5.9: The Rigid Rotator is a Model for a Rotating Diatomic Molecule
 Page ID
 13423
To develop a description of the rotational states, we will consider the molecule to be a rigid object, i.e. the bond lengths are fixed and the molecule cannot vibrate. This model for rotation is called the rigidrotor model. It is a good approximation (even though a molecule vibrates as it rotates, and the bonds are elastic rather than rigid) because the amplitude of the vibration is small compared to the bond length.
The rotation of a rigid object in space is very simple to visualize. Pick up any object and rotate it. There are orthogonal rotations about each of the three Cartesian coordinate axes just as there are orthogonal translations in each of the directions in threedimensional space (Figures \(\PageIndex{1}\) and \(\PageIndex{2}\)). These rotations are said to be orthogonal because one can not describe a rotation about one axis in terms of rotations about the other axes just as one can not describe a translation along the xaxis in terms of translations along the y and zaxes. For a linear molecule, the motion around the interatomic axis (xaxis) is not considered a rotation.
Figure \(\PageIndex{1}\): Cartesian rotations of a chair. Rotations about the (a) x axis, (b) y axis, and (c) z axis.
In this section we examine the rotational states for a diatomic molecule by comparing the classical interpretation of the angular momentum vector with the probabilistic interpretation of the angular momentum wavefunctions. We want to answer the following types of questions. How do we describe the orientation of a rotating diatomic molecule in space? Is the molecule actually rotating? What properties of the molecule can be physically observed? In what ways does the quantum mechanical description of a rotating molecule differ from the classical image of a rotating molecule?
Figure \(\PageIndex{2}\): Rotation of a diatomic molecule about the x axis.
Introduction to Microwave Spectroscopy
The permanent electric dipole moments of polar molecules can couple to the electric field of electromagnetic radiation. This coupling induces transitions between the rotational states of the molecules. The energies that are associated with these transitions are detected in the far infrared and microwave regions of the spectrum. For example, the microwave spectrum for carbon monoxide spans a frequency range of 100 to 1200 GHz, which corresponds to 3  40 \(cm^{1}\).
The selection rules for the rotational transitions are derived from the transition moment integral by using the spherical harmonic functions and the appropriate dipole moment operator, \(\hat {\mu}\).
\[ \mu _T = \int Y_{J_f}^{m_f*} \hat {\mu} Y_{J_i}^{m_i} \sin \theta \,d \theta\, d \varphi \label{5.9.1a} \]
or in braket notation
\[\langle Y_{J_f}^{m_f}  \hat {\mu}  Y_{J_i}^{m_i} \rangle \label{5.9.1b}\]
Evaluating the transition moment integral involves a bit of mathematical effort. This evaluation reveals that the transition moment depends on the square of the dipole moment of the molecule, \(\mu ^2\) and the rotational quantum number, \(J\), of the initial state in the transition,
\[\mu _T = \mu ^2 \dfrac {J + 1}{2J + 1} \label {5.9.2}\]
and that the selection rules for rotational transitions are
\[\Delta J = \pm 1 \label {5.9.3}\]
and
\[\Delta m_J = 0, \pm 1 \label {5.9.4}\]
A photon is absorbed For \(\Delta J = +1\) and emitted for \(\Delta J = 1\).
Exercise \(\PageIndex{1}\)
Explain why your microwave oven heats water, but not air. Hint: draw and compare Lewis structures for components of air and for water.
The energies of the rotational levels are given by
\[E = J(J + 1) \dfrac {\hbar ^2}{2I} \]
and each energy level has a degeneracy of \(2J+l\) due to the different \(m_J\) values.
Degeneracy of the Rotational Eigenstates
Each energy level of a rigid rotor has a degeneracy of \(2J+1\) due to the different \(m_J\) values.
Transition Energies
The transition energies for absorption of radiation are given by
\[E_{photon} = \Delta E_{states} = E_f  E_i = h \nu = hc \bar {\nu} \label {5.9.5}\]
\[h \nu =hc \bar {\nu} = J_f (J_f +1) \dfrac {\hbar ^2}{2I}  J_i (J_i +1) \dfrac {\hbar ^2}{2I} \label {5.9.6}\]
Since microwave spectroscopists use frequency, and infrared spectroscopists use wavenumber units when describing rotational spectra and energy levels, both \(\nu\) and \(\bar {\nu}\) are included in Equation \(\ref{5.9.6}\), and \(J_i\) and \(J_f\) are the rotational quantum numbers of the initial (lower) and final (upper) levels involved in the absorption transition. When we add in the constraints imposed by the selection rules, \(J_f\) is replaced by \(J_i + 1\), because the selection rule requires \(J_f – J_i = 1\) for absorption. The equation for absorption transitions then can be written in terms of the quantum number \(J_i\) of the initial level alone.
\[h \nu = hc \bar {\nu} = 2 (J_i + 1) \dfrac {\hbar ^2}{2I} \label {5.9.7}\]
Divide Equation \(\ref{5.9.7}\) by \(h\) to obtain the frequency of the allowed transitions,
\[ \nu = 2B (J_i + 1) \label {5.9.8}\]
where \(B\), the rotational constant for the molecule, is defined as
\[B = \dfrac {\hbar ^2}{2I} \label {5.9.9}\]
Exercise \(\PageIndex{2}\)
Construct a rotational energy level diagram for \(J = 0\), \(1\), and \(2\) and add arrows to show all the allowed transitions between states that cause electromagnetic radiation to be absorbed or emitted.
Exercise \(\PageIndex{3}\)
Complete the steps going from Equation \(\ref{5.9.6}\) to Equation \(\ref{5.9.9}\) and identify the units of \(B\) at the end.
Exercise \(\PageIndex{4}\)
Infrared spectroscopists use units of wavenumbers. Rewrite the steps going from Equation \(\ref{5.9.6}\) to Equation \(\ref{5.9.9}\) to obtain expressions for \(\hbar {\nu}\) and \(B\) in units of wavenumbers. Note that to convert \(B\) in Hz to \(B\) in \(cm^{1}\), you simply divide the former by \(c\).
Figure \(\PageIndex{3}\): The rotation spectrum of \(^{12}C^{16}O\) at 40 K. The peaks are tabulated in Table \(\PageIndex{1}\).
Figure \(\PageIndex{3}\) shows the rotational spectrum as a series of nearly equally spaced lines. The line positions \(\nu _J\), line spacings, and the maximum absorption coefficients ( \(\gamma _{max}\), the absorption coefficients associated with the specified line position) for each line in this spectrum are given here in Table \(\PageIndex{1}\).













































Let’s try to reproduce Figure \(\PageIndex{3}\) from the data in Table \(\PageIndex{1}\) by using the quantum theory that we have developed so far. Equation \(\ref{5.9.8}\) predicts a pattern of exactly equally spaced lines. The lowest energy transition is between \(J_i = 0\) and \(J_f = 1\) so the first line in the spectrum appears at a frequency of \(2B\). The next transition is from \(J_i = 1\) to \(J_f = 2\) so the second line appears at \(4B\). The spacing of these two lines is \(2B\). In fact the spacing of all the lines is \(2B\), which is consistent with the experimental data in Table \(\PageIndex{1}\) showing that the lines are very nearly equally spaced. The difference between the first spacing and the last spacing is less than 0.2%.
Figure \(\PageIndex{4}\): Energy levels and line positions calculated in the rigid rotor approximation. Image used with permission from Wikipedia.
Exercise \(\PageIndex{5}\)
Use Equation \(\ref{5.9.8}\) to prove that the spacing of any two lines in a rotational spectrum is \(2B\), i.e. derive:
\[\nu _{J_i + 1}  \nu _{J_i} = 2B \nonumber\]
Example \(\PageIndex{1}\)
The molecule \(NaH\) undergoes a rotational transition from \(J=0\) to \(J=1\) when it absorbs a photon of frequency \(2.94 \times 10^{11} \ Hz\). What is the equilibrium bond length of the molecule?
SOLUTION
We use \(J=0\) in the formula for the transition frequency
Solving for \(R_e\) gives
The reduced mass is given by
\[\begin{align*}\mu &= \dfrac{m_{Na}m_H}{m_{Na}+m_H}=\dfrac{(22.989)(1.0078)}{22.989+1.0078}\\ &=0.9655\end{align*} \nonumber\]
which is in atomic mass units or relative units. To convert to kilograms, we need the conversion factor \(1 \ au = 1.66\times 10^{27} \ kg\). Multiplying this by \(0.9655\) gives a reduced mass of \(1.603\times 10^{27} \ kg\). Substituting in for \(R_e\) gives
\[\begin{align*}R_e &= \sqrt{\dfrac{(1.055 \times 10^{34} \ J\cdot s)}{2\pi (1.603\times 10^{27} \ kg)(2.94\times 10^{11} \ Hz)}}\\ &= 1.899\times 10^{10} \ m=1.89 \ \stackrel{\circ}{A}\end{align*}\]
Exercise \(\PageIndex{6}\)
Use the frequency of the \(J = 0\) to \(J = 1\) transition observed for carbon monoxide to determine a bond length for carbon monoxide.
Advanced: nonRigid Rotors
Centrifugal stretching of the bond as \(J\) increases causes the decrease in the spacing between the lines in an observed spectrum (Table \(\PageIndex{1}\)). This decrease shows that the molecule is not really a rigid rotor. As the rotational angular momentum increases with increasing \(J\), the bond stretches. This stretching increases the moment of inertia and decreases the rotational constant (Figure \(\PageIndex{5}\)). Centrifugal stretching is exactly what you see if you swing a ball on a rubber band in a circle.
Figure \(\PageIndex{5}\): Two atoms connected by a vibrating bond. There is a rotation around the common center of mass, and oscillation in bond distance. Image used with permission (CC SABY, 3.0; www.cleonis.nl).
The effect of centrifugal stretching is smallest at low \(J\) values, so a good estimate for \(B\) can be obtained from the \(J = 0\) to \(J = 1\) transition. From \(B\), a value for the bond length of the molecule can be obtained since the moment of inertia that appears in the definition of \(B\) (Equation \(\ref{5.9.9}\)) is the reduced mass times the bond length squared.When the centrifugal stretching is taken into account quantitatively, the development of which is beyond the scope of the discussion here, a very accurate and precise value for B can be obtained from the observed transition frequencies because of their high precision. Rotational transition frequencies are routinely reported to 8 and 9 significant figures.
As we have just seen, quantum theory successfully predicts the line spacing in a rotational spectrum. An additional feature of the spectrum is the line intensities. The lines in a rotational spectrum do not all have the same intensity, as can be seen in Figure \(\PageIndex{3}\) and Table \(\PageIndex{1}\). The maximum absorption coefficient for each line, \(\gamma _{max}\), is proportional to the magnitude of the transition moment, \(\mu _T\) which is given by Equation \(\ref{5.9.2}\), and to the population difference between the initial and final states, \(\Delta n\). Since \(\Delta n\) is the difference in the number of molecules present in the two states per unit volume, it is actually a difference in number density. This will be discussed in more detail in the following chapters
Contributors
Adapted from "Quantum States of Atoms and Molecules" by David M. Hanson, Erica Harvey, Robert Sweeney, Theresa Julia Zielinski