# 1.5: Temperature and Rate

- Page ID
- 175004

Learning Objectives

- To understand why and how chemical reactions occur.

It is possible to use kinetics studies of a chemical system, such as the effect of changes in reactant concentrations, to deduce events that occur on a microscopic scale, such as collisions between individual particles. Such studies have led to the collision model of chemical kinetics, which is a useful tool for understanding the behavior of reacting chemical species. According to the collision model, a chemical reaction can occur only when the reactant molecules, atoms, or ions collide with more than a certain amount of kinetic energy and in the proper orientation. The collision model explains why, for example, most collisions between molecules do not result in a chemical reaction. Nitrogen and oxygen molecules in a single liter of air at room temperature and 1 atm of pressure collide about 10^{30} times per second. If every collision produced two molecules of NO, the atmosphere would have been converted to NO and then NO_{2} a long time ago. Instead, in most collisions, the molecules simply bounce off one another without reacting, much as marbles bounce off each other when they collide. The collision model also explains why such chemical reactions occur more rapidly at higher temperatures. For example, the reaction rates of many reactions that occur at room temperature approximately double with a temperature increase of only 10°C. In this section, we will use the collision model to analyze this relationship between temperature and reaction rates.

## Activation Energy

Previously, we discussed the kinetic molecular theory of gases, which showed that the average kinetic energy of the particles of a gas increases with increasing temperature. Because the speed of a particle is proportional to the square root of its kinetic energy, increasing the temperature will also increase the number of collisions between molecules per unit time. What the kinetic molecular theory of gases does not explain is why the reaction rate of most reactions approximately doubles with a 10°C temperature increase. This result is surprisingly large considering that a 10°C increase in the temperature of a gas from 300 K to 310 K increases the kinetic energy of the particles by only about 4%, leading to an increase in molecular speed of only about 2% and a correspondingly small increase in the number of bimolecular collisions per unit time.

The collision model of chemical kinetics explains this behavior by introducing the concept of **activation energy **(\(E_a\)). We will define this concept using the reaction of \(\ce{NO}\) with ozone, which plays an important role in the depletion of ozone in the ozone layer:

\[\ce{NO(g) + O_3(g) \rightarrow NO_2(g) + O_2(g)} \label{14.5.1}\]

Increasing the temperature from 200 K to 350 K causes the rate constant for this particular reaction to increase by a factor of more than 10, whereas the increase in the frequency of bimolecular collisions over this temperature range is only 30%. Thus something other than an increase in the collision rate must be affecting the reaction rate.

The reaction rate, not the rate constant, will vary with concentration. The rate constant, however, does vary with temperature. Figure \(\PageIndex{1}\) shows a plot of the rate constant of the reaction of \(\ce{NO}\) with \(\ce{O3}\) at various temperatures. The relationship is not linear but instead resembles the relationships seen in graphs of vapor pressure versus temperature. In all three cases, the shape of the plots results from a distribution of kinetic energy over a population of particles (electrons in the case of conductivity; molecules in the case of vapor pressure; and molecules, atoms, or ions in the case of reaction rates). Only a fraction of the particles have sufficient energy to overcome an energy barrier.

In the case of vapor pressure, particles must overcome an energy barrier to escape from the liquid phase to the gas phase. This barrier corresponds to the energy of the intermolecular forces that hold the molecules together in the liquid. In conductivity, the barrier is the energy gap between the filled and empty bands. In chemical reactions, the energy barrier corresponds to the amount of energy the particles must have to react when they collide. This energy threshold, called the activation energy, was first postulated in 1888 by the Swedish chemist Svante Arrhenius (1859–1927; Nobel Prize in Chemistry 1903). It is the minimum amount of energy needed for a reaction to occur. Reacting molecules must have enough energy to overcome electrostatic repulsion, and a minimum amount of energy is required to break chemical bonds so that new ones may be formed. Molecules that collide with less than the threshold energy bounce off one another chemically unchanged, with only their direction of travel and their speed altered by the collision. Molecules that are able to overcome the energy barrier are able to react and form an arrangement of atoms called the **activated complex** or the **transition state** of the reaction. The activated complex is not a reaction intermediate; it does not last long enough to be detected readily.

Any phenomenon that depends on the distribution of thermal energy in a population of particles has a nonlinear temperature dependence.

## Graphing Energy Changes during a Reaction

We can graph the energy of a reaction by plotting the potential energy of the system as the reaction progresses. Figure \(\PageIndex{2}\) shows a plot for the NO–O_{3} system, in which the vertical axis is potential energy and the horizontal axis is the reaction coordinate, which indicates the progress of the reaction with time. The activated complex is shown in brackets with an asterisk. The overall change in potential energy for the reaction (Δ*E*) is negative, which means that the reaction releases energy. (In this case, Δ*E* is −200.8 kJ/mol.) To react, however, the molecules must overcome the energy barrier to reaction (*E*_{a} is 9.6 kJ/mol). That is, 9.6 kJ/mol must be put into the system as the activation energy. Below this threshold, the particles do not have enough energy for the reaction to occur.

Part (a) in Figure \(\PageIndex{3}\) illustrates the general situation in which the products have a lower potential energy than the reactants. In contrast, part (b) in Figure \(\PageIndex{3}\) illustrates the case in which the products have a higher potential energy than the reactants, so the overall reaction requires an input of energy; that is, it is energetically uphill, and Δ*E* > 0. Although the energy changes that result from a reaction can be positive, negative, or even zero, in all cases an energy barrier must be overcome before a reaction can occur. This means that the activation energy is always positive.

For similar reactions under comparable conditions, the one with the smallest

E_{a}will occur most rapidly.

Whereas Δ*E* is related to the tendency of a reaction to occur spontaneously, *E*_{a} gives us information about the reaction rate and how rapidly the reaction rate changes with temperature. For two similar reactions under comparable conditions, the reaction with the smallest *E*_{a} will occur more rapidly.

Even when the energy of collisions between two reactant species is greater than *E*_{a}, however, most collisions do not produce a reaction. The probability of a reaction occurring depends not only on the collision energy but also on the spatial orientation of the molecules when they collide. For NO and O_{3} to produce NO_{2} and O_{2}, a terminal oxygen atom of O_{3} must collide with the nitrogen atom of NO at an angle that allows O_{3} to transfer an oxygen atom to NO to produce NO_{2} (Figure \(\PageIndex{4}\)). All other collisions produce no reaction. Because fewer than 1% of all possible orientations of NO and O_{3} result in a reaction at kinetic energies greater than *E*_{a}, most collisions of NO and O_{3} are unproductive. The fraction of orientations that result in a reaction is called the **steric factor ( p)**, and, in general, its value can range from 0 (no orientations of molecules result in reaction) to 1 (all orientations result in reaction).

## The Arrhenius Equation

Figure \(\PageIndex{5}\) shows both the kinetic energy distributions and a potential energy diagram for a reaction. The shaded areas show that at the lower temperature (300 K), only a small fraction of molecules collide with kinetic energy greater than *E*_{a}; however, at the higher temperature (500 K) a much larger fraction of molecules collide with kinetic energy greater than *E*_{a}. Consequently, the reaction rate is much slower at the lower temperature because only a relatively few molecules collide with enough energy to overcome the potential energy barrier.

For an \(A + B\) elementary reaction, all the factors that affect the reaction rate can be summarized in a single series of relationships:

\[\text{rate} = (\text{collision frequency}) \times (\text{steric factor}) \times (\text{fraction of collisions with } E > E_a )\]

where

\[\text{rate} = k[A][B] \label{14.5.2}\]

Arrhenius used these relationships to arrive at an equation that relates the magnitude of the rate constant for a reaction to the temperature, the activation energy, and the constant, \(A\), called the **frequency factor**:

\[k=Ae^{-E_{\Large a}/RT} \label{14.5.3}\]

The frequency factor is used to convert concentrations to collisions per second. Because the frequency of collisions depends on the temperature, \(A\) is actually not constant. Instead, \(A\) increases slightly with temperature as the increased kinetic energy of molecules at higher temperatures causes them to move slightly faster and thus undergo more collisions per unit time. Equation \(\ref{14.5.3}\) is known as the **Arrhenius equation** and summarizes the collision model of chemical kinetics, where \(T\) is the absolute temperature (in K) and *R* is the ideal gas constant [8.314 J/(K·mol)]. \(E_a\) indicates the sensitivity of the reaction to changes in temperature. The reaction rate with a large *E*_{a} increases rapidly with increasing temperature, whereas the reaction rate with a smaller \(E_a\) increases much more slowly with increasing temperature.

If we know the reaction rate at various temperatures, we can use the Arrhenius equation to calculate the activation energy. Taking the natural logarithm of both sides of Equation \(\ref{14.5.3}\),

\[\ln k=\ln A+\left(-\dfrac{E_{\textrm a}}{RT}\right)=\ln A+\left[\left(-\dfrac{E_{\textrm a}}{R}\right)\left(\dfrac{1}{T}\right)\right] \label{14.5.4}\]

Equation \(\ref{14.5.4}\) is the equation of a straight line, *y* = *mx* + *b*, where *y* = ln *k* and *x* = 1/*T*. This means that a plot of ln *k* versus 1/*T* is a straight line with a slope of −*E*_{a}/*R* and an intercept of ln *A*. In fact, we need to measure the reaction rate at only two temperatures to estimate *E*_{a}.

Knowing the \(E_a\) at one temperature allows us to predict the reaction rate at other temperatures. This is important in cooking and food preservation, for example, as well as in controlling industrial reactions to prevent potential disasters. The procedure for determining \(E_a\) from reaction rates measured at several temperatures is illustrated in Example \(\PageIndex{1}\).

Example \(\PageIndex{1}\)

Many people believe that the rate of a tree cricket’s chirping is related to temperature. To see whether this is true, biologists have carried out accurate measurements of the rate of tree cricket chirping (*f*) as a function of temperature (*T*). Use the data in the following table, along with the graph of ln[chirping rate] versus 1/*T* in Figure 14.5.6, to calculate \(E_a\) for the biochemical reaction that controls cricket chirping. Then predict the chirping rate on a very hot evening, when the temperature is 308 K (35°C, or 95°F).

Frequency (f; chirps/min) |
ln f |
T (K) |
1/T (K) |
---|---|---|---|

200 | 5.30 | 299 | 3.34 × 10^{−3} |

179 | 5.19 | 298 | 3.36 × 10^{−3} |

158 | 5.06 | 296 | 3.38 × 10^{−3} |

141 | 4.95 | 294 | 3.40 × 10^{−3} |

126 | 4.84 | 293 | 3.41 × 10^{−3} |

112 | 4.72 | 292 | 3.42 × 10^{−3} |

100 | 4.61 | 290 | 3.45 × 10^{−3} |

89 | 4.49 | 289 | 3.46 × 10^{−3} |

79 | 4.37 | 287 | 3.48 × 10^{−3} |

**Given:** chirping rate at various temperatures

**Asked for:** activation energy and chirping rate at specified temperature

**Strategy:**

- From the plot of ln
*f*versus 1/*T*in Figure 14.5.6, calculate the slope of the line (−*E*_{a}/*R*) and then solve for the activation energy. - Express Equation 14.5.4 in terms of
*k*_{1}and*T*_{1}and then in terms of*k*_{2}and*T*_{2}. - Subtract the two equations; rearrange the result to describe
*k*_{2}/*k*_{1}in terms of*T*_{2}and*T*_{1}. - Using measured data from the table, solve the equation to obtain the ratio
*k*_{2}/*k*_{1}. Using the value listed in the table for*k*_{1}, solve for*k*_{2}.

**Solution**

**A** If cricket chirping is controlled by a reaction that obeys the Arrhenius equation, then a plot of ln *f* versus 1/*T* should give a straight line (Figure \(\PageIndex{5}\)).

Also, the slope of the plot of ln *f* versus 1/*T* should be equal to −*E*_{a}/*R*. We can use the two endpoints in Figure \(\PageIndex{5}\) to estimate the slope:

\[\begin{align*}\textrm{slope}&=\dfrac{\Delta\ln f}{\Delta(1/T)}=\dfrac{5.30-4.37}{3.34\times10^{-3}\textrm{ K}^{-1}-3.48\times10^{-3}\textrm{ K}^{-1}}

\\&=\dfrac{0.93}{-.014\times10^{-3}\textrm{ K}^{-1}}=-6.6\times10^3\textrm{ K}\end{align*}\]

A computer best-fit line through all the points has a slope of −6.67 × 10^{3} K, so our estimate is very close. We now use it to solve for the activation energy:

\[E_{\textrm a}=-(\textrm{slope})(R)=-(-6.6\times10^3\textrm{ K})\left(\dfrac{8.314 \textrm{ J}}{\mathrm{K\cdot mol}}\right)\left(\dfrac{\textrm{1 KJ}}{\textrm{1000 J}}\right)=\dfrac{\textrm{55 kJ}}{\textrm{mol}} \nonumber\]

**B** If the activation energy of a reaction and the rate constant at one temperature are known, then we can calculate the reaction rate at any other temperature. We can use Equation 14.5.4 to express the known rate constant (*k*_{1}) at the first temperature (*T*_{1}) as follows:

Similarly, we can express the unknown rate constant (*k*_{2}) at the second temperature (*T*_{2}) as follows:

**C** These two equations contain four known quantities (*E*_{a}, *T*_{1}, *T*_{2}, and *k*_{1}) and two unknowns (*A* and *k*_{2}). We can eliminate *A* by subtracting the first equation from the second:

\[\ln k_2-\ln k_1=\left(\ln A-\dfrac{E_{\textrm a}}{RT_2}\right)-\left(\ln A-\dfrac{E_{\textrm a}}{RT_1}\right)=-\dfrac{E_{\textrm a}}{RT_2}+\dfrac{E_{\textrm a}}{RT_1} \nonumber\]

Then

\[\ln \dfrac{k_2}{k_1}=\dfrac{E_{\textrm a}}{R}\left(\dfrac{1}{T_1}-\dfrac{1}{T_2}\right) \nonumber\]

**D** To obtain the best prediction of chirping rate at 308 K (*T*_{2}), we try to choose for *T*_{1} and *k*_{1} the measured rate constant and corresponding temperature in the data table that is closest to the best-fit line in the graph. Choosing data for *T*_{1} = 296 K, where *f* = 158, and using the \(E_a\) calculated previously,

\[\ln\dfrac{k_{T_2}}{k_{T_1}}=\dfrac{E_{\textrm a}}{R}\left(\dfrac{1}{T_1}-\dfrac{1}{T_2}\right)=\dfrac{55\textrm{ kJ/mol}}{8.314\textrm{ J}/(\mathrm{K\cdot mol})}\left(\dfrac{1000\textrm{ J}}{\textrm{1 kJ}}\right)\left(\dfrac{1}{296 \textrm{ K}}-\dfrac{1}{\textrm{308 K}}\right)=0.87 \nonumber\]

Thus *k*_{308}/*k*_{296} = 2.4 and *k*_{308} = (2.4)(158) = 380, and the chirping rate on a night when the temperature is 308 K is predicted to be 380 chirps per minute.

Exercise \(\PageIndex{1A}\)

The equation for the decomposition of NO_{2} to NO and O_{2} is second order in NO_{2}:

\[\ce{2NO2(g) → 2NO(g) + O2(g)} \nonumber\]

Data for the reaction rate as a function of temperature are listed in the following table. Calculate \(E_a\) for the reaction and the rate constant at 700 K.

T (K) |
k (M^{−1}·s^{−1}) |
---|---|

592 | 522 |

603 | 755 |

627 | 1700 |

652 | 4020 |

656 | 5030 |

**Answer**-
\(E_a\) = 114 kJ/mol;

*k*_{700}= 18,600 M^{−1}·s^{−1}= 1.86 × 10^{4}M^{−1}·s^{−1}.

Exercise \(\PageIndex{1B}\)

What \(E_a\) results in a doubling of the reaction rate with a 10°C increase in temperature from 20° to 30°C?

**Answer**-
about 51 kJ/mol

## Summary

For a chemical reaction to occur, an energy threshold must be overcome, and the reacting species must also have the correct spatial orientation. The **Arrhenius equation is** \(k=Ae^{-E_{\Large a}/RT}\). A minimum energy (activation energy,*E*_{a}) is required for a collision between molecules to result in a chemical reaction. Plots of potential energy for a system versus the reaction coordinate show an energy barrier that must be overcome for the reaction to occur. The arrangement of atoms at the highest point of this barrier is the activated complex, or transition state, of the reaction. At a given temperature, the higher the *E*_{a}, the slower the reaction. The fraction of orientations that result in a reaction is the steric factor. The frequency factor, steric factor, and activation energy are related to the rate constant in the Arrhenius equation: \(k=Ae^{-E_{\Large a}/RT}\). A plot of the natural logarithm of *k* versus 1/*T* is a straight line with a slope of −*E*_{a}/*R*.