29.6: The Lindemann Mechanism
 Page ID
 14557
The Lindemann mechanism, sometimes called the LindemannHinshelwood mechanism, is a schematic reaction mechanism. Frederick Lindemann discovered the concept in 1921 and Cyril Hinshelwood developed it. It breaks down a stepwise reaction into two or more elementary steps, then it gives a rate constant for each elementary step. The rate law and rate equation for the entire reaction can be derived from this information. Lindemann mechanisms have been used to model gas phase decomposition reactions. Although the net formula for a decomposition may appear to be firstorder (unimolecular) in the reactant, a Lindemann mechanism may show that the reaction is actually secondorder (bimolecular).
A Lindemann mechanism typically includes an activated reaction intermediate, labeled A* (where A can be any element or compound). The activated intermediate is produced from the reactants only after a sufficient activation energy is applied. It then either deactivates from A* back to A, or reacts with another (dis)similar reagent to produce yet another reaction intermediate or the final product.
General Mechanism
The schematic reaction \(A + M \rightarrow P\) is assumed to consist of two elementary steps:
STEP 1: Bimolecular activation of \(A\)
\[A + M \rightleftharpoons A^* + M \label{1}\]
with
 forward activation reaction rate: \(k_1\)
 reverse deactivation reaction rate: \(k_{1}\)
STEP 2: Unimolecular reaction of \(A*\)
\[A^* \overset{k_2}{\rightarrow} P \label{2}\]
with

forward reaction rate: \(k_2\)
Assuming that the concentration of intermediate \(A^*\) is held constant according to the quasi steadystate approximation, what is the rate of formation of product \(P\)?
SOLUTION
First, find the rates of production and consumption of intermediate \(A^*\). The rate of production of \(A^*\) in the first elementary step (Equation \(\ref{1}\)) and \(A^*\) is consumed both in the reverse first step and in the forward second step. The respective rates of consumption of \(A^*\) are:
\[\dfrac{d[A^*]}{dt} = \underset{\text{(forward first step)}}{k_1 [A] [M]}  \underset{\text{(reverse first step)}}{k_{1} [A^*] [M]}  \underset{\text{(forward second step)}}{k_2 [A^*]} \label{3}\]
According to the steadystate approximation,
\[\dfrac{d[A^*]}{dt} \approx 0 \label{4}\]
Therefore the rate of production of \(A^*\) (first term in Equation \(\ref{3}\)) equals the rate of consumption (second and third terms in Equation \(\ref{3}\)):
\[k_1 [A] [M] = k_{1} [A^*] [M] + k_2 [A^*] \label{6}\]
Solving for \([A^*]\), it is found that
\[[A^*] = \dfrac{k_1 [A] [M]}{k_{1} [M] + k_2} \label{7}\]
The overall reaction rate is (Equation \(\ref{2}\))
\[\dfrac{d[P]}{dt} = k_2 [A^*] \label{8}\]
Now, by substituting the calculated value for \([A^*]\) (Equation \(\ref{7}\) into Equation \(\ref{8}\)), the overall reaction rate can be expressed in terms of the original reactants \(A\) and \(M\) as follows:
\[\dfrac{d[P]}{dt} = \dfrac{k_1k_2 [A] [M]}{k_{1} [M] + k_2} \label{9}\]
The rate law for the Lindemann mechanism is not a simple first or second order reaction. However, under certain conditions (discussed below), Equation \(\ref{9}\) can be simplified.
Three Principles of the Lindemann Mechanism
 Energy is transferred by collision (forward reaction of Equation \(\ref{1}\))
 There is a time delay \(\Delta t\) between collision and reaction (Equation \(\ref{2}\))
 Molecules may be deactivated by another collision during \(\Delta t\) (reverse reaction of Equation \(\ref{1}\))
Example \(\PageIndex{1}\): Dissociation of \(N_2O_5\)
The decomposition of dinitrogen pentoxide to nitrogen dioxide and nitrogen trioxide
\[N_2O_5 \rightarrow NO_2 + NO_3 \nonumber\]
is postulated to take place via two elementary steps, which are similar in form to the schematic example given above:
 \(N_2O_5 + N_2O_5 \rightleftharpoons N_2O_5^* + N_2O_5\)
 \(N_2O_5^* \rightarrow NO_2 + NO_3\)
Using the quasi steadystate approximation soluioten (Equation 9) with \([M]=[N_2O_5]\), then rate equation is:
\[\text{Rate} = k_2 [N_2O_5]^* = \dfrac{k_1k_2 [N_2O_5]^2}{k_{1}[N_2O_5] + k_2} \nonumber\]
Experiment has shown that the rate is observed as firstorder in the original concentration of \(N_2O_5\) sometimes, and second order at other times.
 If \(k_2 >> k_{1}\), then the rate equation may be simplified by assuming that \(k_{1} \approx 0\). Then the rate equation is \[\text{Rate} = k_1[N_2O_5]^2\] which is second order.
 If \(k_2 << k_{1}\), then the rate equation may be simplified by assuming \(k_2 \approx 0\). Then the rate equation is \[\text{Rate} = \dfrac{k_1k_2[N_2O_5] }{k_{1}} = k_{obs} [N_2O_5] \nonumber\] which is first order with \[k_{obs} = \dfrac{k_2k_2}{k_{1}}. \nonumber\]
Exercise \(\PageIndex{1}\)
The following first order rate constants for the gas phase decomposition of \(N_2O_5\) have been obtained as a function of number density at 298 K.
\(k_{obs} (s^{1})\)  \(7.81 \times 10^{3}\)  \(12.5 \times 10^{3}\)  \(15.6 \times 10^{3}\) 

\([N_2O_5] (mol/m^{3})\)  10  25  50 
Confirm that these data are consistent with the Lindemann mechanism and derive a rate constant and a ratio of two rate constants for elementary reactions in the mechanism. What are the units of the two quantities.
Lindemann Mechanism
Consider the isomerization of methylisonitrile gas, \(CH_3 NC\), to acetonitrile gas, \(CH_3 CN\):
\[CH_3 NC \overset{k}{\longrightarrow} CH_3 CN\]
If the isomerization is a unimolecular elementary reaction, we should expect to see \(1^{st}\) order rate kinetics. Experimentally, however, \(1^{st}\) order rate kinetics are only observed at high pressures. At low pressures, the reaction kinetics follow a \(2^{nd}\) order rate law:
\[\dfrac{d \left[ CH_3 NC \right]}{dt} = k \left[ CH_3 NC \right]^2 \label{21.30}\]
To explain this observation, J.A. Christiansen and F.A. Lindemann proposed that gas molecules first need to be energized via intermolecular collisions before undergoing an isomerization reaction. The reaction mechanism can be expressed as the following two elementary reactions
\[\begin{align} \text{A} + \text{M} &\overset{k_1}{\underset{k_{1}}{\rightleftharpoons}} \text{A}^* + \text{M} \\ \text{A}^* &\overset{k_2}{\rightarrow} \text{B} \end{align}\]
where \(\text{M}\) can be a reactant molecule, a product molecule or another inert molecule present in the reactor. Assuming that the concentration of \(\text{A}^*\) is small, or \(k_1 \ll k_2 + k_{1}\), we can use a steadystate approximation to solve for the concentration profile of species \(\text{B}\) with time:
\[\dfrac{d \left[ \text{A}^* \right]}{dt} = k_1 \left[ \text{A} \right] \left[ \text{M} \right]  k_{1} \left[ \text{A}^* \right]_{ss} \left[ \text{M} \right]  k_2 \left[ \text{A}^* \right]_{ss} \approx 0 \label{21.31}\]
Solving for \(\left[ \text{A}^* \right]\),
\[\left[ \text{A}^* \right] = \dfrac{k_1 \left[ \text{M} \right] \left[ \text{A} \right]}{k_2 + k_{1} \left[ \text{M} \right]} \label{21.32}\]
The reaction rates of species \(\text{A}\) and \(\text{B}\) can be written as
\[\dfrac{d \left[ \text{A} \right]}{dt} = \dfrac{d \left[ \text{B} \right]}{dt} = k_2 \left[ \text{A}^* \right] = \dfrac{k_1 k_2 \left[ \text{M} \right] \left[ \text{A} \right]}{k_2 + k_{1} \left[ \text{M} \right]} = k_\text{obs} \left[ \text{A} \right] \label{21.33}\]
where
\[k_\text{obs} = \dfrac{k_1 k_2 \left[ \text{M} \right]}{k_2 + k_{1} \left[ \text{M} \right]} \label{21.34}\]
At high pressures, we can expect collisions to occur frequently, such that \(k_{1} \left[ \text{M} \right] \gg k_2\). Equation \(\ref{21.33}\) then becomes
\[\dfrac{d \left[ \text{A} \right]}{dt} = \dfrac{k_1 k_2}{k_{1}} \left[ \text{A} \right] \label{21.35}\]
which follows \(1^{st}\) order rate kinetics.
At low pressures, we can expect collisions to occurs infrequently, such that \(k_{1} \left[ \text{M} \right] \ll k_2\). In this scenario, Equation \(\ref{21.33}\) becomes
\[\dfrac{d \left[ \text{A} \right]}{dt} = k_1 \left[ \text{A} \right] \left[ \text{M} \right] \label{21.36}\]
which follows second order rate kinetics, consistent with experimental observations.
References
 The content of this page is sourced from World Heritage Encyclopedia and licensed differently than most of the content in the Libretexts under a CC BYSA 3.0 license.