# 11.8: The Ideal Gas Law- Pressure, Volume, Temperature, and Moles

- Page ID
- 47539

There are a number of chemical reactions that require ammonia. In order to carry out the reaction efficiently, we need to know how much ammonia we have for stoichiometric purposes. Using gas laws, we can determine the number of moles present in the tank if we know the volume, temperature, and pressure of the system.

## Ideal Gas Law

The combined gas law shows that the pressure of a gas is inversely proportional to volume and directly proportional to temperature. Avogadro's Law shows that volume or pressure is directly proportional to the number of moles of gas. putting these together leaves us with the following equation:

\[\dfrac{P_1 \times V_1}{T_1 \times n_1} = \dfrac{P_2 \times V_2}{T_2 \times n_2}\]

As with the other gas laws, we can also say that \(\frac{\left( P \times V \right)}{\left( T \times n \right)}\) is equal to a constant. The constant can be evaluated provided that the gas being described is considered to be ideal.

The **ideal gas law** is a single equation which relates the pressure, volume, temperature, and number of moles of an ideal gas. If we substitute in the variable \(R\) for the constant, the equation becomes:

\[\dfrac{P \times V}{T \times n} = R\]

The ideal gas law is conveniently rearranged to look this way, with the multiplication sings omitted:

\[PV = nRT\]

The variable \(R\) in the equation is called the **ideal gas constant**.

## Evaluating the Ideal Gas Constant

The value of \(R\), the ideal gas constant, depends on the units chosen for pressure, temperature, and volume in the ideal gas equation. It is necessary to use Kelvin for the temperature and it is conventional to use the SI unit of liters for the volume. However, pressure is commonly measured in one of three units: \(\text{kPa}\), \(\text{atm}\), or \(\text{mm} \: \ce{Hg}\). Therefore, \(R\) can have three different values.

We will demonstrate how \(R\) is calculated when the pressure is measured in \(\text{kPa}\). The volume of \(1.00 \: \text{mol}\) of any gas at STP (Standard temperature, 273.15 K and pressure, 1 atm)is measured to be \(22.414 \: \text{L}\). We can substitute \(101.325 \: \text{kPa}\) for pressure, \(22.414 \: \text{L}\) for volume, and \(273.15 \: \text{K}\) for temperature into the ideal gas equation and solve for \(R\).

\[\begin{align*} R &= \frac{PV}{nT} \\[4pt] &= \frac{101.325 \: \text{kPa} \times 22.414 \: \text{L}}{1.000 \: \text{mol} \times 273.15 \: \text{K}} \\[4pt] &= 8.314 \: \text{kPa} \cdot \text{L/K} \cdot \text{mol} \end{align*}\]

This is the value of \(R\) that is to be used in the ideal gas equation when the pressure is given in \(\text{kPa}\). The table below shows a summary of this and the other possible values of \(R\). It is important to choose the correct value of \(R\) to use for a given problem.

Unit of \(P\) |
Unit of \(V\) |
Unit of \(n\) |
Unit of \(T\) |
Value and Unit of \(R\) |
---|---|---|---|---|

\(\text{kPa}\) | \(\text{L}\) | \(\text{mol}\) | \(\text{K}\) | \(8.314 \: \text{J/K} \cdot \text{mol}\) |

\(\text{atm}\) | \(\text{L}\) | \(\text{mol}\) | \(\text{K}\) | \(0.08206 \: \text{L} \cdot \text{atm/K} \cdot \text{mol}\) |

\(\text{mm} \: \ce{Hg}\) | \(\text{L}\) | \(\text{mol}\) | \(\text{K}\) | \(62.36 \: \text{L} \cdot \text{mm} \: \ce{Hg}/\text{K} \cdot \text{mol}\) |

Notice that the unit for \(R\) when the pressure is in \(\text{kPa}\) has been changed to \(\text{J/K} \cdot \text{mol}\). A kilopascal multiplied by a liter is equal to the SI unit for energy, a joule \(\left( \text{J} \right)\).

## Summary

- The ideal gas constant is calculated.
- An example of calculations using the ideal gas law is shown.

## Contributions & Attributions

This page was constructed from content via the following contributor(s) and edited (topically or extensively) by the LibreTexts development team to meet platform style, presentation, and quality:

CK-12 Foundation by Sharon Bewick, Richard Parsons, Therese Forsythe, Shonna Robinson, and Jean Dupon.

Henry Agnew (UC Davis)