize. Faucets and some external parts of automobiles, for example, are often coated with a thin layer of chromium using an electrolytic process. With the increased use of polymeric materials in cars, however, the use of chrome-plated steel has diminished in recent years. Similarly, the “tin cans” that hold soups and other foods are actually consist of steel container that is coated with a thin layer of tin. While neither chromium nor tin metals are intrinsically resistant to corrosion, they both form protective oxide coatings that hinder access of oxygen and water to the underlying steel (iron alloy).

    Figure \(\PageIndex{3}\): Galvanic Corrosion. If iron is in contact with a more corrosion-resistant metal such as tin, copper, or lead, the other metal can act as a large cathode that greatly increases the rate of reduction of oxygen. Because the reduction of oxygen is coupled to the oxidation of iron, this can result in a dramatic increase in the rate at which iron is oxidized at the anode. Galvanic corrosion is likely to occur whenever two dissimilar metals are connected directly, allowing electrons to be transferred from one to the other.

    As with a protective paint, scratching a protective metal coating will allow corrosion to occur. In this case, however, the presence of the second metal can actually increase the rate of corrosion. The values of the standard electrode potentials for \(\ce{Sn^{2+}}\) (E° = −0.14 V) and Fe2+ (E° = −0.45 V) in Table P2 show that \(\ce{Fe}\) is more easily oxidized than \(\ce{Sn}\). As a result, the more corrosion-resistant metal (in this case, tin) accelerates the corrosion of iron by acting as the cathode and providing a large surface area for the reduction of oxygen (Figure \(\PageIndex{3}\)). This process is seen in some older homes where copper and iron pipes have been directly connected to each other. The less easily oxidized copper acts as the cathode, causing iron to dissolve rapidly near the connection and occasionally resulting in a catastrophic plumbing failure.

    Cathodic Protection

    One way to avoid these problems is to use a more easily oxidized metal to protect iron from corrosion. In this approach, called cathodic protection, a more reactive metal such as \(\ce{Zn}\) (E° = −0.76 V for \(\ce{Zn^{2+} + 2e^{−} -> Zn}\)) becomes the anode, and iron becomes the cathode. This prevents oxidation of the iron and protects the iron object from corrosion. The reactions that occur under these conditions are as follows:

    \[ \underbrace{O_{2(g)} + 4e^− + 4H^+_{(aq)} \rightarrow 2H_2O_{(l)} }_{\text{reduction at cathode}}\label{Eq5} \]

    \[ \underbrace{Zn_{(s)} \rightarrow Zn^{2+}_{(aq)} + 2e^−}_{\text{oxidation at anode}} \label{Eq6} \]

    \[ \underbrace{ 2Zn_{(s)} + O_{2(g)} + 4H^+_{(aq)} \rightarrow 2Zn^{2+}_{(aq)} + 2H_2O_{(l)} }_{\text{overall}}\label{Eq7} \]

    The more reactive metal reacts with oxygen and will eventually dissolve, “sacrificing” itself to protect the iron object. Cathodic protection is the principle underlying galvanized steel, which is steel protected by a thin layer of zinc. Galvanized steel is used in objects ranging from nails to garbage cans.

    Crystalline surface of a hot-dip galvanized steel surface. This served both as prophylactic protection (protecting the underlying steel from the oxygen in the air) and cathodic protection (once exposed, the zinc will oxidize before the underlying steel).

    In a similar strategy, sacrificial electrodes using magnesium, for example, are used to protect underground tanks or pipes (Figure \(\PageIndex{4}\)). Replacing the sacrificial electrodes is more cost-effective than replacing the iron objects they are protecting.

    Figure \(\PageIndex{4}\): The Use of a Sacrificial Electrode to Protect Against Corrosion. Connecting a magnesium rod to an underground steel pipeline protects the pipeline from corrosion. Because magnesium (E° = −2.37 V) is much more easily oxidized than iron (E° = −0.45 V), the Mg rod acts as the anode in a galvanic cell. The pipeline is therefore forced to act as the cathode at which oxygen is reduced. The soil between the anode and the cathode acts as a salt bridge that completes the electrical circuit and maintains electrical neutrality. As Mg(s) is oxidized to Mg2+ at the anode, anions in the soil, such as nitrate, diffuse toward the anode to neutralize the positive charge. Simultaneously, cations in the soil, such as H+ or NH4+, diffuse toward the cathode, where they replenish the protons that are consumed as oxygen is reduced. A similar strategy uses many miles of somewhat less reactive zinc wire to protect the Alaska oil pipeline.
    Example \(\PageIndex{1}\)

    Suppose an old wooden sailboat, held together with iron screws, has a bronze propeller (recall that bronze is an alloy of copper containing about 7%–10% tin).

    1. If the boat is immersed in seawater, what corrosion reaction will occur? What is \(E^o°_{cell}\)?
    2. How could you prevent this corrosion from occurring?

    Given: identity of metals

    Asked for: corrosion reaction, \(E^o°_{cell}\), and preventive measures

    Strategy:
    1. Write the reactions that occur at the anode and the cathode. From these, write the overall cell reaction and calculate \(E^o°_{cell}\).
    2. Based on the relative redox activity of various substances, suggest possible preventive measures.
    Solution
    1. A According to Table P2, both copper and tin are less active metals than iron (i.e., they have higher positive values of \(E^o°_{cell}\) than iron). Thus if tin or copper is brought into electrical contact by seawater with iron in the presence of oxygen, corrosion will occur. We therefore anticipate that the bronze propeller will act as the cathode at which \(\ce{O2}\) is reduced, and the iron screws will act as anodes at which iron dissolves:
    \[\begin{align*}
    & \textrm{cathode:}
    & & \mathrm{O_2(s)} + \mathrm{4H^+(aq)}+\mathrm{4e^-}\rightarrow \mathrm{2H_2O(l)}
    & & E^\circ_{\textrm{cathode}} =\textrm{1.23 V} \\
    & \textrm{anode:}
    & & \mathrm{Fe(s)} \rightarrow \mathrm{Fe^{2+}} +\mathrm{2e^-}
    & & E^\circ_{\textrm{anode}} =-\textrm{0.45 V} \\
    & \textrm{overall:}
    & & \mathrm{2Fe(s)}+\mathrm{O_2(g)}+\mathrm{4H^+(aq)} \rightarrow \mathrm{2Fe^{2+}(aq)} +\mathrm{2H_2O(l)}
    & & E^\circ_{\textrm{overall}} =\textrm{1.68 V}
    \end{align*} \nonumber \]

    Over time, the iron screws will dissolve, and the boat will fall apart.

    1. B Possible ways to prevent corrosion, in order of decreasing cost and inconvenience, are as follows: disassembling the boat and rebuilding it with bronze screws; removing the boat from the water and storing it in a dry place; or attaching an inexpensive piece of zinc metal to the propeller shaft to act as a sacrificial electrode and replacing it once or twice a year. Because zinc is a more active metal than iron, it will act as the sacrificial anode in the electrochemical cell and dissolve (Equation \(\ref{Eq7}\)).
    Zinc sacrificial anode (rounded object screwed to underside of hull) used to prevent corrosion on the screw in a boat via cathodic protection. Image by Rémi Kaupp and used with permission.
    Exercise \(\PageIndex{1}\)

    Suppose the water pipes leading into your house are made of lead, while the rest of the plumbing in your house is iron. To eliminate the possibility of lead poisoning, you call a plumber to replace the lead pipes. He quotes you a very low price if he can use up his existing supply of copper pipe to do the job.

    1. Do you accept his proposal?
    2. What else should you have the plumber do while at your home?
    Answer a

    Not unless you plan to sell the house very soon because the \(\ce{Cu/Fe}\) pipe joints will lead to rapid corrosion.

    Answer b

    Any existing \(\ce{Pb/Fe}\) joints should be examined carefully for corrosion of the iron pipes due to the \(\ce{Pb–Fe}\) junction; the less active \(\ce{Pb}\) will have served as the cathode for the reduction of \(\ce{O2}\), promoting oxidation of the more active \(\ce{Fe}\) nearby.

    Summary

    Corrosion is a galvanic process that can be prevented using cathodic protection. The deterioration of metals through oxidation is a galvanic process called corrosion. Protective coatings consist of a second metal that is more difficult to oxidize than the metal being protected. Alternatively, a more easily oxidized metal can be applied to a metal surface, thus providing cathodic protection of the surface. A thin layer of zinc protects galvanized steel. Sacrificial electrodes can also be attached to an object to protect it.


    19.9: Corrosion: Undesirable Redox Reactions is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.

    • Was this article helpful?