# Chapter 10.3: Naming Ionic Compounds

 Prince George's Community College General Chemistry for Engineering CHM 2000 Unit I: Atoms      Unit II: Molecules     Unit III: States of Matter     Unit IV: Reactions     Unit V: Kinetics & Equilibrium Unit VI: Thermo & Electrochemistry     Unit VII: Nuclear Chemistry

Learning Objective

• To name ionic compounds.

The empirical and molecular formulas discussed in the preceding section are precise and highly informative, but they have some disadvantages. First, they are inconvenient for routine verbal communication. For example, saying “C-A-three-P-O-four-two” for Ca3(PO4)2 is much more difficult than saying “calcium phosphate.” In addition, many compounds, especially organic compounds, have the same empirical and molecular formulas but different arrangements of atoms, which result in very different chemical and physical properties. In such cases, it is necessary for the compounds to have different names that distinguish among the possible arrangements.

Many compounds, particularly those that have been known for a relatively long time, have more than one name: a common name (sometimes more than one) and a systematic name, which is the name assigned by adhering to specific rules. Like the names of most elements, the common names of chemical compounds generally have historical origins, although they often appear to be unrelated to the compounds of interest. For example, the systematic name for KNO3 is potassium nitrate, but its common name is saltpeter.

In this text, we use a systematic nomenclature to assign meaningful names to the millions of known substances. Unfortunately, some chemicals that are widely used in commerce and industry are still known almost exclusively by their common names; in such cases, you must be familiar with the common name as well as the systematic one. The objective of this and the next two sections is to teach you to write the formula for a simple inorganic compound from its name—and vice versa—and introduce you to some of the more frequently encountered common names.

We begin with binary ionic compounds, which contain only two elements. The procedure for naming such compounds is outlined in Figure 10.3.1 and uses the following steps:

Figure 10.3.1 Naming an Ionic Compound

1. Place the ions in their proper order: cation and then anion.
2. Name the cation.

1. Metals that form only one cation. As noted in Section 3.3 , these metals are usually in groups 1–3, 12, and 13. The name of the cation of a metal that forms only one cation is the same as the name of the metal (with the word ion added if the cation is by itself). For example, Na+ is the sodium ion, Ca2+ is the calcium ion, and Al3+ is the aluminum ion.
2. Metals that form more than one cation. As shown in Figure 10.3.2, many metals can form more than one cation. This behavior is observed for most transition metals, many actinides, and the heaviest elements of groups 13–15. We have discussed the reasons for this. In particular, transition metals tend to lose electrons in the ns orbitals before they lose electrons in the (n-1)d orbitals. In such cases, the positive charge on the metal is indicated by a roman numeral in parentheses immediately following the name of the metal. Thus Cu+ is copper(I) (read as “copper one”), Fe2+ is iron(II), Fe3+ is iron(III), Sn2+ is tin(II), and Sn4+ is tin(IV).

An older system of nomenclature for such cations is still widely used, however. The name of the cation with the higher charge is formed from the root of the element’s Latin name with the suffix -ic attached, and the name of the cation with the lower charge has the same root with the suffix -ous. The names of Fe3+, Fe2+, Sn4+, and Sn2+ are therefore ferric, ferrous, stannic, and stannous, respectively. Even though this text uses the systematic names with roman numerals, you should be able to recognize these common names because they are still often used. For example, on the label of your dentist’s fluoride rinse, the compound chemists call tin(II) fluoride is usually listed as stannous fluoride.

Some examples of metals that form more than one cation are in Table 10.3.1 along with the names of the ions. Note that the simple Hg+ cation does not occur in chemical compounds. Instead, all compounds of mercury(I) contain a dimeric cation, Hg22+, in which the two Hg atoms are bonded together.

Table 10.3.1 Common Cations of Metals That Form More Than One Ion

Cation Systematic Name Common Name Cation Systematic Name Common Name
Cr2+ chromium(II) chromous Cu2+ copper(II) cupric
Cr3+ chromium(III) chromic Cu+ copper(I) cuprous
Mn2+ manganese(II) manganous* Hg2+ mercury(II) mercuric
Mn3+ manganese(III) manganic* Hg22+ mercury(I) mercurous
Fe2+ iron(II) ferrous Sn4+ tin(IV) stannic
Fe3+ iron(III) ferric Sn2+ tin(II) stannous
Co2+ cobalt(II) cobaltous* Pb4+ lead(IV) plumbic*
Co3+ cobalt(III) cobaltic* Pb2+ lead(II) plumbous*
* Not widely used.
The isolated mercury(I) ion exists only as the gaseous ion.
3. Polyatomic cations. The names of the common polyatomic cations that are relatively important in ionic compounds (such as, the ammonium ion) are in Table 10.2.1
3. Name the anion.

1. Monatomic anions. Monatomic anions are named by adding the suffix -ide to the root of the name of the parent element; thus, Cl is chloride, O2− is oxide, P3− is phosphide, N3− is nitride (also called azide), and C4− is carbide. Because the charges on these ions can be predicted from their position in the periodic table, it is not necessary to specify the charge in the name. Examples of monatomic anions are in Table 10.1.2.
2. Polyatomic anions. Polyatomic anions typically have common names that you must learn; some examples are in Table 10.2.1 . Polyatomic anions that contain a single metal or nonmetal atom plus one or more oxygen atoms are called oxoanions (or oxyanions). In cases where only two oxoanions are known for an element, the name of the oxoanion with more oxygen atoms ends in -ate, and the name of the oxoanion with fewer oxygen atoms ends in -ite. For example, NO3− is nitrate and NO2− is nitrite.

The halogens and some of the transition metals form more extensive series of oxoanions with as many as four members. In the names of these oxoanions, the prefix per- is used to identify the oxoanion with the most oxygen (so that ClO4 is perchlorate and ClO3 is chlorate), and the prefix hypo- is used to identify the anion with the fewest oxygen (ClO2 is chlorite and ClO is hypochlorite). The relationship between the names of oxoanions and the number of oxygen atoms present is diagrammed in Figure 10.3.3. Differentiating the oxoanions in such a series is no trivial matter. For example, the hypochlorite ion is the active ingredient in laundry bleach and swimming pool disinfectant, but compounds that contain the perchlorate ion can explode if they come into contact with organic substances.

4. Write the name of the compound as the name of the cation followed by the name of the anion.

It is not necessary to indicate the number of cations or anions present per formula unit in the name of an ionic compound because this information is implied by the charges on the ions. You must consider the charge of the ions when writing the formula for an ionic compound from its name, however. Because the charge on the chloride ion is −1 and the charge on the calcium ion is +2, for example, consistent with their positions in the periodic table, simple arithmetic tells you that calcium chloride must contain twice as many chloride ions as calcium ions to maintain electrical neutrality. Thus the formula is CaCl2. Similarly, calcium phosphate must be Ca3(PO4)2 because the cation and the anion have charges of +2 and −3, respectively. The best way to learn how to name ionic compounds is to work through a few examples, referring to Figure 10.3.1, Table 10.1.2, Table 10.2.1, and Table 10.3.1 as needed.

Figure 10.3.2 Metals That Form More Than One Cation and Their Locations in the Periodic Table With only a few exceptions, these metals are usually transition metals or actinides.

Figure 10.3.3 The Relationship between the Names of Oxoanions and the Number of Oxygen Atoms Present

## Note the Pattern

Cations are always named before anions.

Most transition metals, many actinides, and the heaviest elements of groups 13–15 can form more than one cation.

## Example 10.3.1

Write the systematic name (and the common name if applicable) for each ionic compound.

1. LiCl
2. MgSO4
3. (NH4)3PO4
4. Cu2O

Given: empirical formula

Strategy:

A If only one charge is possible for the cation, give its name, consulting Table 10.1.2 or Table 10.2.1 if necessary. If the cation can have more than one charge (Table 10.3.1), specify the charge using roman numerals.

B If the anion does not contain oxygen, name it according to step 3a, using Table 10.1.2 and Table 10.3.1 if necessary. For polyatomic anions that contain oxygen, use Table 10.2.1 and the appropriate prefix and suffix listed in step 3b.

C Beginning with the cation, write the name of the compound.

Solution:

1. A B Lithium is in group 1, so we know that it forms only the Li+ cation, which is the lithium ion. Similarly, chlorine is in group 7, so it forms the Cl anion, which is the chloride ion. C Because we begin with the name of the cation, the name of this compound is lithium chloride, which is used medically as an antidepressant drug.
2. A B The cation is the magnesium ion, and the anion, which contains oxygen, is sulfate. C Because we list the cation first, the name of this compound is magnesium sulfate. A hydrated form of magnesium sulfate (MgSO4·7H2O) is sold in drugstores as Epsom salts, a harsh but effective laxative.
3. A B The cation is the ammonium ion (from Table 10.2.1), and the anion is phosphate. C The compound is therefore ammonium phosphate, which is widely used as a fertilizer. It is not necessary to specify that the formula unit contains three ammonium ions because three are required to balance the negative charge on phosphate.
4. A B The cation is a transition metal that often forms more than one cation (Table 10.3.1). We must therefore specify the positive charge on the cation in the name: copper(I) or, according to the older system, cuprous. The anion is oxide. C The name of this compound is copper(I) oxide or, in the older system, cuprous oxide. Copper(I) oxide is used as a red glaze on ceramics and in antifouling paints to prevent organisms from growing on the bottoms of boats.

Cu2O. The bottom of a boat is protected with a red antifouling paint containing copper(I) oxide, Cu2O.

Exercise

Write the systematic name (and the common name if applicable) for each ionic compound.

1. CuCl2
2. MgCO3
3. FePO4

1. copper(II) chloride (or cupric chloride)
2. magnesium carbonate
3. iron(III) phosphate (or ferric phosphate)

## Example 10.3.2

Write the formula for each compound.

1. calcium dihydrogen phosphate
2. aluminum sulfate
3. chromium(III) oxide

Given: systematic name

Strategy:

A Identify the cation and its charge using the location of the element in the periodic table and Table 10.1.2 Table 10.2.1 , and Table 10.3.1. If the cation is derived from a metal that can form cations with different charges, use the appropriate roman numeral or suffix to indicate its charge.

B Identify the anion using Table 10.1.2 and Table 10.2.1 Beginning with the cation, write the compound’s formula and then determine the number of cations and anions needed to achieve electrical neutrality.

Solution:

1. A Calcium is in group 2, so it forms only the Ca2+ ion. B Dihydrogen phosphate is the $$H_2PO_4^−$$ ion (Table 10.2.1 ). Two $$H_2PO_4^−$$ ions are needed to balance the positive charge on Ca2+, to give Ca(H2PO4)2. A hydrate of calcium dihydrogen phosphate, Ca(H2PO4)2·H2O, is the active ingredient in baking powder.
2. A Aluminum, near the top of group 13 in the periodic table, forms only one cation, Al3+ (Figure 10.3.2). B Sulfate is SO42− (Table 10.2.1). To balance the electrical charges, we need two $$Al^{3+}$$ cations and three $$SO_4^{2−}$$ anions, giving Al2(SO4)3. Aluminum sulfate is used to tan leather and purify drinking water.
3. A Because chromium is a transition metal, it can form cations with different charges. The roman numeral tells us that the positive charge in this case is +3, so the cation is $$Cr^{3+}$$. B Oxide is $$O^{2−}$$. Thus two cations ($$Cr^{3+}$$) and three anions ($$O^{2−}$$) are required to give an electrically neutral compound, $$Cr_2O_3$$. This compound is a common green pigment that has many uses, including camouflage coatings.

Chromium(III) oxide ($$Cr_2O_3$$) is a common pigment in dark green paints, such as camouflage paint. Figure used with permission from Wikipedia

Exercise

Write the formula for each compound.

1. barium chloride
2. sodium carbonate
3. iron(III) hydroxide

1. BaCl2
2. Na2CO3
3. Fe(OH)3

## Summary

Ionic compounds are named according to systematic procedures, although common names are widely used. Systematic nomenclature enables us to write the structure of any compound from its name and vice versa. Ionic compounds are named by writing the cation first, followed by the anion. If a metal can form cations with more than one charge, the charge is indicated by roman numerals in parentheses following the name of the metal. Oxoanions are polyatomic anions that contain a single metal or nonmetal atom and one or more oxygen atoms.

## Key Takeaway

• There is a systematic method used to name ionic compounds.

## Conceptual Problems

1. Name each cation.

1. K+
2. Al3+
3. NH4+
4. Mg2+
5. Li+
2. Name each anion.

1. Br
2. CO32−
3. S2−
4. NO3
5. HCO2
6. F
7. ClO
8. C2O42−
3. Name each anion.

1. PO43−
2. Cl
3. SO32−
4. CH3CO2
5. HSO4
6. ClO4
7. NO2
8. O2−
4. Name each anion.

1. SO42−
2. CN
3. Cr2O72−
4. N3−
5. OH
6. I
7. O22−
5. Name each compound.

1. MgBr2
2. NH4CN
3. CaO
4. KClO3
5. K3PO4
6. NH4NO2
7. NaN3
6. Name each compound.

1. NaNO3
2. Cu3(PO4)2
3. NaOH
4. Li4C
5. CaF2
6. NH4Br
7. MgCO3
7. Name each compound.

1. RbBr
2. Mn2(SO4)3
3. NaClO
4. (NH4)2SO4
5. NaBr
6. KIO3
7. Na2CrO4
8. Name each compound.

1. NH4ClO4
2. SnCl4
3. Fe(OH)2
4. Na2O
5. MgCl2
6. K2SO4
7. RaCl2
9. Name each compound.

1. KCN
2. LiOH
3. CaCl2
4. NiSO4
5. NH4ClO2
6. LiClO4
7. La(CN)3

1. rubidium bromide
2. manganese(III) sulfate
3. sodium hypochlorite
4. ammonium sulfate
5. sodium bromide
6. potassium iodate
7. sodium chromate

## Numerical Problems

1. For each ionic compound, name the cation and the anion and give the charge on each ion.

1. BeO
2. Pb(OH)2
3. BaS
4. Na2Cr2O7
5. ZnSO4
6. KClO
7. NaH2PO4
2. For each ionic compound, name the cation and the anion and give the charge on each ion.

1. Zn(NO3)2
2. CoS
3. BeCO3
4. Na2SO4
5. K2C2O4
6. NaCN
7. FeCl2
3. Write the formula for each compound.

1. magnesium carbonate
2. aluminum sulfate
3. potassium phosphate
5. silicon nitride
6. sodium hypochlorite
7. titanium(IV) chloride
8. disodium ammonium phosphate
4. Write the formula for each compound.

2. ammonium phosphate
3. silver sulfide
4. barium sulfate
5. cesium iodide
6. sodium bicarbonate
7. potassium dichromate
8. sodium hypochlorite
5. Write the formula for each compound.

1. zinc cyanide
2. silver chromate
4. benzene
5. copper(II) perchlorate
6. Write the formula for each compound.

1. calcium fluoride
2. sodium nitrate
3. iron(III) oxide
4. copper(II) acetate
5. sodium nitrite
7. Write the formula for each compound.

1. sodium hydroxide
2. calcium cyanide
3. magnesium phosphate
4. sodium sulfate
5. nickel(II) bromide
6. calcium chlorite
7. titanium(IV) bromide
8. Write the formula for each compound.

1. sodium chlorite
2. potassium nitrite
3. sodium nitride (also called sodium azide)
4. calcium phosphide
5. tin(II) chloride
6. calcium hydrogen phosphate
7. iron(II) chloride dihydrate
9. Write the formula for each compound.

1. potassium carbonate
2. chromium(III) sulfite
3. cobalt(II) phosphate
4. magnesium hypochlorite
5. nickel(II) nitrate hexahydrate

## Contributors

• Anonymous

Modified by Joshua Halpern, Scott Sinex and Scott Johnson